GTX 1060 installation on GA-AX370 motherboard on Ubuntu 18.04 [closed]
I have Ryzen 3 2200G with integrated graphics and when I connect the HDMI to the motherboard and change settings to integrated graphics in BIOS it boots correctly, but when I connect HDMI to the graphic card (ZOTAC GeForce GTX 1060) it asks for an encryption password, blinks for a while, and stops at the following screen.
How do I solve it? I don't think there should be a problem with my partitions because it wouldn't boot in Integrated Graphics use case and I tried flipping the switch use_lvmetad from 1 to 0, but still this shows up. Please point me in the direction where I should think?
Also I have installed the Nvidia drivers. My kernel version is 4.15.0-43 and Nvidia drivers installed are at version 410.
Dual BIOS and secure boot do not seem to be the problems.
18.04 nvidia-geforce gpu-drivers
edited Jan 8 at 16:26
karel
58.2k12128146
asked Jan 7 at 17:57
caissalovercaissalover
165
closed as off-topic by karel, Charles Green, Eric Carvalho, Thomas, Tom Brossman Jan 13 at 19:52
This question appears to be off-topic. The users who voted to close gave this specific reason:
- "This describes a problem that can't be reproduced, that seemingly went away on its own or was only relevant to a very specific period of time. It's off-topic as it's unlikely to help future readers." – karel, Charles Green, Eric Carvalho, Thomas, Tom Brossman
If this question can be reworded to fit the rules in the help center, please edit the question.
add a comment |
I have Ryzen 3 2200G with integrated graphics and when I connect the HDMI to the motherboard and change settings to integrated graphics in BIOS it boots correctly, but when I connect HDMI to the graphic card (ZOTAC GeForce GTX 1060) it asks for an encryption password, blinks for a while, and stops at the following screen.
How do I solve it? I don't think there should be a problem with my partitions because it wouldn't boot in Integrated Graphics use case and I tried flipping the switch use_lvmetad from 1 to 0, but still this shows up. Please point me in the direction where I should think?
Also I have installed the Nvidia drivers. My kernel version is 4.15.0-43 and Nvidia drivers installed are at version 410.
Dual BIOS and secure boot do not seem to be the problems.
18.04 nvidia-geforce gpu-drivers
edited Jan 8 at 16:26
karel
58.2k12128146
asked Jan 7 at 17:57
caissalovercaissalover
165
closed as off-topic by karel, Charles Green, Eric Carvalho, Thomas, Tom Brossman Jan 13 at 19:52
This question appears to be off-topic. The users who voted to close gave this specific reason:
- "This describes a problem that can't be reproduced, that seemingly went away on its own or was only relevant to a very specific period of time. It's off-topic as it's unlikely to help future readers." – karel, Charles Green, Eric Carvalho, Thomas, Tom Brossman
If this question can be reworded to fit the rules in the help center, please edit the question.
1
Have you disabled Secure Boot in BIOS?
– Terrance
Jan 7 at 18:11
1
@Terrance There's no explicit secure boot option but these are the settings CSM Support : Enabled Other PCI Device ROM Priority : UEFI Only Storage Boot Option Control : Legacy Only I'm having a feeling of flipping PCI to Legacy?!
– caissalover
Jan 7 at 18:38
Nope, doesn't work with flipping the PCI Switch to Legacy, facing the same problem
– caissalover
Jan 7 at 18:41
That's right, these are Dual BIOS boards. Same thing I got for my sons computers. My bad! I think there is a BIOS setting to set the PCI to primary video instead of the on-board one.
– Terrance
Jan 7 at 18:48
caissalover, comments will soon scroll off the screen, Instead of replying with a Comment, please instead click edit and enhance your original question with the new info, then click on (x) at the end of each comment and delete the Comments once their data's in your Question.
– K7AAY
Jan 7 at 21:48
add a comment |
I have Ryzen 3 2200G with integrated graphics and when I connect the HDMI to the motherboard and change settings to integrated graphics in BIOS it boots correctly, but when I connect HDMI to the graphic card (ZOTAC GeForce GTX 1060) it asks for an encryption password, blinks for a while, and stops at the following screen.
How do I solve it? I don't think there should be a problem with my partitions because it wouldn't boot in Integrated Graphics use case and I tried flipping the switch use_lvmetad from 1 to 0, but still this shows up. Please point me in the direction where I should think?
Also I have installed the Nvidia drivers. My kernel version is 4.15.0-43 and Nvidia drivers installed are at version 410.
Dual BIOS and secure boot do not seem to be the problems.
18.04 nvidia-geforce gpu-drivers
edited Jan 8 at 16:26
karel
58.2k12128146
asked Jan 7 at 17:57
caissalovercaissalover
165
I have Ryzen 3 2200G with integrated graphics and when I connect the HDMI to the motherboard and change settings to integrated graphics in BIOS it boots correctly, but when I connect HDMI to the graphic card (ZOTAC GeForce GTX 1060) it asks for an encryption password, blinks for a while, and stops at the following screen.
How do I solve it? I don't think there should be a problem with my partitions because it wouldn't boot in Integrated Graphics use case and I tried flipping the switch use_lvmetad from 1 to 0, but still this shows up. Please point me in the direction where I should think?
Also I have installed the Nvidia drivers. My kernel version is 4.15.0-43 and Nvidia drivers installed are at version 410.
Dual BIOS and secure boot do not seem to be the problems.
18.04 nvidia-geforce gpu-drivers
18.04 nvidia-geforce gpu-drivers
edited Jan 8 at 16:26
karel
58.2k12128146
asked Jan 7 at 17:57
caissalovercaissalover
165
edited Jan 8 at 16:26
karel
58.2k12128146
asked Jan 7 at 17:57
caissalovercaissalover
165
edited Jan 8 at 16:26
karel
58.2k12128146
edited Jan 8 at 16:26
karel
58.2k12128146
edited Jan 8 at 16:26
karel
58.2k12128146
58.2k12128146
asked Jan 7 at 17:57
caissalovercaissalover
165
asked Jan 7 at 17:57
caissalovercaissalover
165
asked Jan 7 at 17:57
caissalovercaissalover
165
165
closed as off-topic by karel, Charles Green, Eric Carvalho, Thomas, Tom Brossman Jan 13 at 19:52
This question appears to be off-topic. The users who voted to close gave this specific reason:
- "This describes a problem that can't be reproduced, that seemingly went away on its own or was only relevant to a very specific period of time. It's off-topic as it's unlikely to help future readers." – karel, Charles Green, Eric Carvalho, Thomas, Tom Brossman
If this question can be reworded to fit the rules in the help center, please edit the question.
closed as off-topic by karel, Charles Green, Eric Carvalho, Thomas, Tom Brossman Jan 13 at 19:52
This question appears to be off-topic. The users who voted to close gave this specific reason:
- "This describes a problem that can't be reproduced, that seemingly went away on its own or was only relevant to a very specific period of time. It's off-topic as it's unlikely to help future readers." – karel, Charles Green, Eric Carvalho, Thomas, Tom Brossman
If this question can be reworded to fit the rules in the help center, please edit the question.
1
Have you disabled Secure Boot in BIOS?
– Terrance
Jan 7 at 18:11
1
@Terrance There's no explicit secure boot option but these are the settings CSM Support : Enabled Other PCI Device ROM Priority : UEFI Only Storage Boot Option Control : Legacy Only I'm having a feeling of flipping PCI to Legacy?!
– caissalover
Jan 7 at 18:38
Nope, doesn't work with flipping the PCI Switch to Legacy, facing the same problem
– caissalover
Jan 7 at 18:41
That's right, these are Dual BIOS boards. Same thing I got for my sons computers. My bad! I think there is a BIOS setting to set the PCI to primary video instead of the on-board one.
– Terrance
Jan 7 at 18:48
caissalover, comments will soon scroll off the screen, Instead of replying with a Comment, please instead click edit and enhance your original question with the new info, then click on (x) at the end of each comment and delete the Comments once their data's in your Question.
– K7AAY
Jan 7 at 21:48
add a comment |
1
Have you disabled Secure Boot in BIOS?
– Terrance
Jan 7 at 18:11
1
@Terrance There's no explicit secure boot option but these are the settings CSM Support : Enabled Other PCI Device ROM Priority : UEFI Only Storage Boot Option Control : Legacy Only I'm having a feeling of flipping PCI to Legacy?!
– caissalover
Jan 7 at 18:38
Nope, doesn't work with flipping the PCI Switch to Legacy, facing the same problem
– caissalover
Jan 7 at 18:41
That's right, these are Dual BIOS boards. Same thing I got for my sons computers. My bad! I think there is a BIOS setting to set the PCI to primary video instead of the on-board one.
– Terrance
Jan 7 at 18:48
caissalover, comments will soon scroll off the screen, Instead of replying with a Comment, please instead click edit and enhance your original question with the new info, then click on (x) at the end of each comment and delete the Comments once their data's in your Question.
– K7AAY
Jan 7 at 21:48
1
1
Have you disabled Secure Boot in BIOS?
– Terrance
Jan 7 at 18:11
Have you disabled Secure Boot in BIOS?
– Terrance
Jan 7 at 18:11
1
1
@Terrance There's no explicit secure boot option but these are the settings CSM Support : Enabled Other PCI Device ROM Priority : UEFI Only Storage Boot Option Control : Legacy Only I'm having a feeling of flipping PCI to Legacy?!
– caissalover
Jan 7 at 18:38
@Terrance There's no explicit secure boot option but these are the settings CSM Support : Enabled Other PCI Device ROM Priority : UEFI Only Storage Boot Option Control : Legacy Only I'm having a feeling of flipping PCI to Legacy?!
– caissalover
Jan 7 at 18:38
Nope, doesn't work with flipping the PCI Switch to Legacy, facing the same problem
– caissalover
Jan 7 at 18:41
Nope, doesn't work with flipping the PCI Switch to Legacy, facing the same problem
– caissalover
Jan 7 at 18:41
That's right, these are Dual BIOS boards. Same thing I got for my sons computers. My bad! I think there is a BIOS setting to set the PCI to primary video instead of the on-board one.
– Terrance
Jan 7 at 18:48
That's right, these are Dual BIOS boards. Same thing I got for my sons computers. My bad! I think there is a BIOS setting to set the PCI to primary video instead of the on-board one.
– Terrance
Jan 7 at 18:48
caissalover, comments will soon scroll off the screen, Instead of replying with a Comment, please instead click edit and enhance your original question with the new info, then click on (x) at the end of each comment and delete the Comments once their data's in your Question.
– K7AAY
Jan 7 at 21:48
caissalover, comments will soon scroll off the screen, Instead of replying with a Comment, please instead click edit and enhance your original question with the new info, then click on (x) at the end of each comment and delete the Comments once their data's in your Question.
– K7AAY
Jan 7 at 21:48
add a comment |
1 Answer
1
active
oldest
votes
Reinstalled Ubuntu. Guess there was some sort of mounting error with encryption. Not an optimal solution but tremendously practical. Took 20 mins after banging my head since last 40 hours. Backed up using Integrated graphics boot and reinstalled OS!
Thanks everyone!
answered Jan 8 at 19:43
caissalovercaissalover
165
add a comment |
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
Reinstalled Ubuntu. Guess there was some sort of mounting error with encryption. Not an optimal solution but tremendously practical. Took 20 mins after banging my head since last 40 hours. Backed up using Integrated graphics boot and reinstalled OS!
Thanks everyone!
answered Jan 8 at 19:43
caissalovercaissalover
165
add a comment |
Reinstalled Ubuntu. Guess there was some sort of mounting error with encryption. Not an optimal solution but tremendously practical. Took 20 mins after banging my head since last 40 hours. Backed up using Integrated graphics boot and reinstalled OS!
Thanks everyone!
answered Jan 8 at 19:43
caissalovercaissalover
165
add a comment |
Reinstalled Ubuntu. Guess there was some sort of mounting error with encryption. Not an optimal solution but tremendously practical. Took 20 mins after banging my head since last 40 hours. Backed up using Integrated graphics boot and reinstalled OS!
Thanks everyone!
answered Jan 8 at 19:43
caissalovercaissalover
165
Reinstalled Ubuntu. Guess there was some sort of mounting error with encryption. Not an optimal solution but tremendously practical. Took 20 mins after banging my head since last 40 hours. Backed up using Integrated graphics boot and reinstalled OS!
Thanks everyone!
answered Jan 8 at 19:43
caissalovercaissalover
165
answered Jan 8 at 19:43
caissalovercaissalover
165
answered Jan 8 at 19:43
caissalovercaissalover
165
answered Jan 8 at 19:43
caissalovercaissalover
165
165
add a comment |
add a comment |
1
Have you disabled Secure Boot in BIOS?
– Terrance
Jan 7 at 18:11
1
@Terrance There's no explicit secure boot option but these are the settings CSM Support : Enabled Other PCI Device ROM Priority : UEFI Only Storage Boot Option Control : Legacy Only I'm having a feeling of flipping PCI to Legacy?!
– caissalover
Jan 7 at 18:38
Nope, doesn't work with flipping the PCI Switch to Legacy, facing the same problem
– caissalover
Jan 7 at 18:41
That's right, these are Dual BIOS boards. Same thing I got for my sons computers. My bad! I think there is a BIOS setting to set the PCI to primary video instead of the on-board one.
– Terrance
Jan 7 at 18:48
caissalover, comments will soon scroll off the screen, Instead of replying with a Comment, please instead click edit and enhance your original question with the new info, then click on (x) at the end of each comment and delete the Comments once their data's in your Question.
– K7AAY
Jan 7 at 21:48