Kernel 4.18 WiFi












0















Since upgrading kernel, my WiFi no longer works, and after downgrading as an attempt to fix, not only does WiFi in-built adapter not work, but onboard Gigabit Ethernet doesn't work either.



I've checked the following:



Works


  • USB NetGear, Inc. WNA1100 Wireless-N 150 [Atheros AR9271]



Do not work


  • 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)

  • 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter


I've also got my lsmod output in a pastebin here



I've checked kern.log and syslog to confirm wifi firmware is present and being loaded.



Here is pastebin of an output of some wpa_cli commands



I think perhaps the firmware might be the malfunction even though the file is there, because the device refuses (with FAIL) to give me the manufacturer or device details in wpa_cli



But strangely it does let me set country, responds to scan and list_networks (although with zero results)



Edit: lshw -C network seems to show firmware=N/A... DAMN it must be FW










share|improve this question



























    0















    Since upgrading kernel, my WiFi no longer works, and after downgrading as an attempt to fix, not only does WiFi in-built adapter not work, but onboard Gigabit Ethernet doesn't work either.



    I've checked the following:



    Works


    • USB NetGear, Inc. WNA1100 Wireless-N 150 [Atheros AR9271]



    Do not work


    • 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)

    • 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter


    I've also got my lsmod output in a pastebin here



    I've checked kern.log and syslog to confirm wifi firmware is present and being loaded.



    Here is pastebin of an output of some wpa_cli commands



    I think perhaps the firmware might be the malfunction even though the file is there, because the device refuses (with FAIL) to give me the manufacturer or device details in wpa_cli



    But strangely it does let me set country, responds to scan and list_networks (although with zero results)



    Edit: lshw -C network seems to show firmware=N/A... DAMN it must be FW










    share|improve this question

























      0












      0








      0








      Since upgrading kernel, my WiFi no longer works, and after downgrading as an attempt to fix, not only does WiFi in-built adapter not work, but onboard Gigabit Ethernet doesn't work either.



      I've checked the following:



      Works


      • USB NetGear, Inc. WNA1100 Wireless-N 150 [Atheros AR9271]



      Do not work


      • 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)

      • 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter


      I've also got my lsmod output in a pastebin here



      I've checked kern.log and syslog to confirm wifi firmware is present and being loaded.



      Here is pastebin of an output of some wpa_cli commands



      I think perhaps the firmware might be the malfunction even though the file is there, because the device refuses (with FAIL) to give me the manufacturer or device details in wpa_cli



      But strangely it does let me set country, responds to scan and list_networks (although with zero results)



      Edit: lshw -C network seems to show firmware=N/A... DAMN it must be FW










      share|improve this question














      Since upgrading kernel, my WiFi no longer works, and after downgrading as an attempt to fix, not only does WiFi in-built adapter not work, but onboard Gigabit Ethernet doesn't work either.



      I've checked the following:



      Works


      • USB NetGear, Inc. WNA1100 Wireless-N 150 [Atheros AR9271]



      Do not work


      • 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)

      • 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter


      I've also got my lsmod output in a pastebin here



      I've checked kern.log and syslog to confirm wifi firmware is present and being loaded.



      Here is pastebin of an output of some wpa_cli commands



      I think perhaps the firmware might be the malfunction even though the file is there, because the device refuses (with FAIL) to give me the manufacturer or device details in wpa_cli



      But strangely it does let me set country, responds to scan and list_networks (although with zero results)



      Edit: lshw -C network seems to show firmware=N/A... DAMN it must be FW







      networking drivers wireless 18.04 realtek






      share|improve this question













      share|improve this question











      share|improve this question




      share|improve this question










      asked Jan 6 at 21:44









      MrMeseesMrMesees

      1188




      1188






















          1 Answer
          1






          active

          oldest

          votes


















          0














          So it turns out according to this (outdated branch) 4.18 has updated drivers in some inconvenient way



          sudo apt-get install linux-headers-$(uname -r) gcc g++ build-essential dkms libelf-dev git
          git clone git@github.com:lwfinger/rtlwifi_new
          cd rtlwifi_new/
          git checkout extended
          make
          sudo make install
          sudo modprobe -rv rtl8723be
          sudo modprobe -r rtl8723be
          sudo modprobe rtl8723be


          Before changing drivers or whilst using Network or USB wifi is what saved me. I Hope it helps someone else. And would love it if someone from Canonical and/or Debian could reach out to me, as I'd be interested in getting this into the distro(s) so others don't need to chase down the info. I'm lucky enough this wasn't my main so I just didn't use the laptop for a week, prior to solving today.



          UPDATE



          Be careful about the top link antenna selection code. You'll notice it's not in the list of commands I ran, but I just found this in the issues on the repo






          share|improve this answer





















          • 1





            Why install dkms and not use it?

            – Jeremy31
            Jan 6 at 22:18











          • part of their documentation, so I don't know would be an easy answer, but the driver works. If removing that part this still works, then go forth and do so

            – MrMesees
            Jan 8 at 8:54











          • If you don't use dkms, you have to recompile and reinstall for every kernel update manually

            – Jeremy31
            Jan 8 at 10:01











          • So I suppose that answers why dkms ;)

            – MrMesees
            Jan 10 at 7:07











          Your Answer








          StackExchange.ready(function() {
          var channelOptions = {
          tags: "".split(" "),
          id: "89"
          };
          initTagRenderer("".split(" "), "".split(" "), channelOptions);

          StackExchange.using("externalEditor", function() {
          // Have to fire editor after snippets, if snippets enabled
          if (StackExchange.settings.snippets.snippetsEnabled) {
          StackExchange.using("snippets", function() {
          createEditor();
          });
          }
          else {
          createEditor();
          }
          });

          function createEditor() {
          StackExchange.prepareEditor({
          heartbeatType: 'answer',
          autoActivateHeartbeat: false,
          convertImagesToLinks: true,
          noModals: true,
          showLowRepImageUploadWarning: true,
          reputationToPostImages: 10,
          bindNavPrevention: true,
          postfix: "",
          imageUploader: {
          brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
          contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
          allowUrls: true
          },
          onDemand: true,
          discardSelector: ".discard-answer"
          ,immediatelyShowMarkdownHelp:true
          });


          }
          });














          draft saved

          draft discarded


















          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1107528%2fkernel-4-18-wifi%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown

























          1 Answer
          1






          active

          oldest

          votes








          1 Answer
          1






          active

          oldest

          votes









          active

          oldest

          votes






          active

          oldest

          votes









          0














          So it turns out according to this (outdated branch) 4.18 has updated drivers in some inconvenient way



          sudo apt-get install linux-headers-$(uname -r) gcc g++ build-essential dkms libelf-dev git
          git clone git@github.com:lwfinger/rtlwifi_new
          cd rtlwifi_new/
          git checkout extended
          make
          sudo make install
          sudo modprobe -rv rtl8723be
          sudo modprobe -r rtl8723be
          sudo modprobe rtl8723be


          Before changing drivers or whilst using Network or USB wifi is what saved me. I Hope it helps someone else. And would love it if someone from Canonical and/or Debian could reach out to me, as I'd be interested in getting this into the distro(s) so others don't need to chase down the info. I'm lucky enough this wasn't my main so I just didn't use the laptop for a week, prior to solving today.



          UPDATE



          Be careful about the top link antenna selection code. You'll notice it's not in the list of commands I ran, but I just found this in the issues on the repo






          share|improve this answer





















          • 1





            Why install dkms and not use it?

            – Jeremy31
            Jan 6 at 22:18











          • part of their documentation, so I don't know would be an easy answer, but the driver works. If removing that part this still works, then go forth and do so

            – MrMesees
            Jan 8 at 8:54











          • If you don't use dkms, you have to recompile and reinstall for every kernel update manually

            – Jeremy31
            Jan 8 at 10:01











          • So I suppose that answers why dkms ;)

            – MrMesees
            Jan 10 at 7:07
















          0














          So it turns out according to this (outdated branch) 4.18 has updated drivers in some inconvenient way



          sudo apt-get install linux-headers-$(uname -r) gcc g++ build-essential dkms libelf-dev git
          git clone git@github.com:lwfinger/rtlwifi_new
          cd rtlwifi_new/
          git checkout extended
          make
          sudo make install
          sudo modprobe -rv rtl8723be
          sudo modprobe -r rtl8723be
          sudo modprobe rtl8723be


          Before changing drivers or whilst using Network or USB wifi is what saved me. I Hope it helps someone else. And would love it if someone from Canonical and/or Debian could reach out to me, as I'd be interested in getting this into the distro(s) so others don't need to chase down the info. I'm lucky enough this wasn't my main so I just didn't use the laptop for a week, prior to solving today.



          UPDATE



          Be careful about the top link antenna selection code. You'll notice it's not in the list of commands I ran, but I just found this in the issues on the repo






          share|improve this answer





















          • 1





            Why install dkms and not use it?

            – Jeremy31
            Jan 6 at 22:18











          • part of their documentation, so I don't know would be an easy answer, but the driver works. If removing that part this still works, then go forth and do so

            – MrMesees
            Jan 8 at 8:54











          • If you don't use dkms, you have to recompile and reinstall for every kernel update manually

            – Jeremy31
            Jan 8 at 10:01











          • So I suppose that answers why dkms ;)

            – MrMesees
            Jan 10 at 7:07














          0












          0








          0







          So it turns out according to this (outdated branch) 4.18 has updated drivers in some inconvenient way



          sudo apt-get install linux-headers-$(uname -r) gcc g++ build-essential dkms libelf-dev git
          git clone git@github.com:lwfinger/rtlwifi_new
          cd rtlwifi_new/
          git checkout extended
          make
          sudo make install
          sudo modprobe -rv rtl8723be
          sudo modprobe -r rtl8723be
          sudo modprobe rtl8723be


          Before changing drivers or whilst using Network or USB wifi is what saved me. I Hope it helps someone else. And would love it if someone from Canonical and/or Debian could reach out to me, as I'd be interested in getting this into the distro(s) so others don't need to chase down the info. I'm lucky enough this wasn't my main so I just didn't use the laptop for a week, prior to solving today.



          UPDATE



          Be careful about the top link antenna selection code. You'll notice it's not in the list of commands I ran, but I just found this in the issues on the repo






          share|improve this answer















          So it turns out according to this (outdated branch) 4.18 has updated drivers in some inconvenient way



          sudo apt-get install linux-headers-$(uname -r) gcc g++ build-essential dkms libelf-dev git
          git clone git@github.com:lwfinger/rtlwifi_new
          cd rtlwifi_new/
          git checkout extended
          make
          sudo make install
          sudo modprobe -rv rtl8723be
          sudo modprobe -r rtl8723be
          sudo modprobe rtl8723be


          Before changing drivers or whilst using Network or USB wifi is what saved me. I Hope it helps someone else. And would love it if someone from Canonical and/or Debian could reach out to me, as I'd be interested in getting this into the distro(s) so others don't need to chase down the info. I'm lucky enough this wasn't my main so I just didn't use the laptop for a week, prior to solving today.



          UPDATE



          Be careful about the top link antenna selection code. You'll notice it's not in the list of commands I ran, but I just found this in the issues on the repo







          share|improve this answer














          share|improve this answer



          share|improve this answer








          edited Jan 6 at 22:15

























          answered Jan 6 at 22:08









          MrMeseesMrMesees

          1188




          1188








          • 1





            Why install dkms and not use it?

            – Jeremy31
            Jan 6 at 22:18











          • part of their documentation, so I don't know would be an easy answer, but the driver works. If removing that part this still works, then go forth and do so

            – MrMesees
            Jan 8 at 8:54











          • If you don't use dkms, you have to recompile and reinstall for every kernel update manually

            – Jeremy31
            Jan 8 at 10:01











          • So I suppose that answers why dkms ;)

            – MrMesees
            Jan 10 at 7:07














          • 1





            Why install dkms and not use it?

            – Jeremy31
            Jan 6 at 22:18











          • part of their documentation, so I don't know would be an easy answer, but the driver works. If removing that part this still works, then go forth and do so

            – MrMesees
            Jan 8 at 8:54











          • If you don't use dkms, you have to recompile and reinstall for every kernel update manually

            – Jeremy31
            Jan 8 at 10:01











          • So I suppose that answers why dkms ;)

            – MrMesees
            Jan 10 at 7:07








          1




          1





          Why install dkms and not use it?

          – Jeremy31
          Jan 6 at 22:18





          Why install dkms and not use it?

          – Jeremy31
          Jan 6 at 22:18













          part of their documentation, so I don't know would be an easy answer, but the driver works. If removing that part this still works, then go forth and do so

          – MrMesees
          Jan 8 at 8:54





          part of their documentation, so I don't know would be an easy answer, but the driver works. If removing that part this still works, then go forth and do so

          – MrMesees
          Jan 8 at 8:54













          If you don't use dkms, you have to recompile and reinstall for every kernel update manually

          – Jeremy31
          Jan 8 at 10:01





          If you don't use dkms, you have to recompile and reinstall for every kernel update manually

          – Jeremy31
          Jan 8 at 10:01













          So I suppose that answers why dkms ;)

          – MrMesees
          Jan 10 at 7:07





          So I suppose that answers why dkms ;)

          – MrMesees
          Jan 10 at 7:07


















          draft saved

          draft discarded




















































          Thanks for contributing an answer to Ask Ubuntu!


          • Please be sure to answer the question. Provide details and share your research!

          But avoid



          • Asking for help, clarification, or responding to other answers.

          • Making statements based on opinion; back them up with references or personal experience.


          To learn more, see our tips on writing great answers.




          draft saved


          draft discarded














          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1107528%2fkernel-4-18-wifi%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown





















































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown

































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown







          Popular posts from this blog

          Human spaceflight

          Can not write log (Is /dev/pts mounted?) - openpty in Ubuntu-on-Windows?

          張江高科駅