Patch holes on engineered wood (masonite) siding and mounting security camera
.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty{ margin-bottom:0;
}
I have a camera mounted on a wood plank which in turn is mounted on the siding of the garage. Fortunately, it's under the eaves and I didn't see any water getting to this area in the rain.
The dark wood plank looks ugly to me, so I want to get rid of it and either (1) mount the camera directly to the siding or (2) use some kind of a siding mounting block that is small and paintable.
Unfortunately, behind the wood plank, there are 3 holes, each about 1-inch in diameter. Looks like the installer drilled a hole and hit the stud, so drilled another hole, which also hit the stud, and finally on 3rd try, it went through all the way inside.
My questions are:
Should I mount the camera directly to the siding, or use some kind of a siding mounting block? If I want to upgrade the camera at some point, would it be better to use a mounting block?
What do I do with the 3rd hole (where the wire currently goes through) to make it smaller, less visible, and water proof?
How do I patch the 1st and 2nd holes (which serve no purpose)?
Three screws are currently holding the wood plank. How do I patch 3 screw holes once I get rid of the plank?
I'm very new at this, so I'd appreciate any insight you could provide. Thank you so much!
siding
edited Feb 11 at 2:01
JakeGould
118117
asked Feb 10 at 18:14
K. DonK. Don
304
add a comment |
I have a camera mounted on a wood plank which in turn is mounted on the siding of the garage. Fortunately, it's under the eaves and I didn't see any water getting to this area in the rain.
The dark wood plank looks ugly to me, so I want to get rid of it and either (1) mount the camera directly to the siding or (2) use some kind of a siding mounting block that is small and paintable.
Unfortunately, behind the wood plank, there are 3 holes, each about 1-inch in diameter. Looks like the installer drilled a hole and hit the stud, so drilled another hole, which also hit the stud, and finally on 3rd try, it went through all the way inside.
My questions are:
Should I mount the camera directly to the siding, or use some kind of a siding mounting block? If I want to upgrade the camera at some point, would it be better to use a mounting block?
What do I do with the 3rd hole (where the wire currently goes through) to make it smaller, less visible, and water proof?
How do I patch the 1st and 2nd holes (which serve no purpose)?
Three screws are currently holding the wood plank. How do I patch 3 screw holes once I get rid of the plank?
I'm very new at this, so I'd appreciate any insight you could provide. Thank you so much!
siding
edited Feb 11 at 2:01
JakeGould
118117
asked Feb 10 at 18:14
K. DonK. Don
304
add a comment |
I have a camera mounted on a wood plank which in turn is mounted on the siding of the garage. Fortunately, it's under the eaves and I didn't see any water getting to this area in the rain.
The dark wood plank looks ugly to me, so I want to get rid of it and either (1) mount the camera directly to the siding or (2) use some kind of a siding mounting block that is small and paintable.
Unfortunately, behind the wood plank, there are 3 holes, each about 1-inch in diameter. Looks like the installer drilled a hole and hit the stud, so drilled another hole, which also hit the stud, and finally on 3rd try, it went through all the way inside.
My questions are:
Should I mount the camera directly to the siding, or use some kind of a siding mounting block? If I want to upgrade the camera at some point, would it be better to use a mounting block?
What do I do with the 3rd hole (where the wire currently goes through) to make it smaller, less visible, and water proof?
How do I patch the 1st and 2nd holes (which serve no purpose)?
Three screws are currently holding the wood plank. How do I patch 3 screw holes once I get rid of the plank?
I'm very new at this, so I'd appreciate any insight you could provide. Thank you so much!
siding
edited Feb 11 at 2:01
JakeGould
118117
asked Feb 10 at 18:14
K. DonK. Don
304
I have a camera mounted on a wood plank which in turn is mounted on the siding of the garage. Fortunately, it's under the eaves and I didn't see any water getting to this area in the rain.
The dark wood plank looks ugly to me, so I want to get rid of it and either (1) mount the camera directly to the siding or (2) use some kind of a siding mounting block that is small and paintable.
Unfortunately, behind the wood plank, there are 3 holes, each about 1-inch in diameter. Looks like the installer drilled a hole and hit the stud, so drilled another hole, which also hit the stud, and finally on 3rd try, it went through all the way inside.
My questions are:
Should I mount the camera directly to the siding, or use some kind of a siding mounting block? If I want to upgrade the camera at some point, would it be better to use a mounting block?
What do I do with the 3rd hole (where the wire currently goes through) to make it smaller, less visible, and water proof?
How do I patch the 1st and 2nd holes (which serve no purpose)?
Three screws are currently holding the wood plank. How do I patch 3 screw holes once I get rid of the plank?
I'm very new at this, so I'd appreciate any insight you could provide. Thank you so much!
siding
siding
edited Feb 11 at 2:01
JakeGould
118117
asked Feb 10 at 18:14
K. DonK. Don
304
edited Feb 11 at 2:01
JakeGould
118117
asked Feb 10 at 18:14
K. DonK. Don
304
edited Feb 11 at 2:01
JakeGould
118117
edited Feb 11 at 2:01
JakeGould
118117
edited Feb 11 at 2:01
JakeGould
118117
118117
asked Feb 10 at 18:14
K. DonK. Don
304
asked Feb 10 at 18:14
K. DonK. Don
304
asked Feb 10 at 18:14
K. DonK. Don
304
304
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
You could use this Exterior Post Top and either paint or stain it before installation. It already has a hole drilled in the center where you can run the wire through. You can also use the siding groove (where the holes are drilled) as a raceway for the wiring. This will prevent you from pinching the wire when you affix it to the wall. You can fasten this plate with two or three screws in such a way that your camera would cover them. All that would be left is that tiny hole at the top where the screw is. Just caulk that and touch it up with some paint.
answered Feb 10 at 19:02
Jerry_ContraryJerry_Contrary
3,307323
That's an attractive and ingenious solution.
– fred_dot_u
Feb 10 at 20:24
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "73"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdiy.stackexchange.com%2fquestions%2f157248%2fpatch-holes-on-engineered-wood-masonite-siding-and-mounting-security-camera%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
You could use this Exterior Post Top and either paint or stain it before installation. It already has a hole drilled in the center where you can run the wire through. You can also use the siding groove (where the holes are drilled) as a raceway for the wiring. This will prevent you from pinching the wire when you affix it to the wall. You can fasten this plate with two or three screws in such a way that your camera would cover them. All that would be left is that tiny hole at the top where the screw is. Just caulk that and touch it up with some paint.
answered Feb 10 at 19:02
Jerry_ContraryJerry_Contrary
3,307323
That's an attractive and ingenious solution.
– fred_dot_u
Feb 10 at 20:24
add a comment |
You could use this Exterior Post Top and either paint or stain it before installation. It already has a hole drilled in the center where you can run the wire through. You can also use the siding groove (where the holes are drilled) as a raceway for the wiring. This will prevent you from pinching the wire when you affix it to the wall. You can fasten this plate with two or three screws in such a way that your camera would cover them. All that would be left is that tiny hole at the top where the screw is. Just caulk that and touch it up with some paint.
answered Feb 10 at 19:02
Jerry_ContraryJerry_Contrary
3,307323
That's an attractive and ingenious solution.
– fred_dot_u
Feb 10 at 20:24
add a comment |
You could use this Exterior Post Top and either paint or stain it before installation. It already has a hole drilled in the center where you can run the wire through. You can also use the siding groove (where the holes are drilled) as a raceway for the wiring. This will prevent you from pinching the wire when you affix it to the wall. You can fasten this plate with two or three screws in such a way that your camera would cover them. All that would be left is that tiny hole at the top where the screw is. Just caulk that and touch it up with some paint.
answered Feb 10 at 19:02
Jerry_ContraryJerry_Contrary
3,307323
You could use this Exterior Post Top and either paint or stain it before installation. It already has a hole drilled in the center where you can run the wire through. You can also use the siding groove (where the holes are drilled) as a raceway for the wiring. This will prevent you from pinching the wire when you affix it to the wall. You can fasten this plate with two or three screws in such a way that your camera would cover them. All that would be left is that tiny hole at the top where the screw is. Just caulk that and touch it up with some paint.
answered Feb 10 at 19:02
Jerry_ContraryJerry_Contrary
3,307323
answered Feb 10 at 19:02
Jerry_ContraryJerry_Contrary
3,307323
answered Feb 10 at 19:02
Jerry_ContraryJerry_Contrary
3,307323
answered Feb 10 at 19:02
Jerry_ContraryJerry_Contrary
3,307323
3,307323
That's an attractive and ingenious solution.
– fred_dot_u
Feb 10 at 20:24
add a comment |
That's an attractive and ingenious solution.
– fred_dot_u
Feb 10 at 20:24
That's an attractive and ingenious solution.
– fred_dot_u
Feb 10 at 20:24
That's an attractive and ingenious solution.
– fred_dot_u
Feb 10 at 20:24
add a comment |
Thanks for contributing an answer to Home Improvement Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdiy.stackexchange.com%2fquestions%2f157248%2fpatch-holes-on-engineered-wood-masonite-siding-and-mounting-security-camera%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
