What does strut mean?












3















What does strut mean?
Where I can apply the word?
Is it a strut?



I need to know what you call the things in the picture and what strut means. Are those struts in the picture?










share|improve this question




















  • 2





    What did a dictionary tell you? What about that definition leaves you confused?

    – Kat
    Feb 9 at 20:17











  • I was more curious about the legs, so didn't know what to google. Just had the word "strut" in my head (dunno why) so first thought that they might be struts. So googled 'struts' and found only some stuff, I guess, for car's engine.

    – Taras Kryvko
    Feb 9 at 21:53
















3















What does strut mean?
Where I can apply the word?
Is it a strut?



I need to know what you call the things in the picture and what strut means. Are those struts in the picture?










share|improve this question




















  • 2





    What did a dictionary tell you? What about that definition leaves you confused?

    – Kat
    Feb 9 at 20:17











  • I was more curious about the legs, so didn't know what to google. Just had the word "strut" in my head (dunno why) so first thought that they might be struts. So googled 'struts' and found only some stuff, I guess, for car's engine.

    – Taras Kryvko
    Feb 9 at 21:53














3












3








3








What does strut mean?
Where I can apply the word?
Is it a strut?



I need to know what you call the things in the picture and what strut means. Are those struts in the picture?










share|improve this question
















What does strut mean?
Where I can apply the word?
Is it a strut?



I need to know what you call the things in the picture and what strut means. Are those struts in the picture?







word-usage word-choice






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited Feb 8 at 21:17









Boann

48926




48926










asked Feb 8 at 18:25









Taras KryvkoTaras Kryvko

340110




340110








  • 2





    What did a dictionary tell you? What about that definition leaves you confused?

    – Kat
    Feb 9 at 20:17











  • I was more curious about the legs, so didn't know what to google. Just had the word "strut" in my head (dunno why) so first thought that they might be struts. So googled 'struts' and found only some stuff, I guess, for car's engine.

    – Taras Kryvko
    Feb 9 at 21:53














  • 2





    What did a dictionary tell you? What about that definition leaves you confused?

    – Kat
    Feb 9 at 20:17











  • I was more curious about the legs, so didn't know what to google. Just had the word "strut" in my head (dunno why) so first thought that they might be struts. So googled 'struts' and found only some stuff, I guess, for car's engine.

    – Taras Kryvko
    Feb 9 at 21:53








2




2





What did a dictionary tell you? What about that definition leaves you confused?

– Kat
Feb 9 at 20:17





What did a dictionary tell you? What about that definition leaves you confused?

– Kat
Feb 9 at 20:17













I was more curious about the legs, so didn't know what to google. Just had the word "strut" in my head (dunno why) so first thought that they might be struts. So googled 'struts' and found only some stuff, I guess, for car's engine.

– Taras Kryvko
Feb 9 at 21:53





I was more curious about the legs, so didn't know what to google. Just had the word "strut" in my head (dunno why) so first thought that they might be struts. So googled 'struts' and found only some stuff, I guess, for car's engine.

– Taras Kryvko
Feb 9 at 21:53










5 Answers
5






active

oldest

votes


















17














I might call these the legs of the board or whatever the object is called. The stand would be the entire standing apparatus, perhaps, but certainly "the legs" is the best way.






share|improve this answer































    16














    I think the strut is actually the horizontal metal strip between the two sides of the board. It keeps the two sides from pressing back together.



    A strut is a structural piece designed to resist pressure in the direction of its length.





    It seems there is some debate if the piece I refer to is 100% technically a strut--I have always heard it referred to that way, and believe that in colloquial usage it would be an appropriate word. But it seems if you're writing for a technical description, it may not be appropriate.






    share|improve this answer





















    • 3





      I've edited my response. But the question did ask about struts: it said "what does strut mean, where can I apply the word and is it a strut in the picture"

      – Katy
      Feb 8 at 19:40





















    6














    The picture shows a board in a frame and this is attached to an A-frame structure.



    A-frame structures for this usage (holding up a board) have legs.



    struts are not relevant here. Struts are cross-beams, therefore, usually horizontal, used in the construction industry to strengthen vertical loads and also on guitar necks to so different notes can be played. On guitars, struts are vertical.



    Struts can also be found in certain pieces of furniture where they reinforce some structure. For examples, some beds have a frame made of wood with cross pieces called struts where a mattress is placed.






    share|improve this answer





















    • 5





      Struts don't have to be horizontal. They are rods (or similarly shaped things) designed to resist compression. For example, a modern car's suspension often has mostly vertical struts in its design. I guess you could call that board's legs and crossbars "struts", but most people would call them "legs" or "crossbars"

      – Flydog57
      Feb 8 at 19:29








    • 1





      +1 for "Struts don't have to be horizontal".

      – Michael Harvey
      Feb 8 at 20:07






    • 1





      Guitar bracing refers to the system of wooden struts which internally support and reinforce the soundboard and back of acoustic guitars. Wikipedia I did mix up struts and frets. Sorry.

      – Lambie
      Feb 8 at 22:29






    • 3





      @Lambie Struts in mechanical engineering are not defined by to whether they are horizontal or vertical, but by the type of loads transmitted through them. Your attempt to define them and say what they are used for is completely wrong. The parts that support the mattress on a bed are not struts at all so far as an engineer is concerned, but beams which resist bending caused by the weight of the mattress and the occupants of the bed, not tension or compression.

      – alephzero
      Feb 9 at 13:38






    • 5





      I’ve always called those cross pieces under a mattress slats, not struts.

      – J.R.
      Feb 9 at 13:56



















    6














    The engineering definition of a "strut" is simply a component which has a compressive force acting along its length.



    That definition certainly applies to the parts of your frame marked with the arrows. In contrast, it does NOT apply to the horizontal links between the two boards, which are in tension not compression. An engineer would call those parts "ties".



    However, non-engineers would describe the arrowed parts as "legs," not "struts," just like the "legs" of a chair or a table.






    share|improve this answer



















    • 2





      I think your last point may be the most relevant for the learner, and I’d like to add to it: the word strut is not used very often when referring to parts of everyday items such as folding signs, folding chairs, or easels. Instead, we’re more likely to hear terms such as legs, hinge, or latch. Maybe an engineer can’t find a strut in the picture, but I also agree with Katy’s point: colloquially, many non-engineers might call something a strut even when it isn’t technically a strut – but that goes back to how the word isn’t common and most people don’t know much about what struts do.

      – J.R.
      Feb 9 at 14:00





















    1














    In common non-engineering American English, the main familiar usage for this meaning of strut is as part of the suspension in cars, since they need service/replacement from time to time. Keep in mind strut, as a noun or verb, can also be used for a particular way of walking, and this meaning is probably more familiar.






    share|improve this answer
























      Your Answer








      StackExchange.ready(function() {
      var channelOptions = {
      tags: "".split(" "),
      id: "481"
      };
      initTagRenderer("".split(" "), "".split(" "), channelOptions);

      StackExchange.using("externalEditor", function() {
      // Have to fire editor after snippets, if snippets enabled
      if (StackExchange.settings.snippets.snippetsEnabled) {
      StackExchange.using("snippets", function() {
      createEditor();
      });
      }
      else {
      createEditor();
      }
      });

      function createEditor() {
      StackExchange.prepareEditor({
      heartbeatType: 'answer',
      autoActivateHeartbeat: false,
      convertImagesToLinks: false,
      noModals: true,
      showLowRepImageUploadWarning: true,
      reputationToPostImages: null,
      bindNavPrevention: true,
      postfix: "",
      imageUploader: {
      brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
      contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
      allowUrls: true
      },
      noCode: true, onDemand: true,
      discardSelector: ".discard-answer"
      ,immediatelyShowMarkdownHelp:true
      });


      }
      });














      draft saved

      draft discarded


















      StackExchange.ready(
      function () {
      StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fell.stackexchange.com%2fquestions%2f195896%2fwhat-does-strut-mean%23new-answer', 'question_page');
      }
      );

      Post as a guest















      Required, but never shown

























      5 Answers
      5






      active

      oldest

      votes








      5 Answers
      5






      active

      oldest

      votes









      active

      oldest

      votes






      active

      oldest

      votes









      17














      I might call these the legs of the board or whatever the object is called. The stand would be the entire standing apparatus, perhaps, but certainly "the legs" is the best way.






      share|improve this answer




























        17














        I might call these the legs of the board or whatever the object is called. The stand would be the entire standing apparatus, perhaps, but certainly "the legs" is the best way.






        share|improve this answer


























          17












          17








          17







          I might call these the legs of the board or whatever the object is called. The stand would be the entire standing apparatus, perhaps, but certainly "the legs" is the best way.






          share|improve this answer













          I might call these the legs of the board or whatever the object is called. The stand would be the entire standing apparatus, perhaps, but certainly "the legs" is the best way.







          share|improve this answer












          share|improve this answer



          share|improve this answer










          answered Feb 8 at 18:30









          user45266user45266

          1,305116




          1,305116

























              16














              I think the strut is actually the horizontal metal strip between the two sides of the board. It keeps the two sides from pressing back together.



              A strut is a structural piece designed to resist pressure in the direction of its length.





              It seems there is some debate if the piece I refer to is 100% technically a strut--I have always heard it referred to that way, and believe that in colloquial usage it would be an appropriate word. But it seems if you're writing for a technical description, it may not be appropriate.






              share|improve this answer





















              • 3





                I've edited my response. But the question did ask about struts: it said "what does strut mean, where can I apply the word and is it a strut in the picture"

                – Katy
                Feb 8 at 19:40


















              16














              I think the strut is actually the horizontal metal strip between the two sides of the board. It keeps the two sides from pressing back together.



              A strut is a structural piece designed to resist pressure in the direction of its length.





              It seems there is some debate if the piece I refer to is 100% technically a strut--I have always heard it referred to that way, and believe that in colloquial usage it would be an appropriate word. But it seems if you're writing for a technical description, it may not be appropriate.






              share|improve this answer





















              • 3





                I've edited my response. But the question did ask about struts: it said "what does strut mean, where can I apply the word and is it a strut in the picture"

                – Katy
                Feb 8 at 19:40
















              16












              16








              16







              I think the strut is actually the horizontal metal strip between the two sides of the board. It keeps the two sides from pressing back together.



              A strut is a structural piece designed to resist pressure in the direction of its length.





              It seems there is some debate if the piece I refer to is 100% technically a strut--I have always heard it referred to that way, and believe that in colloquial usage it would be an appropriate word. But it seems if you're writing for a technical description, it may not be appropriate.






              share|improve this answer















              I think the strut is actually the horizontal metal strip between the two sides of the board. It keeps the two sides from pressing back together.



              A strut is a structural piece designed to resist pressure in the direction of its length.





              It seems there is some debate if the piece I refer to is 100% technically a strut--I have always heard it referred to that way, and believe that in colloquial usage it would be an appropriate word. But it seems if you're writing for a technical description, it may not be appropriate.







              share|improve this answer














              share|improve this answer



              share|improve this answer








              edited Feb 9 at 23:35









              V2Blast

              14518




              14518










              answered Feb 8 at 18:36









              KatyKaty

              2,032415




              2,032415








              • 3





                I've edited my response. But the question did ask about struts: it said "what does strut mean, where can I apply the word and is it a strut in the picture"

                – Katy
                Feb 8 at 19:40
















              • 3





                I've edited my response. But the question did ask about struts: it said "what does strut mean, where can I apply the word and is it a strut in the picture"

                – Katy
                Feb 8 at 19:40










              3




              3





              I've edited my response. But the question did ask about struts: it said "what does strut mean, where can I apply the word and is it a strut in the picture"

              – Katy
              Feb 8 at 19:40







              I've edited my response. But the question did ask about struts: it said "what does strut mean, where can I apply the word and is it a strut in the picture"

              – Katy
              Feb 8 at 19:40













              6














              The picture shows a board in a frame and this is attached to an A-frame structure.



              A-frame structures for this usage (holding up a board) have legs.



              struts are not relevant here. Struts are cross-beams, therefore, usually horizontal, used in the construction industry to strengthen vertical loads and also on guitar necks to so different notes can be played. On guitars, struts are vertical.



              Struts can also be found in certain pieces of furniture where they reinforce some structure. For examples, some beds have a frame made of wood with cross pieces called struts where a mattress is placed.






              share|improve this answer





















              • 5





                Struts don't have to be horizontal. They are rods (or similarly shaped things) designed to resist compression. For example, a modern car's suspension often has mostly vertical struts in its design. I guess you could call that board's legs and crossbars "struts", but most people would call them "legs" or "crossbars"

                – Flydog57
                Feb 8 at 19:29








              • 1





                +1 for "Struts don't have to be horizontal".

                – Michael Harvey
                Feb 8 at 20:07






              • 1





                Guitar bracing refers to the system of wooden struts which internally support and reinforce the soundboard and back of acoustic guitars. Wikipedia I did mix up struts and frets. Sorry.

                – Lambie
                Feb 8 at 22:29






              • 3





                @Lambie Struts in mechanical engineering are not defined by to whether they are horizontal or vertical, but by the type of loads transmitted through them. Your attempt to define them and say what they are used for is completely wrong. The parts that support the mattress on a bed are not struts at all so far as an engineer is concerned, but beams which resist bending caused by the weight of the mattress and the occupants of the bed, not tension or compression.

                – alephzero
                Feb 9 at 13:38






              • 5





                I’ve always called those cross pieces under a mattress slats, not struts.

                – J.R.
                Feb 9 at 13:56
















              6














              The picture shows a board in a frame and this is attached to an A-frame structure.



              A-frame structures for this usage (holding up a board) have legs.



              struts are not relevant here. Struts are cross-beams, therefore, usually horizontal, used in the construction industry to strengthen vertical loads and also on guitar necks to so different notes can be played. On guitars, struts are vertical.



              Struts can also be found in certain pieces of furniture where they reinforce some structure. For examples, some beds have a frame made of wood with cross pieces called struts where a mattress is placed.






              share|improve this answer





















              • 5





                Struts don't have to be horizontal. They are rods (or similarly shaped things) designed to resist compression. For example, a modern car's suspension often has mostly vertical struts in its design. I guess you could call that board's legs and crossbars "struts", but most people would call them "legs" or "crossbars"

                – Flydog57
                Feb 8 at 19:29








              • 1





                +1 for "Struts don't have to be horizontal".

                – Michael Harvey
                Feb 8 at 20:07






              • 1





                Guitar bracing refers to the system of wooden struts which internally support and reinforce the soundboard and back of acoustic guitars. Wikipedia I did mix up struts and frets. Sorry.

                – Lambie
                Feb 8 at 22:29






              • 3





                @Lambie Struts in mechanical engineering are not defined by to whether they are horizontal or vertical, but by the type of loads transmitted through them. Your attempt to define them and say what they are used for is completely wrong. The parts that support the mattress on a bed are not struts at all so far as an engineer is concerned, but beams which resist bending caused by the weight of the mattress and the occupants of the bed, not tension or compression.

                – alephzero
                Feb 9 at 13:38






              • 5





                I’ve always called those cross pieces under a mattress slats, not struts.

                – J.R.
                Feb 9 at 13:56














              6












              6








              6







              The picture shows a board in a frame and this is attached to an A-frame structure.



              A-frame structures for this usage (holding up a board) have legs.



              struts are not relevant here. Struts are cross-beams, therefore, usually horizontal, used in the construction industry to strengthen vertical loads and also on guitar necks to so different notes can be played. On guitars, struts are vertical.



              Struts can also be found in certain pieces of furniture where they reinforce some structure. For examples, some beds have a frame made of wood with cross pieces called struts where a mattress is placed.






              share|improve this answer















              The picture shows a board in a frame and this is attached to an A-frame structure.



              A-frame structures for this usage (holding up a board) have legs.



              struts are not relevant here. Struts are cross-beams, therefore, usually horizontal, used in the construction industry to strengthen vertical loads and also on guitar necks to so different notes can be played. On guitars, struts are vertical.



              Struts can also be found in certain pieces of furniture where they reinforce some structure. For examples, some beds have a frame made of wood with cross pieces called struts where a mattress is placed.







              share|improve this answer














              share|improve this answer



              share|improve this answer








              edited Feb 8 at 19:03

























              answered Feb 8 at 18:58









              LambieLambie

              17.1k1539




              17.1k1539








              • 5





                Struts don't have to be horizontal. They are rods (or similarly shaped things) designed to resist compression. For example, a modern car's suspension often has mostly vertical struts in its design. I guess you could call that board's legs and crossbars "struts", but most people would call them "legs" or "crossbars"

                – Flydog57
                Feb 8 at 19:29








              • 1





                +1 for "Struts don't have to be horizontal".

                – Michael Harvey
                Feb 8 at 20:07






              • 1





                Guitar bracing refers to the system of wooden struts which internally support and reinforce the soundboard and back of acoustic guitars. Wikipedia I did mix up struts and frets. Sorry.

                – Lambie
                Feb 8 at 22:29






              • 3





                @Lambie Struts in mechanical engineering are not defined by to whether they are horizontal or vertical, but by the type of loads transmitted through them. Your attempt to define them and say what they are used for is completely wrong. The parts that support the mattress on a bed are not struts at all so far as an engineer is concerned, but beams which resist bending caused by the weight of the mattress and the occupants of the bed, not tension or compression.

                – alephzero
                Feb 9 at 13:38






              • 5





                I’ve always called those cross pieces under a mattress slats, not struts.

                – J.R.
                Feb 9 at 13:56














              • 5





                Struts don't have to be horizontal. They are rods (or similarly shaped things) designed to resist compression. For example, a modern car's suspension often has mostly vertical struts in its design. I guess you could call that board's legs and crossbars "struts", but most people would call them "legs" or "crossbars"

                – Flydog57
                Feb 8 at 19:29








              • 1





                +1 for "Struts don't have to be horizontal".

                – Michael Harvey
                Feb 8 at 20:07






              • 1





                Guitar bracing refers to the system of wooden struts which internally support and reinforce the soundboard and back of acoustic guitars. Wikipedia I did mix up struts and frets. Sorry.

                – Lambie
                Feb 8 at 22:29






              • 3





                @Lambie Struts in mechanical engineering are not defined by to whether they are horizontal or vertical, but by the type of loads transmitted through them. Your attempt to define them and say what they are used for is completely wrong. The parts that support the mattress on a bed are not struts at all so far as an engineer is concerned, but beams which resist bending caused by the weight of the mattress and the occupants of the bed, not tension or compression.

                – alephzero
                Feb 9 at 13:38






              • 5





                I’ve always called those cross pieces under a mattress slats, not struts.

                – J.R.
                Feb 9 at 13:56








              5




              5





              Struts don't have to be horizontal. They are rods (or similarly shaped things) designed to resist compression. For example, a modern car's suspension often has mostly vertical struts in its design. I guess you could call that board's legs and crossbars "struts", but most people would call them "legs" or "crossbars"

              – Flydog57
              Feb 8 at 19:29







              Struts don't have to be horizontal. They are rods (or similarly shaped things) designed to resist compression. For example, a modern car's suspension often has mostly vertical struts in its design. I guess you could call that board's legs and crossbars "struts", but most people would call them "legs" or "crossbars"

              – Flydog57
              Feb 8 at 19:29






              1




              1





              +1 for "Struts don't have to be horizontal".

              – Michael Harvey
              Feb 8 at 20:07





              +1 for "Struts don't have to be horizontal".

              – Michael Harvey
              Feb 8 at 20:07




              1




              1





              Guitar bracing refers to the system of wooden struts which internally support and reinforce the soundboard and back of acoustic guitars. Wikipedia I did mix up struts and frets. Sorry.

              – Lambie
              Feb 8 at 22:29





              Guitar bracing refers to the system of wooden struts which internally support and reinforce the soundboard and back of acoustic guitars. Wikipedia I did mix up struts and frets. Sorry.

              – Lambie
              Feb 8 at 22:29




              3




              3





              @Lambie Struts in mechanical engineering are not defined by to whether they are horizontal or vertical, but by the type of loads transmitted through them. Your attempt to define them and say what they are used for is completely wrong. The parts that support the mattress on a bed are not struts at all so far as an engineer is concerned, but beams which resist bending caused by the weight of the mattress and the occupants of the bed, not tension or compression.

              – alephzero
              Feb 9 at 13:38





              @Lambie Struts in mechanical engineering are not defined by to whether they are horizontal or vertical, but by the type of loads transmitted through them. Your attempt to define them and say what they are used for is completely wrong. The parts that support the mattress on a bed are not struts at all so far as an engineer is concerned, but beams which resist bending caused by the weight of the mattress and the occupants of the bed, not tension or compression.

              – alephzero
              Feb 9 at 13:38




              5




              5





              I’ve always called those cross pieces under a mattress slats, not struts.

              – J.R.
              Feb 9 at 13:56





              I’ve always called those cross pieces under a mattress slats, not struts.

              – J.R.
              Feb 9 at 13:56











              6














              The engineering definition of a "strut" is simply a component which has a compressive force acting along its length.



              That definition certainly applies to the parts of your frame marked with the arrows. In contrast, it does NOT apply to the horizontal links between the two boards, which are in tension not compression. An engineer would call those parts "ties".



              However, non-engineers would describe the arrowed parts as "legs," not "struts," just like the "legs" of a chair or a table.






              share|improve this answer



















              • 2





                I think your last point may be the most relevant for the learner, and I’d like to add to it: the word strut is not used very often when referring to parts of everyday items such as folding signs, folding chairs, or easels. Instead, we’re more likely to hear terms such as legs, hinge, or latch. Maybe an engineer can’t find a strut in the picture, but I also agree with Katy’s point: colloquially, many non-engineers might call something a strut even when it isn’t technically a strut – but that goes back to how the word isn’t common and most people don’t know much about what struts do.

                – J.R.
                Feb 9 at 14:00


















              6














              The engineering definition of a "strut" is simply a component which has a compressive force acting along its length.



              That definition certainly applies to the parts of your frame marked with the arrows. In contrast, it does NOT apply to the horizontal links between the two boards, which are in tension not compression. An engineer would call those parts "ties".



              However, non-engineers would describe the arrowed parts as "legs," not "struts," just like the "legs" of a chair or a table.






              share|improve this answer



















              • 2





                I think your last point may be the most relevant for the learner, and I’d like to add to it: the word strut is not used very often when referring to parts of everyday items such as folding signs, folding chairs, or easels. Instead, we’re more likely to hear terms such as legs, hinge, or latch. Maybe an engineer can’t find a strut in the picture, but I also agree with Katy’s point: colloquially, many non-engineers might call something a strut even when it isn’t technically a strut – but that goes back to how the word isn’t common and most people don’t know much about what struts do.

                – J.R.
                Feb 9 at 14:00
















              6












              6








              6







              The engineering definition of a "strut" is simply a component which has a compressive force acting along its length.



              That definition certainly applies to the parts of your frame marked with the arrows. In contrast, it does NOT apply to the horizontal links between the two boards, which are in tension not compression. An engineer would call those parts "ties".



              However, non-engineers would describe the arrowed parts as "legs," not "struts," just like the "legs" of a chair or a table.






              share|improve this answer













              The engineering definition of a "strut" is simply a component which has a compressive force acting along its length.



              That definition certainly applies to the parts of your frame marked with the arrows. In contrast, it does NOT apply to the horizontal links between the two boards, which are in tension not compression. An engineer would call those parts "ties".



              However, non-engineers would describe the arrowed parts as "legs," not "struts," just like the "legs" of a chair or a table.







              share|improve this answer












              share|improve this answer



              share|improve this answer










              answered Feb 9 at 13:34









              alephzeroalephzero

              2,371414




              2,371414








              • 2





                I think your last point may be the most relevant for the learner, and I’d like to add to it: the word strut is not used very often when referring to parts of everyday items such as folding signs, folding chairs, or easels. Instead, we’re more likely to hear terms such as legs, hinge, or latch. Maybe an engineer can’t find a strut in the picture, but I also agree with Katy’s point: colloquially, many non-engineers might call something a strut even when it isn’t technically a strut – but that goes back to how the word isn’t common and most people don’t know much about what struts do.

                – J.R.
                Feb 9 at 14:00
















              • 2





                I think your last point may be the most relevant for the learner, and I’d like to add to it: the word strut is not used very often when referring to parts of everyday items such as folding signs, folding chairs, or easels. Instead, we’re more likely to hear terms such as legs, hinge, or latch. Maybe an engineer can’t find a strut in the picture, but I also agree with Katy’s point: colloquially, many non-engineers might call something a strut even when it isn’t technically a strut – but that goes back to how the word isn’t common and most people don’t know much about what struts do.

                – J.R.
                Feb 9 at 14:00










              2




              2





              I think your last point may be the most relevant for the learner, and I’d like to add to it: the word strut is not used very often when referring to parts of everyday items such as folding signs, folding chairs, or easels. Instead, we’re more likely to hear terms such as legs, hinge, or latch. Maybe an engineer can’t find a strut in the picture, but I also agree with Katy’s point: colloquially, many non-engineers might call something a strut even when it isn’t technically a strut – but that goes back to how the word isn’t common and most people don’t know much about what struts do.

              – J.R.
              Feb 9 at 14:00







              I think your last point may be the most relevant for the learner, and I’d like to add to it: the word strut is not used very often when referring to parts of everyday items such as folding signs, folding chairs, or easels. Instead, we’re more likely to hear terms such as legs, hinge, or latch. Maybe an engineer can’t find a strut in the picture, but I also agree with Katy’s point: colloquially, many non-engineers might call something a strut even when it isn’t technically a strut – but that goes back to how the word isn’t common and most people don’t know much about what struts do.

              – J.R.
              Feb 9 at 14:00













              1














              In common non-engineering American English, the main familiar usage for this meaning of strut is as part of the suspension in cars, since they need service/replacement from time to time. Keep in mind strut, as a noun or verb, can also be used for a particular way of walking, and this meaning is probably more familiar.






              share|improve this answer




























                1














                In common non-engineering American English, the main familiar usage for this meaning of strut is as part of the suspension in cars, since they need service/replacement from time to time. Keep in mind strut, as a noun or verb, can also be used for a particular way of walking, and this meaning is probably more familiar.






                share|improve this answer


























                  1












                  1








                  1







                  In common non-engineering American English, the main familiar usage for this meaning of strut is as part of the suspension in cars, since they need service/replacement from time to time. Keep in mind strut, as a noun or verb, can also be used for a particular way of walking, and this meaning is probably more familiar.






                  share|improve this answer













                  In common non-engineering American English, the main familiar usage for this meaning of strut is as part of the suspension in cars, since they need service/replacement from time to time. Keep in mind strut, as a noun or verb, can also be used for a particular way of walking, and this meaning is probably more familiar.







                  share|improve this answer












                  share|improve this answer



                  share|improve this answer










                  answered Feb 10 at 4:23









                  R..R..

                  31815




                  31815






























                      draft saved

                      draft discarded




















































                      Thanks for contributing an answer to English Language Learners Stack Exchange!


                      • Please be sure to answer the question. Provide details and share your research!

                      But avoid



                      • Asking for help, clarification, or responding to other answers.

                      • Making statements based on opinion; back them up with references or personal experience.


                      To learn more, see our tips on writing great answers.




                      draft saved


                      draft discarded














                      StackExchange.ready(
                      function () {
                      StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fell.stackexchange.com%2fquestions%2f195896%2fwhat-does-strut-mean%23new-answer', 'question_page');
                      }
                      );

                      Post as a guest















                      Required, but never shown





















































                      Required, but never shown














                      Required, but never shown












                      Required, but never shown







                      Required, but never shown

































                      Required, but never shown














                      Required, but never shown












                      Required, but never shown







                      Required, but never shown







                      Popular posts from this blog

                      Human spaceflight

                      Can not write log (Is /dev/pts mounted?) - openpty in Ubuntu-on-Windows?

                      張江高科駅