Installer doesnt detect my windows partitions in /dev/sda [duplicate]












-4















This question already has an answer here:




  • Why does the Ubuntu installer not detect the hard drive during installation?

    4 answers



  • “Install alongside” option missing. How do I install Ubuntu beside Windows using “Something Else”?

    5 answers




Ok so in the installer I have no option to install ubuntu alongside windows (I have windows 7) after clicking on "Something else" I can see that my windows is installed on /dev/sda2 and the installer didn't notice it or something I think it checked /dev/sdb for my OS but it didn't find it so how can I change it to notice my OS?



My installer doesn't even detect the OS and I see every other option it says that it didn't detect ant operating systems I already have "taken" some memory and have Free space (100GB)



(this is the second time I post this question)










share|improve this question







New contributor




13D ART is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











marked as duplicate by guiverc, Eric Carvalho, Charles Green, Zanna, karel Dec 29 '18 at 19:43


This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.















  • Your other question was marked a duplicate; did you read the duplicate question & its answers? The most likely answer to your question [in my opinion] 'why isn't windows seen by installer' I can see is already provided in the answer to your other question (in the duplicate link), so we should we type the same thing out again?. If you have questions, ask them rather than repeating the same question (ask in comments, edit & change your question & put why you don't think it's duplicate, or better what you read, didn't understand [of the marked duplicate] or why you believe things don't apply)
    – guiverc
    Dec 29 '18 at 11:18








  • 3




    Possible duplicate of "Install alongside" option missing. How do I install Ubuntu beside Windows using "Something Else"? -- prior question is askubuntu.com/questions/1105170/…
    – guiverc
    Dec 29 '18 at 11:19












  • possibly see also Why does the Ubuntu installer not detect the hard drive during installation?
    – Zanna
    Dec 29 '18 at 18:48
















-4















This question already has an answer here:




  • Why does the Ubuntu installer not detect the hard drive during installation?

    4 answers



  • “Install alongside” option missing. How do I install Ubuntu beside Windows using “Something Else”?

    5 answers




Ok so in the installer I have no option to install ubuntu alongside windows (I have windows 7) after clicking on "Something else" I can see that my windows is installed on /dev/sda2 and the installer didn't notice it or something I think it checked /dev/sdb for my OS but it didn't find it so how can I change it to notice my OS?



My installer doesn't even detect the OS and I see every other option it says that it didn't detect ant operating systems I already have "taken" some memory and have Free space (100GB)



(this is the second time I post this question)










share|improve this question







New contributor




13D ART is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











marked as duplicate by guiverc, Eric Carvalho, Charles Green, Zanna, karel Dec 29 '18 at 19:43


This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.















  • Your other question was marked a duplicate; did you read the duplicate question & its answers? The most likely answer to your question [in my opinion] 'why isn't windows seen by installer' I can see is already provided in the answer to your other question (in the duplicate link), so we should we type the same thing out again?. If you have questions, ask them rather than repeating the same question (ask in comments, edit & change your question & put why you don't think it's duplicate, or better what you read, didn't understand [of the marked duplicate] or why you believe things don't apply)
    – guiverc
    Dec 29 '18 at 11:18








  • 3




    Possible duplicate of "Install alongside" option missing. How do I install Ubuntu beside Windows using "Something Else"? -- prior question is askubuntu.com/questions/1105170/…
    – guiverc
    Dec 29 '18 at 11:19












  • possibly see also Why does the Ubuntu installer not detect the hard drive during installation?
    – Zanna
    Dec 29 '18 at 18:48














-4












-4








-4








This question already has an answer here:




  • Why does the Ubuntu installer not detect the hard drive during installation?

    4 answers



  • “Install alongside” option missing. How do I install Ubuntu beside Windows using “Something Else”?

    5 answers




Ok so in the installer I have no option to install ubuntu alongside windows (I have windows 7) after clicking on "Something else" I can see that my windows is installed on /dev/sda2 and the installer didn't notice it or something I think it checked /dev/sdb for my OS but it didn't find it so how can I change it to notice my OS?



My installer doesn't even detect the OS and I see every other option it says that it didn't detect ant operating systems I already have "taken" some memory and have Free space (100GB)



(this is the second time I post this question)










share|improve this question







New contributor




13D ART is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.












This question already has an answer here:




  • Why does the Ubuntu installer not detect the hard drive during installation?

    4 answers



  • “Install alongside” option missing. How do I install Ubuntu beside Windows using “Something Else”?

    5 answers




Ok so in the installer I have no option to install ubuntu alongside windows (I have windows 7) after clicking on "Something else" I can see that my windows is installed on /dev/sda2 and the installer didn't notice it or something I think it checked /dev/sdb for my OS but it didn't find it so how can I change it to notice my OS?



My installer doesn't even detect the OS and I see every other option it says that it didn't detect ant operating systems I already have "taken" some memory and have Free space (100GB)



(this is the second time I post this question)





This question already has an answer here:




  • Why does the Ubuntu installer not detect the hard drive during installation?

    4 answers



  • “Install alongside” option missing. How do I install Ubuntu beside Windows using “Something Else”?

    5 answers








system-installation windows






share|improve this question







New contributor




13D ART is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











share|improve this question







New contributor




13D ART is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.









share|improve this question




share|improve this question






New contributor




13D ART is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.









asked Dec 29 '18 at 10:53









13D ART

12




12




New contributor




13D ART is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.





New contributor





13D ART is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.






13D ART is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.




marked as duplicate by guiverc, Eric Carvalho, Charles Green, Zanna, karel Dec 29 '18 at 19:43


This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.






marked as duplicate by guiverc, Eric Carvalho, Charles Green, Zanna, karel Dec 29 '18 at 19:43


This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.














  • Your other question was marked a duplicate; did you read the duplicate question & its answers? The most likely answer to your question [in my opinion] 'why isn't windows seen by installer' I can see is already provided in the answer to your other question (in the duplicate link), so we should we type the same thing out again?. If you have questions, ask them rather than repeating the same question (ask in comments, edit & change your question & put why you don't think it's duplicate, or better what you read, didn't understand [of the marked duplicate] or why you believe things don't apply)
    – guiverc
    Dec 29 '18 at 11:18








  • 3




    Possible duplicate of "Install alongside" option missing. How do I install Ubuntu beside Windows using "Something Else"? -- prior question is askubuntu.com/questions/1105170/…
    – guiverc
    Dec 29 '18 at 11:19












  • possibly see also Why does the Ubuntu installer not detect the hard drive during installation?
    – Zanna
    Dec 29 '18 at 18:48


















  • Your other question was marked a duplicate; did you read the duplicate question & its answers? The most likely answer to your question [in my opinion] 'why isn't windows seen by installer' I can see is already provided in the answer to your other question (in the duplicate link), so we should we type the same thing out again?. If you have questions, ask them rather than repeating the same question (ask in comments, edit & change your question & put why you don't think it's duplicate, or better what you read, didn't understand [of the marked duplicate] or why you believe things don't apply)
    – guiverc
    Dec 29 '18 at 11:18








  • 3




    Possible duplicate of "Install alongside" option missing. How do I install Ubuntu beside Windows using "Something Else"? -- prior question is askubuntu.com/questions/1105170/…
    – guiverc
    Dec 29 '18 at 11:19












  • possibly see also Why does the Ubuntu installer not detect the hard drive during installation?
    – Zanna
    Dec 29 '18 at 18:48
















Your other question was marked a duplicate; did you read the duplicate question & its answers? The most likely answer to your question [in my opinion] 'why isn't windows seen by installer' I can see is already provided in the answer to your other question (in the duplicate link), so we should we type the same thing out again?. If you have questions, ask them rather than repeating the same question (ask in comments, edit & change your question & put why you don't think it's duplicate, or better what you read, didn't understand [of the marked duplicate] or why you believe things don't apply)
– guiverc
Dec 29 '18 at 11:18






Your other question was marked a duplicate; did you read the duplicate question & its answers? The most likely answer to your question [in my opinion] 'why isn't windows seen by installer' I can see is already provided in the answer to your other question (in the duplicate link), so we should we type the same thing out again?. If you have questions, ask them rather than repeating the same question (ask in comments, edit & change your question & put why you don't think it's duplicate, or better what you read, didn't understand [of the marked duplicate] or why you believe things don't apply)
– guiverc
Dec 29 '18 at 11:18






3




3




Possible duplicate of "Install alongside" option missing. How do I install Ubuntu beside Windows using "Something Else"? -- prior question is askubuntu.com/questions/1105170/…
– guiverc
Dec 29 '18 at 11:19






Possible duplicate of "Install alongside" option missing. How do I install Ubuntu beside Windows using "Something Else"? -- prior question is askubuntu.com/questions/1105170/…
– guiverc
Dec 29 '18 at 11:19














possibly see also Why does the Ubuntu installer not detect the hard drive during installation?
– Zanna
Dec 29 '18 at 18:48




possibly see also Why does the Ubuntu installer not detect the hard drive during installation?
– Zanna
Dec 29 '18 at 18:48










1 Answer
1






active

oldest

votes


















0














I perceive this question as being slightly different from the alleged duplicate post, and since I encountered (and solved) exactly this issue yesterday, but not the issue described in the previous post, I will share my findings here. The warning that the NTFS drive was possibly damaged was disturbing but irrelevant. I found layers of issues, where fixing one problem revealed the next problem.



The key issue is that Ubuntu needs an AHCI SATA controller, which was not the default, and the laptop was configured at the factory to use a RAID SATA controller.



I have a Dell XPS 15 (9570) that I am installing Ubuntu on as a dual boot with Windows 10. These instructions were correct and complete. I thought that I would skip steps 2-4 and just change the SATA controller from RAID to AHCI in the BIOS without going into Windows Safe Mode - that was a mistake. Below I have paraphrased the steps that I followed from the reference I provided, which you will have to adapt if you do not have a Dell XPS 15:




  1. Start Windows 10.

  2. Press the Windows key and paste ‘Change advanced Startup Options’.

  3. Click ‘Restart Now’- your computer will switch a blue screen with
    some options.

  4. Click Troubleshoot -> Startup Settings -> Restart — This will restart your computer.

  5. When you see the Dell logo appear start pressing F2 repeatedly until you get into the Dell BIOS Settings.

  6. Once you see the BIOS menu, go to System Configuration -> SATA Operation and change it from ‘Raid On’ to ‘AHCI’

  7. Click Exit and Save. Your computer will reboot again.


I did not encounter any BitLocker issues, even though the NTFS partition was encrypted with BitLocker. The rest of the article I reference discussed the additional instructions necessary complete the Ubuntu installation - but I did not follow those instructions since I did not encounter video stability issues. I did find that my mouse stopped after 10 seconds, but after installing XFCE4 and switching to XFCE windows manager that went away. I prefer XFCE4 anyway.






share|improve this answer






























    1 Answer
    1






    active

    oldest

    votes








    1 Answer
    1






    active

    oldest

    votes









    active

    oldest

    votes






    active

    oldest

    votes









    0














    I perceive this question as being slightly different from the alleged duplicate post, and since I encountered (and solved) exactly this issue yesterday, but not the issue described in the previous post, I will share my findings here. The warning that the NTFS drive was possibly damaged was disturbing but irrelevant. I found layers of issues, where fixing one problem revealed the next problem.



    The key issue is that Ubuntu needs an AHCI SATA controller, which was not the default, and the laptop was configured at the factory to use a RAID SATA controller.



    I have a Dell XPS 15 (9570) that I am installing Ubuntu on as a dual boot with Windows 10. These instructions were correct and complete. I thought that I would skip steps 2-4 and just change the SATA controller from RAID to AHCI in the BIOS without going into Windows Safe Mode - that was a mistake. Below I have paraphrased the steps that I followed from the reference I provided, which you will have to adapt if you do not have a Dell XPS 15:




    1. Start Windows 10.

    2. Press the Windows key and paste ‘Change advanced Startup Options’.

    3. Click ‘Restart Now’- your computer will switch a blue screen with
      some options.

    4. Click Troubleshoot -> Startup Settings -> Restart — This will restart your computer.

    5. When you see the Dell logo appear start pressing F2 repeatedly until you get into the Dell BIOS Settings.

    6. Once you see the BIOS menu, go to System Configuration -> SATA Operation and change it from ‘Raid On’ to ‘AHCI’

    7. Click Exit and Save. Your computer will reboot again.


    I did not encounter any BitLocker issues, even though the NTFS partition was encrypted with BitLocker. The rest of the article I reference discussed the additional instructions necessary complete the Ubuntu installation - but I did not follow those instructions since I did not encounter video stability issues. I did find that my mouse stopped after 10 seconds, but after installing XFCE4 and switching to XFCE windows manager that went away. I prefer XFCE4 anyway.






    share|improve this answer




























      0














      I perceive this question as being slightly different from the alleged duplicate post, and since I encountered (and solved) exactly this issue yesterday, but not the issue described in the previous post, I will share my findings here. The warning that the NTFS drive was possibly damaged was disturbing but irrelevant. I found layers of issues, where fixing one problem revealed the next problem.



      The key issue is that Ubuntu needs an AHCI SATA controller, which was not the default, and the laptop was configured at the factory to use a RAID SATA controller.



      I have a Dell XPS 15 (9570) that I am installing Ubuntu on as a dual boot with Windows 10. These instructions were correct and complete. I thought that I would skip steps 2-4 and just change the SATA controller from RAID to AHCI in the BIOS without going into Windows Safe Mode - that was a mistake. Below I have paraphrased the steps that I followed from the reference I provided, which you will have to adapt if you do not have a Dell XPS 15:




      1. Start Windows 10.

      2. Press the Windows key and paste ‘Change advanced Startup Options’.

      3. Click ‘Restart Now’- your computer will switch a blue screen with
        some options.

      4. Click Troubleshoot -> Startup Settings -> Restart — This will restart your computer.

      5. When you see the Dell logo appear start pressing F2 repeatedly until you get into the Dell BIOS Settings.

      6. Once you see the BIOS menu, go to System Configuration -> SATA Operation and change it from ‘Raid On’ to ‘AHCI’

      7. Click Exit and Save. Your computer will reboot again.


      I did not encounter any BitLocker issues, even though the NTFS partition was encrypted with BitLocker. The rest of the article I reference discussed the additional instructions necessary complete the Ubuntu installation - but I did not follow those instructions since I did not encounter video stability issues. I did find that my mouse stopped after 10 seconds, but after installing XFCE4 and switching to XFCE windows manager that went away. I prefer XFCE4 anyway.






      share|improve this answer


























        0












        0








        0






        I perceive this question as being slightly different from the alleged duplicate post, and since I encountered (and solved) exactly this issue yesterday, but not the issue described in the previous post, I will share my findings here. The warning that the NTFS drive was possibly damaged was disturbing but irrelevant. I found layers of issues, where fixing one problem revealed the next problem.



        The key issue is that Ubuntu needs an AHCI SATA controller, which was not the default, and the laptop was configured at the factory to use a RAID SATA controller.



        I have a Dell XPS 15 (9570) that I am installing Ubuntu on as a dual boot with Windows 10. These instructions were correct and complete. I thought that I would skip steps 2-4 and just change the SATA controller from RAID to AHCI in the BIOS without going into Windows Safe Mode - that was a mistake. Below I have paraphrased the steps that I followed from the reference I provided, which you will have to adapt if you do not have a Dell XPS 15:




        1. Start Windows 10.

        2. Press the Windows key and paste ‘Change advanced Startup Options’.

        3. Click ‘Restart Now’- your computer will switch a blue screen with
          some options.

        4. Click Troubleshoot -> Startup Settings -> Restart — This will restart your computer.

        5. When you see the Dell logo appear start pressing F2 repeatedly until you get into the Dell BIOS Settings.

        6. Once you see the BIOS menu, go to System Configuration -> SATA Operation and change it from ‘Raid On’ to ‘AHCI’

        7. Click Exit and Save. Your computer will reboot again.


        I did not encounter any BitLocker issues, even though the NTFS partition was encrypted with BitLocker. The rest of the article I reference discussed the additional instructions necessary complete the Ubuntu installation - but I did not follow those instructions since I did not encounter video stability issues. I did find that my mouse stopped after 10 seconds, but after installing XFCE4 and switching to XFCE windows manager that went away. I prefer XFCE4 anyway.






        share|improve this answer














        I perceive this question as being slightly different from the alleged duplicate post, and since I encountered (and solved) exactly this issue yesterday, but not the issue described in the previous post, I will share my findings here. The warning that the NTFS drive was possibly damaged was disturbing but irrelevant. I found layers of issues, where fixing one problem revealed the next problem.



        The key issue is that Ubuntu needs an AHCI SATA controller, which was not the default, and the laptop was configured at the factory to use a RAID SATA controller.



        I have a Dell XPS 15 (9570) that I am installing Ubuntu on as a dual boot with Windows 10. These instructions were correct and complete. I thought that I would skip steps 2-4 and just change the SATA controller from RAID to AHCI in the BIOS without going into Windows Safe Mode - that was a mistake. Below I have paraphrased the steps that I followed from the reference I provided, which you will have to adapt if you do not have a Dell XPS 15:




        1. Start Windows 10.

        2. Press the Windows key and paste ‘Change advanced Startup Options’.

        3. Click ‘Restart Now’- your computer will switch a blue screen with
          some options.

        4. Click Troubleshoot -> Startup Settings -> Restart — This will restart your computer.

        5. When you see the Dell logo appear start pressing F2 repeatedly until you get into the Dell BIOS Settings.

        6. Once you see the BIOS menu, go to System Configuration -> SATA Operation and change it from ‘Raid On’ to ‘AHCI’

        7. Click Exit and Save. Your computer will reboot again.


        I did not encounter any BitLocker issues, even though the NTFS partition was encrypted with BitLocker. The rest of the article I reference discussed the additional instructions necessary complete the Ubuntu installation - but I did not follow those instructions since I did not encounter video stability issues. I did find that my mouse stopped after 10 seconds, but after installing XFCE4 and switching to XFCE windows manager that went away. I prefer XFCE4 anyway.







        share|improve this answer














        share|improve this answer



        share|improve this answer








        edited Dec 29 '18 at 19:42

























        answered Dec 29 '18 at 19:34









        Mike Slinn

        13118




        13118















            Popular posts from this blog

            Human spaceflight

            Can not write log (Is /dev/pts mounted?) - openpty in Ubuntu-on-Windows?

            張江高科駅