How to make a HTML file on Apache webserver accessible from other devices and locations via a web browser
[I have already installed and set up Apache2; this is not a duplicate question, please see below]
I have uploaded a HTML file to the Apache2 localhost web server, using the default :8000 port. I want this file to be accessible via a web browser on another device in another location, by entering a WWW domain into a search engine. In other words, I want to create a fully accessible website while keeping the HTML files for my website on the Apache web server.
I would appreciate any help I can get.
16.04 networking server apache2 html
asked Jan 5 at 18:59
Ruairí MásúnRuairí Másún
95
add a comment |
[I have already installed and set up Apache2; this is not a duplicate question, please see below]
I have uploaded a HTML file to the Apache2 localhost web server, using the default :8000 port. I want this file to be accessible via a web browser on another device in another location, by entering a WWW domain into a search engine. In other words, I want to create a fully accessible website while keeping the HTML files for my website on the Apache web server.
I would appreciate any help I can get.
16.04 networking server apache2 html
asked Jan 5 at 18:59
Ruairí MásúnRuairí Másún
95
add a comment |
[I have already installed and set up Apache2; this is not a duplicate question, please see below]
I have uploaded a HTML file to the Apache2 localhost web server, using the default :8000 port. I want this file to be accessible via a web browser on another device in another location, by entering a WWW domain into a search engine. In other words, I want to create a fully accessible website while keeping the HTML files for my website on the Apache web server.
I would appreciate any help I can get.
16.04 networking server apache2 html
asked Jan 5 at 18:59
Ruairí MásúnRuairí Másún
95
[I have already installed and set up Apache2; this is not a duplicate question, please see below]
I have uploaded a HTML file to the Apache2 localhost web server, using the default :8000 port. I want this file to be accessible via a web browser on another device in another location, by entering a WWW domain into a search engine. In other words, I want to create a fully accessible website while keeping the HTML files for my website on the Apache web server.
I would appreciate any help I can get.
16.04 networking server apache2 html
16.04 networking server apache2 html
asked Jan 5 at 18:59
Ruairí MásúnRuairí Másún
95
asked Jan 5 at 18:59
Ruairí MásúnRuairí Másún
95
edited Jan 5 at 19:09
Ruairí Másún
asked Jan 5 at 18:59
Ruairí MásúnRuairí Másún
95
asked Jan 5 at 18:59
Ruairí MásúnRuairí Másún
95
asked Jan 5 at 18:59
Ruairí MásúnRuairí Másún
95
95
add a comment |
add a comment |
2 Answers
2
active
oldest
votes
In addition to the answers of thirteen3054:
After creating the new file index.conf you should enable it via:
sudo a2ensite index.conf
Doing that enables the specified site within the apache2 configuration. It does this by creating symlinks within /etc/apache2/sites-enabled. (Likewise, "a2dissite" disables a site by removing those symlinks.)
answered Jan 5 at 19:27
E. YagmahanE. Yagmahan
465
add a comment |
Place the file like this /var/www/html/index.html. Then go to /etc/apache2/sites-available, here create a file index.conf and add the following
<VirtualHost *:80>
ServerName test.com
ServerAdmin info@test.com
ServerAlias www.test.com
DocumentRoot /var/www/html
<Directory /var/www/html>
Require all granted
</Directory>
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
</VirtualHost>
As I did forgot and E. Yagmahan mentioned save your file and run this command:
sudo a2ensite index.conf
This command will enable your configuration file.
After all that run this:
sudo systemctl restart apache2
answered Jan 5 at 19:16
thirteen3054thirteen3054
64
Thanks, I will try this out. By the way, I was advise by a friend who does CS not to use the :80 port, and to use another one instead. Is he right, or is there any reason in not wanting to use the :80 port?
– Ruairí Másún
Jan 5 at 19:20
httpd.apache.org/docs/2.4/vhosts/examples.html read this. Port 80 is used for http making it a reserve port.
– thirteen3054
Jan 5 at 19:34
1
@RuairíMásún if you intendhttp://domain.tld/to go directrly to the site you need to use port 80. Your friend who does "CS" is not familiar with IT networking, but they're probably trying to shield you from typical HTTP based attack vectors and port scanners, but that's just security through obscurity and is useless in the long run. (FYI: I'm an IT Security professional so I'm speaking from some levels of experience here.)
– Thomas Ward♦
Jan 5 at 19:35
If you have a custom application that does not run asrootor doesn't get served directly by Apache, then yes you would use port 8000. But that's not the case when Apache itself is serving the files.
– Thomas Ward♦
Jan 5 at 19:36
I can't create a new file in the /etc/apache2/sites-available directory directly. Am I able to do this using Terminal? If so, how do I do it? I've opened the Terminal in that directory.
– Ruairí Másún
Jan 5 at 19:55
|
show 9 more comments
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1107241%2fhow-to-make-a-html-file-on-apache-webserver-accessible-from-other-devices-and-lo%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
In addition to the answers of thirteen3054:
After creating the new file index.conf you should enable it via:
sudo a2ensite index.conf
Doing that enables the specified site within the apache2 configuration. It does this by creating symlinks within /etc/apache2/sites-enabled. (Likewise, "a2dissite" disables a site by removing those symlinks.)
answered Jan 5 at 19:27
E. YagmahanE. Yagmahan
465
add a comment |
In addition to the answers of thirteen3054:
After creating the new file index.conf you should enable it via:
sudo a2ensite index.conf
Doing that enables the specified site within the apache2 configuration. It does this by creating symlinks within /etc/apache2/sites-enabled. (Likewise, "a2dissite" disables a site by removing those symlinks.)
answered Jan 5 at 19:27
E. YagmahanE. Yagmahan
465
add a comment |
In addition to the answers of thirteen3054:
After creating the new file index.conf you should enable it via:
sudo a2ensite index.conf
Doing that enables the specified site within the apache2 configuration. It does this by creating symlinks within /etc/apache2/sites-enabled. (Likewise, "a2dissite" disables a site by removing those symlinks.)
answered Jan 5 at 19:27
E. YagmahanE. Yagmahan
465
In addition to the answers of thirteen3054:
After creating the new file index.conf you should enable it via:
sudo a2ensite index.conf
Doing that enables the specified site within the apache2 configuration. It does this by creating symlinks within /etc/apache2/sites-enabled. (Likewise, "a2dissite" disables a site by removing those symlinks.)
answered Jan 5 at 19:27
E. YagmahanE. Yagmahan
465
answered Jan 5 at 19:27
E. YagmahanE. Yagmahan
465
answered Jan 5 at 19:27
E. YagmahanE. Yagmahan
465
answered Jan 5 at 19:27
E. YagmahanE. Yagmahan
465
465
add a comment |
add a comment |
Place the file like this /var/www/html/index.html. Then go to /etc/apache2/sites-available, here create a file index.conf and add the following
<VirtualHost *:80>
ServerName test.com
ServerAdmin info@test.com
ServerAlias www.test.com
DocumentRoot /var/www/html
<Directory /var/www/html>
Require all granted
</Directory>
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
</VirtualHost>
As I did forgot and E. Yagmahan mentioned save your file and run this command:
sudo a2ensite index.conf
This command will enable your configuration file.
After all that run this:
sudo systemctl restart apache2
answered Jan 5 at 19:16
thirteen3054thirteen3054
64
Thanks, I will try this out. By the way, I was advise by a friend who does CS not to use the :80 port, and to use another one instead. Is he right, or is there any reason in not wanting to use the :80 port?
– Ruairí Másún
Jan 5 at 19:20
httpd.apache.org/docs/2.4/vhosts/examples.html read this. Port 80 is used for http making it a reserve port.
– thirteen3054
Jan 5 at 19:34
1
@RuairíMásún if you intendhttp://domain.tld/to go directrly to the site you need to use port 80. Your friend who does "CS" is not familiar with IT networking, but they're probably trying to shield you from typical HTTP based attack vectors and port scanners, but that's just security through obscurity and is useless in the long run. (FYI: I'm an IT Security professional so I'm speaking from some levels of experience here.)
– Thomas Ward♦
Jan 5 at 19:35
If you have a custom application that does not run asrootor doesn't get served directly by Apache, then yes you would use port 8000. But that's not the case when Apache itself is serving the files.
– Thomas Ward♦
Jan 5 at 19:36
I can't create a new file in the /etc/apache2/sites-available directory directly. Am I able to do this using Terminal? If so, how do I do it? I've opened the Terminal in that directory.
– Ruairí Másún
Jan 5 at 19:55
|
show 9 more comments
Place the file like this /var/www/html/index.html. Then go to /etc/apache2/sites-available, here create a file index.conf and add the following
<VirtualHost *:80>
ServerName test.com
ServerAdmin info@test.com
ServerAlias www.test.com
DocumentRoot /var/www/html
<Directory /var/www/html>
Require all granted
</Directory>
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
</VirtualHost>
As I did forgot and E. Yagmahan mentioned save your file and run this command:
sudo a2ensite index.conf
This command will enable your configuration file.
After all that run this:
sudo systemctl restart apache2
answered Jan 5 at 19:16
thirteen3054thirteen3054
64
Thanks, I will try this out. By the way, I was advise by a friend who does CS not to use the :80 port, and to use another one instead. Is he right, or is there any reason in not wanting to use the :80 port?
– Ruairí Másún
Jan 5 at 19:20
httpd.apache.org/docs/2.4/vhosts/examples.html read this. Port 80 is used for http making it a reserve port.
– thirteen3054
Jan 5 at 19:34
1
@RuairíMásún if you intendhttp://domain.tld/to go directrly to the site you need to use port 80. Your friend who does "CS" is not familiar with IT networking, but they're probably trying to shield you from typical HTTP based attack vectors and port scanners, but that's just security through obscurity and is useless in the long run. (FYI: I'm an IT Security professional so I'm speaking from some levels of experience here.)
– Thomas Ward♦
Jan 5 at 19:35
If you have a custom application that does not run asrootor doesn't get served directly by Apache, then yes you would use port 8000. But that's not the case when Apache itself is serving the files.
– Thomas Ward♦
Jan 5 at 19:36
I can't create a new file in the /etc/apache2/sites-available directory directly. Am I able to do this using Terminal? If so, how do I do it? I've opened the Terminal in that directory.
– Ruairí Másún
Jan 5 at 19:55
|
show 9 more comments
Place the file like this /var/www/html/index.html. Then go to /etc/apache2/sites-available, here create a file index.conf and add the following
<VirtualHost *:80>
ServerName test.com
ServerAdmin info@test.com
ServerAlias www.test.com
DocumentRoot /var/www/html
<Directory /var/www/html>
Require all granted
</Directory>
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
</VirtualHost>
As I did forgot and E. Yagmahan mentioned save your file and run this command:
sudo a2ensite index.conf
This command will enable your configuration file.
After all that run this:
sudo systemctl restart apache2
answered Jan 5 at 19:16
thirteen3054thirteen3054
64
Place the file like this /var/www/html/index.html. Then go to /etc/apache2/sites-available, here create a file index.conf and add the following
<VirtualHost *:80>
ServerName test.com
ServerAdmin info@test.com
ServerAlias www.test.com
DocumentRoot /var/www/html
<Directory /var/www/html>
Require all granted
</Directory>
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
</VirtualHost>
As I did forgot and E. Yagmahan mentioned save your file and run this command:
sudo a2ensite index.conf
This command will enable your configuration file.
After all that run this:
sudo systemctl restart apache2
answered Jan 5 at 19:16
thirteen3054thirteen3054
64
edited Jan 5 at 19:38
answered Jan 5 at 19:16
thirteen3054thirteen3054
64
answered Jan 5 at 19:16
thirteen3054thirteen3054
64
answered Jan 5 at 19:16
thirteen3054thirteen3054
64
64
Thanks, I will try this out. By the way, I was advise by a friend who does CS not to use the :80 port, and to use another one instead. Is he right, or is there any reason in not wanting to use the :80 port?
– Ruairí Másún
Jan 5 at 19:20
httpd.apache.org/docs/2.4/vhosts/examples.html read this. Port 80 is used for http making it a reserve port.
– thirteen3054
Jan 5 at 19:34
1
@RuairíMásún if you intendhttp://domain.tld/to go directrly to the site you need to use port 80. Your friend who does "CS" is not familiar with IT networking, but they're probably trying to shield you from typical HTTP based attack vectors and port scanners, but that's just security through obscurity and is useless in the long run. (FYI: I'm an IT Security professional so I'm speaking from some levels of experience here.)
– Thomas Ward♦
Jan 5 at 19:35
If you have a custom application that does not run asrootor doesn't get served directly by Apache, then yes you would use port 8000. But that's not the case when Apache itself is serving the files.
– Thomas Ward♦
Jan 5 at 19:36
I can't create a new file in the /etc/apache2/sites-available directory directly. Am I able to do this using Terminal? If so, how do I do it? I've opened the Terminal in that directory.
– Ruairí Másún
Jan 5 at 19:55
|
show 9 more comments
Thanks, I will try this out. By the way, I was advise by a friend who does CS not to use the :80 port, and to use another one instead. Is he right, or is there any reason in not wanting to use the :80 port?
– Ruairí Másún
Jan 5 at 19:20
httpd.apache.org/docs/2.4/vhosts/examples.html read this. Port 80 is used for http making it a reserve port.
– thirteen3054
Jan 5 at 19:34
1
@RuairíMásún if you intendhttp://domain.tld/to go directrly to the site you need to use port 80. Your friend who does "CS" is not familiar with IT networking, but they're probably trying to shield you from typical HTTP based attack vectors and port scanners, but that's just security through obscurity and is useless in the long run. (FYI: I'm an IT Security professional so I'm speaking from some levels of experience here.)
– Thomas Ward♦
Jan 5 at 19:35
If you have a custom application that does not run asrootor doesn't get served directly by Apache, then yes you would use port 8000. But that's not the case when Apache itself is serving the files.
– Thomas Ward♦
Jan 5 at 19:36
I can't create a new file in the /etc/apache2/sites-available directory directly. Am I able to do this using Terminal? If so, how do I do it? I've opened the Terminal in that directory.
– Ruairí Másún
Jan 5 at 19:55
Thanks, I will try this out. By the way, I was advise by a friend who does CS not to use the :80 port, and to use another one instead. Is he right, or is there any reason in not wanting to use the :80 port?
– Ruairí Másún
Jan 5 at 19:20
Thanks, I will try this out. By the way, I was advise by a friend who does CS not to use the :80 port, and to use another one instead. Is he right, or is there any reason in not wanting to use the :80 port?
– Ruairí Másún
Jan 5 at 19:20
httpd.apache.org/docs/2.4/vhosts/examples.html read this. Port 80 is used for http making it a reserve port.
– thirteen3054
Jan 5 at 19:34
httpd.apache.org/docs/2.4/vhosts/examples.html read this. Port 80 is used for http making it a reserve port.
– thirteen3054
Jan 5 at 19:34
1
1
@RuairíMásún if you intend
http://domain.tld/ to go directrly to the site you need to use port 80. Your friend who does "CS" is not familiar with IT networking, but they're probably trying to shield you from typical HTTP based attack vectors and port scanners, but that's just security through obscurity and is useless in the long run. (FYI: I'm an IT Security professional so I'm speaking from some levels of experience here.)– Thomas Ward♦
Jan 5 at 19:35
@RuairíMásún if you intend
http://domain.tld/ to go directrly to the site you need to use port 80. Your friend who does "CS" is not familiar with IT networking, but they're probably trying to shield you from typical HTTP based attack vectors and port scanners, but that's just security through obscurity and is useless in the long run. (FYI: I'm an IT Security professional so I'm speaking from some levels of experience here.)– Thomas Ward♦
Jan 5 at 19:35
If you have a custom application that does not run as
root or doesn't get served directly by Apache, then yes you would use port 8000. But that's not the case when Apache itself is serving the files.– Thomas Ward♦
Jan 5 at 19:36
If you have a custom application that does not run as
root or doesn't get served directly by Apache, then yes you would use port 8000. But that's not the case when Apache itself is serving the files.– Thomas Ward♦
Jan 5 at 19:36
I can't create a new file in the /etc/apache2/sites-available directory directly. Am I able to do this using Terminal? If so, how do I do it? I've opened the Terminal in that directory.
– Ruairí Másún
Jan 5 at 19:55
I can't create a new file in the /etc/apache2/sites-available directory directly. Am I able to do this using Terminal? If so, how do I do it? I've opened the Terminal in that directory.
– Ruairí Másún
Jan 5 at 19:55
|
show 9 more comments
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1107241%2fhow-to-make-a-html-file-on-apache-webserver-accessible-from-other-devices-and-lo%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
