Can't change brightness in Ubuntu 16.04 LTS
I'm new to linux systems in general (I'm using Ubuntu 16.04 LTS) and I'm having difficulty in changing the brightness of my notebook.
When I use the Fn+F8 or Fn+F9 the brightness bar shows up but there is no change in the actual brightness of the screen.
I tried every method discribed in this post (How to adjust screen brightness in Ubuntu 14.04 (Trusty Tahr)?) to no success.
Installing and using the xbacklight has no effect, same for editing the brightness file in the "intel_backlight" file.
Anyone knows how to solve this?
screen brightness 16.04
add a comment |
I'm new to linux systems in general (I'm using Ubuntu 16.04 LTS) and I'm having difficulty in changing the brightness of my notebook.
When I use the Fn+F8 or Fn+F9 the brightness bar shows up but there is no change in the actual brightness of the screen.
I tried every method discribed in this post (How to adjust screen brightness in Ubuntu 14.04 (Trusty Tahr)?) to no success.
Installing and using the xbacklight has no effect, same for editing the brightness file in the "intel_backlight" file.
Anyone knows how to solve this?
screen brightness 16.04
1
I had the same problem using Toshiba C660 satelite a few years back. It wouldn't work, until I used the nvidia driver from the "additional drivers" tab, couldn't get it to fix, using the open-source driver. Does it happen to you, which driver are you using?
– Mookey
Apr 26 '16 at 6:30
I think you should add at least the model name
– lrkwz
Apr 26 '16 at 6:36
1
The graphics card is an Intel® HD Graphics 3000. I'm still not very familiar with the way linux handles the computer drivers and all, so I'm not sure what do you mean about "additional drivers tab".
– Andrei
Apr 26 '16 at 17:33
I found a strange workaround on my laptop (compaq cq70). Instead of pressing Fn+f7 to dim and Fn+f8 to brighten, I am able to use Ctrl+f10 to dim and press Ctrl+f11 to brighten.
– Joel Sjögren
Jul 24 '16 at 11:32
add a comment |
I'm new to linux systems in general (I'm using Ubuntu 16.04 LTS) and I'm having difficulty in changing the brightness of my notebook.
When I use the Fn+F8 or Fn+F9 the brightness bar shows up but there is no change in the actual brightness of the screen.
I tried every method discribed in this post (How to adjust screen brightness in Ubuntu 14.04 (Trusty Tahr)?) to no success.
Installing and using the xbacklight has no effect, same for editing the brightness file in the "intel_backlight" file.
Anyone knows how to solve this?
screen brightness 16.04
I'm new to linux systems in general (I'm using Ubuntu 16.04 LTS) and I'm having difficulty in changing the brightness of my notebook.
When I use the Fn+F8 or Fn+F9 the brightness bar shows up but there is no change in the actual brightness of the screen.
I tried every method discribed in this post (How to adjust screen brightness in Ubuntu 14.04 (Trusty Tahr)?) to no success.
Installing and using the xbacklight has no effect, same for editing the brightness file in the "intel_backlight" file.
Anyone knows how to solve this?
screen brightness 16.04
screen brightness 16.04
edited Apr 13 '17 at 12:24
Community♦
1
1
asked Apr 25 '16 at 22:15
AndreiAndrei
348144
348144
1
I had the same problem using Toshiba C660 satelite a few years back. It wouldn't work, until I used the nvidia driver from the "additional drivers" tab, couldn't get it to fix, using the open-source driver. Does it happen to you, which driver are you using?
– Mookey
Apr 26 '16 at 6:30
I think you should add at least the model name
– lrkwz
Apr 26 '16 at 6:36
1
The graphics card is an Intel® HD Graphics 3000. I'm still not very familiar with the way linux handles the computer drivers and all, so I'm not sure what do you mean about "additional drivers tab".
– Andrei
Apr 26 '16 at 17:33
I found a strange workaround on my laptop (compaq cq70). Instead of pressing Fn+f7 to dim and Fn+f8 to brighten, I am able to use Ctrl+f10 to dim and press Ctrl+f11 to brighten.
– Joel Sjögren
Jul 24 '16 at 11:32
add a comment |
1
I had the same problem using Toshiba C660 satelite a few years back. It wouldn't work, until I used the nvidia driver from the "additional drivers" tab, couldn't get it to fix, using the open-source driver. Does it happen to you, which driver are you using?
– Mookey
Apr 26 '16 at 6:30
I think you should add at least the model name
– lrkwz
Apr 26 '16 at 6:36
1
The graphics card is an Intel® HD Graphics 3000. I'm still not very familiar with the way linux handles the computer drivers and all, so I'm not sure what do you mean about "additional drivers tab".
– Andrei
Apr 26 '16 at 17:33
I found a strange workaround on my laptop (compaq cq70). Instead of pressing Fn+f7 to dim and Fn+f8 to brighten, I am able to use Ctrl+f10 to dim and press Ctrl+f11 to brighten.
– Joel Sjögren
Jul 24 '16 at 11:32
1
1
I had the same problem using Toshiba C660 satelite a few years back. It wouldn't work, until I used the nvidia driver from the "additional drivers" tab, couldn't get it to fix, using the open-source driver. Does it happen to you, which driver are you using?
– Mookey
Apr 26 '16 at 6:30
I had the same problem using Toshiba C660 satelite a few years back. It wouldn't work, until I used the nvidia driver from the "additional drivers" tab, couldn't get it to fix, using the open-source driver. Does it happen to you, which driver are you using?
– Mookey
Apr 26 '16 at 6:30
I think you should add at least the model name
– lrkwz
Apr 26 '16 at 6:36
I think you should add at least the model name
– lrkwz
Apr 26 '16 at 6:36
1
1
The graphics card is an Intel® HD Graphics 3000. I'm still not very familiar with the way linux handles the computer drivers and all, so I'm not sure what do you mean about "additional drivers tab".
– Andrei
Apr 26 '16 at 17:33
The graphics card is an Intel® HD Graphics 3000. I'm still not very familiar with the way linux handles the computer drivers and all, so I'm not sure what do you mean about "additional drivers tab".
– Andrei
Apr 26 '16 at 17:33
I found a strange workaround on my laptop (compaq cq70). Instead of pressing Fn+f7 to dim and Fn+f8 to brighten, I am able to use Ctrl+f10 to dim and press Ctrl+f11 to brighten.
– Joel Sjögren
Jul 24 '16 at 11:32
I found a strange workaround on my laptop (compaq cq70). Instead of pressing Fn+f7 to dim and Fn+f8 to brighten, I am able to use Ctrl+f10 to dim and press Ctrl+f11 to brighten.
– Joel Sjögren
Jul 24 '16 at 11:32
add a comment |
8 Answers
8
active
oldest
votes
This does not make your brightness function keys work, but is a workround.
Install Brightness Controller with the following commands:
sudo add-apt-repository ppa:apandada1/brightness-controller
sudo apt update
For Version 1 with up to 4 Monitor Support:
sudo apt install brightness-controller-simple
For Version 2 with Multi Monitor Support and other features:
sudo apt install brightness-controller
Note: This does not decrease the intensity of backlight, so won't save your batteries. But you can use this as a last resort to save your eyes. This also works in desktops, where there is no option to control brightness.
11
This not a brigthness controller. This just play with colors of system
– Harshit Chaudhary
May 5 '16 at 18:59
1
@HarshitChaudhary you are right..this is a bug with this version.Thanks!
– goonerDroid
May 12 '16 at 16:38
1
Refer this link for more details bugs.launchpad.net/hundredpapercuts/+bug/1270579
– goonerDroid
May 12 '16 at 16:44
Finally I can set the brightness. For some reason I only have primary brightness, secondary isn't working. And clearly it is secondary brightness that is used by settings menu and xbacklight. All the various grub solutions didn't work for me (I tried many of them). [I am on an ASUS A555U, ubuntu 16.04 - to spare anyone else the effort]
– JasoonS
Jun 20 '16 at 1:55
1
@JasoonS You don't have access to secondary brightness as your computer is connected to only one monitor.
– Archisman Panigrahi
Jun 20 '16 at 16:24
|
show 6 more comments
Hardware brightness buttons 🔅 🔆
Since Ubuntu LTS 18.04
Here is every step required for xbacklight
control:
$ sudo nano /etc/default/grub
and replace the corresponding line withGRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_backlight=vendor"
$ sudo update-grub
- No joking, make sure that the appropriate drivers are actually installed:
$ sudo apt install xbacklight xorg xserver-xorg-video-intel
- Issuing
$ find /sys -type f -name brightness
should yield something like/sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-eDP-1/intel_backlight/brightness
$ cd /sys/class
This directory should contain a soft link calledbrightness
to the brightness device discovered in the previous step. Should it be missing, create it:$ sudo ln -s /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-eDP-1/intel_backlight/brightness /sys/class/brightness
$ sudo nano /etc/X11/xorg.conf
should read:
Section "Device"
Identifier "Device0"
Driver "intel"
Option "Backlight" "intel_backlight"
EndSection
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Screen"
Identifier "Screen0"
Monitor "Monitor0"
Device "Device0"
EndSection
- The assignment of the physical
XF86MonBrightnessDown
andXF86MonBrightnessUp
keys is explained here for Xubuntu LTS or XFCE users. - Finally, reboot for these changes to take effect.
Finer-grained brightness control (all Ubuntu versions)
If brightness control happens to be too coarse, then make this additional adjustment.
Ubuntu LTS 16.04
To find out if you have integrated Intel video graphics, enter the following command:
$ ls /sys/class/backlight/
intel_backlight panasonic
At least intel_backlight
should be mentioned, most probably in addition to an OEM name like for example panasonic
, dell_backlight
, etc.
If this is the case, proceed with creating the following file
$ sudo nano /usr/share/X11/xorg.conf.d/20-intel.conf
containing the following lines:
Section "Device"
Identifier "card0"
Driver "intel"
Option "Backlight" "intel_backlight"
BusID "PCI:0:2:0"
EndSection
Reboot, and enjoy your backlight buttons! [Source]
Before Ubuntu LTS 16.04
Under (X)Ubuntu 14.04 LTS, brightness control on my Panasonic Toughbook CF-52 used to work fine by adding
acpi_osi=Linux
to the GRUB_CMDLINE_LINUX_DEFAULT=
line in /etc/default/grub
:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=Linux"
and issuing
$ sudo update-grub
after editing and before rebooting.
2
I tried this fix on my laptop which has an integrated Intel gfx card (with a backlight as revealed by the ls command as suggested), and with 2nd Nvidia 960M as well. On reboot I get a purple screen, but nothing else being displayed - I can change the background brightness, but I can't log in, as I can't see anything on the screen except a full screen purple wash.
– Tony Suffolk 66
Jan 27 '17 at 11:31
1
Solved my issue with Lenovo W520 @ Ubuntu 16.04.
– Igor Pomaranskiy
Mar 25 '17 at 11:10
1
This answers even works for me!!!. I am Linux mit xfce user.thanks alot Gin Gordon
– noone
Jul 22 '17 at 8:48
1
Fixed issue on 17.04 Ubuntu as well, fn keys now work again to control brightness.
– Michael Jackson
Sep 27 '17 at 13:36
1
The post-16.04 version also works on Debian Stretch
– Jonathan Landrum
Jan 22 '18 at 3:20
|
show 4 more comments
Another option is the application Redshift, which in addition to adjusting brightness can also adjust the color temperature to reduce the blue light at night.
Example usage: redshift -b 0.8
will set the brightness to 0.8 on a scale of 0 to 1
When using redshift, I get the problem of multiple commands being stacked, causing the screen to flicker. If i close my terminal, redshift stops working
– fastenedrex
Apr 14 '17 at 16:21
add a comment |
I use Lenovo Z570 and adding acpi_backlight=none
to /etc/default/grub
and updating grub worked nicely with Fn key.
add a comment |
In 16.04 there is a package in the repos called "backlight-indicator" which will use your camera to set backlight (or not) and differentially set it for AC and/or battery usage.
E: Unable to locate package backlight-indicator
No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 16.04.1 LTS Release: 16.04 Codename: xenial
– Enigma
Aug 30 '16 at 0:18
ubuntuupdates.org/package/atareao_atareao/xenial/main/base/…
– Andor Kiss
Aug 31 '16 at 10:29
you should add this @Enigma ppa:sudo add-apt-repository ppa:atareao/atareao
– Mohammad Rafigh
Nov 4 '16 at 21:31
add a comment |
I fixed this on my Asus UX303UB with a little difference:
- set to
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi="
(acpi_osi= did it for me, other options didn't work, got this from here). Of course after this runupdate-grub
. This make function keys respond showing the Ubuntu notification, but doesn't really change brightness. One more thing taken from other answers: sudo nano /usr/share/X11/xorg.conf.d/20-intel.conf
with contents:
Section "Device"
Identifier "card0"
Driver "intel"
Option "Backlight" "intel_backlight"
BusID "PCI:0:2:0"
EndSection
Now the only problem is to associate Fn+F7 to xset dpms force standby
to turn off the screen.
1
Didn't work for me. I got black screen after login.
– Jordan Silva
Mar 26 '17 at 19:31
1
This command spoiled my system. Got stuck during booting. Don't try this.
– sv_jan5
Jul 3 '17 at 4:23
@sv_jan5 @JordanSilva Strange, do you have 16.04.02? Exactly Asus UX303UB? Check withlsb_release -a
andsudo dmidecode -t baseboard
.
– Pablo Bianchi
Jul 3 '17 at 12:51
lsb_release -a
gave: No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 16.04.2 LTS Release: 16.04 Codename: xenial
– sv_jan5
Jul 3 '17 at 14:33
add a comment |
In my case, the problem was because of some issue with my graphics drivers. Changing them to a stable version solved the issue.
add a comment |
In XFCE, you must enable "Handle display brightness keys" on XFCE Power Manager, under the General tab.
add a comment |
protected by Community♦ May 30 '16 at 11:39
Thank you for your interest in this question.
Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).
Would you like to answer one of these unanswered questions instead?
8 Answers
8
active
oldest
votes
8 Answers
8
active
oldest
votes
active
oldest
votes
active
oldest
votes
This does not make your brightness function keys work, but is a workround.
Install Brightness Controller with the following commands:
sudo add-apt-repository ppa:apandada1/brightness-controller
sudo apt update
For Version 1 with up to 4 Monitor Support:
sudo apt install brightness-controller-simple
For Version 2 with Multi Monitor Support and other features:
sudo apt install brightness-controller
Note: This does not decrease the intensity of backlight, so won't save your batteries. But you can use this as a last resort to save your eyes. This also works in desktops, where there is no option to control brightness.
11
This not a brigthness controller. This just play with colors of system
– Harshit Chaudhary
May 5 '16 at 18:59
1
@HarshitChaudhary you are right..this is a bug with this version.Thanks!
– goonerDroid
May 12 '16 at 16:38
1
Refer this link for more details bugs.launchpad.net/hundredpapercuts/+bug/1270579
– goonerDroid
May 12 '16 at 16:44
Finally I can set the brightness. For some reason I only have primary brightness, secondary isn't working. And clearly it is secondary brightness that is used by settings menu and xbacklight. All the various grub solutions didn't work for me (I tried many of them). [I am on an ASUS A555U, ubuntu 16.04 - to spare anyone else the effort]
– JasoonS
Jun 20 '16 at 1:55
1
@JasoonS You don't have access to secondary brightness as your computer is connected to only one monitor.
– Archisman Panigrahi
Jun 20 '16 at 16:24
|
show 6 more comments
This does not make your brightness function keys work, but is a workround.
Install Brightness Controller with the following commands:
sudo add-apt-repository ppa:apandada1/brightness-controller
sudo apt update
For Version 1 with up to 4 Monitor Support:
sudo apt install brightness-controller-simple
For Version 2 with Multi Monitor Support and other features:
sudo apt install brightness-controller
Note: This does not decrease the intensity of backlight, so won't save your batteries. But you can use this as a last resort to save your eyes. This also works in desktops, where there is no option to control brightness.
11
This not a brigthness controller. This just play with colors of system
– Harshit Chaudhary
May 5 '16 at 18:59
1
@HarshitChaudhary you are right..this is a bug with this version.Thanks!
– goonerDroid
May 12 '16 at 16:38
1
Refer this link for more details bugs.launchpad.net/hundredpapercuts/+bug/1270579
– goonerDroid
May 12 '16 at 16:44
Finally I can set the brightness. For some reason I only have primary brightness, secondary isn't working. And clearly it is secondary brightness that is used by settings menu and xbacklight. All the various grub solutions didn't work for me (I tried many of them). [I am on an ASUS A555U, ubuntu 16.04 - to spare anyone else the effort]
– JasoonS
Jun 20 '16 at 1:55
1
@JasoonS You don't have access to secondary brightness as your computer is connected to only one monitor.
– Archisman Panigrahi
Jun 20 '16 at 16:24
|
show 6 more comments
This does not make your brightness function keys work, but is a workround.
Install Brightness Controller with the following commands:
sudo add-apt-repository ppa:apandada1/brightness-controller
sudo apt update
For Version 1 with up to 4 Monitor Support:
sudo apt install brightness-controller-simple
For Version 2 with Multi Monitor Support and other features:
sudo apt install brightness-controller
Note: This does not decrease the intensity of backlight, so won't save your batteries. But you can use this as a last resort to save your eyes. This also works in desktops, where there is no option to control brightness.
This does not make your brightness function keys work, but is a workround.
Install Brightness Controller with the following commands:
sudo add-apt-repository ppa:apandada1/brightness-controller
sudo apt update
For Version 1 with up to 4 Monitor Support:
sudo apt install brightness-controller-simple
For Version 2 with Multi Monitor Support and other features:
sudo apt install brightness-controller
Note: This does not decrease the intensity of backlight, so won't save your batteries. But you can use this as a last resort to save your eyes. This also works in desktops, where there is no option to control brightness.
edited Jun 3 '18 at 5:12
answered Apr 26 '16 at 9:09
Archisman PanigrahiArchisman Panigrahi
2,33032356
2,33032356
11
This not a brigthness controller. This just play with colors of system
– Harshit Chaudhary
May 5 '16 at 18:59
1
@HarshitChaudhary you are right..this is a bug with this version.Thanks!
– goonerDroid
May 12 '16 at 16:38
1
Refer this link for more details bugs.launchpad.net/hundredpapercuts/+bug/1270579
– goonerDroid
May 12 '16 at 16:44
Finally I can set the brightness. For some reason I only have primary brightness, secondary isn't working. And clearly it is secondary brightness that is used by settings menu and xbacklight. All the various grub solutions didn't work for me (I tried many of them). [I am on an ASUS A555U, ubuntu 16.04 - to spare anyone else the effort]
– JasoonS
Jun 20 '16 at 1:55
1
@JasoonS You don't have access to secondary brightness as your computer is connected to only one monitor.
– Archisman Panigrahi
Jun 20 '16 at 16:24
|
show 6 more comments
11
This not a brigthness controller. This just play with colors of system
– Harshit Chaudhary
May 5 '16 at 18:59
1
@HarshitChaudhary you are right..this is a bug with this version.Thanks!
– goonerDroid
May 12 '16 at 16:38
1
Refer this link for more details bugs.launchpad.net/hundredpapercuts/+bug/1270579
– goonerDroid
May 12 '16 at 16:44
Finally I can set the brightness. For some reason I only have primary brightness, secondary isn't working. And clearly it is secondary brightness that is used by settings menu and xbacklight. All the various grub solutions didn't work for me (I tried many of them). [I am on an ASUS A555U, ubuntu 16.04 - to spare anyone else the effort]
– JasoonS
Jun 20 '16 at 1:55
1
@JasoonS You don't have access to secondary brightness as your computer is connected to only one monitor.
– Archisman Panigrahi
Jun 20 '16 at 16:24
11
11
This not a brigthness controller. This just play with colors of system
– Harshit Chaudhary
May 5 '16 at 18:59
This not a brigthness controller. This just play with colors of system
– Harshit Chaudhary
May 5 '16 at 18:59
1
1
@HarshitChaudhary you are right..this is a bug with this version.Thanks!
– goonerDroid
May 12 '16 at 16:38
@HarshitChaudhary you are right..this is a bug with this version.Thanks!
– goonerDroid
May 12 '16 at 16:38
1
1
Refer this link for more details bugs.launchpad.net/hundredpapercuts/+bug/1270579
– goonerDroid
May 12 '16 at 16:44
Refer this link for more details bugs.launchpad.net/hundredpapercuts/+bug/1270579
– goonerDroid
May 12 '16 at 16:44
Finally I can set the brightness. For some reason I only have primary brightness, secondary isn't working. And clearly it is secondary brightness that is used by settings menu and xbacklight. All the various grub solutions didn't work for me (I tried many of them). [I am on an ASUS A555U, ubuntu 16.04 - to spare anyone else the effort]
– JasoonS
Jun 20 '16 at 1:55
Finally I can set the brightness. For some reason I only have primary brightness, secondary isn't working. And clearly it is secondary brightness that is used by settings menu and xbacklight. All the various grub solutions didn't work for me (I tried many of them). [I am on an ASUS A555U, ubuntu 16.04 - to spare anyone else the effort]
– JasoonS
Jun 20 '16 at 1:55
1
1
@JasoonS You don't have access to secondary brightness as your computer is connected to only one monitor.
– Archisman Panigrahi
Jun 20 '16 at 16:24
@JasoonS You don't have access to secondary brightness as your computer is connected to only one monitor.
– Archisman Panigrahi
Jun 20 '16 at 16:24
|
show 6 more comments
Hardware brightness buttons 🔅 🔆
Since Ubuntu LTS 18.04
Here is every step required for xbacklight
control:
$ sudo nano /etc/default/grub
and replace the corresponding line withGRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_backlight=vendor"
$ sudo update-grub
- No joking, make sure that the appropriate drivers are actually installed:
$ sudo apt install xbacklight xorg xserver-xorg-video-intel
- Issuing
$ find /sys -type f -name brightness
should yield something like/sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-eDP-1/intel_backlight/brightness
$ cd /sys/class
This directory should contain a soft link calledbrightness
to the brightness device discovered in the previous step. Should it be missing, create it:$ sudo ln -s /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-eDP-1/intel_backlight/brightness /sys/class/brightness
$ sudo nano /etc/X11/xorg.conf
should read:
Section "Device"
Identifier "Device0"
Driver "intel"
Option "Backlight" "intel_backlight"
EndSection
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Screen"
Identifier "Screen0"
Monitor "Monitor0"
Device "Device0"
EndSection
- The assignment of the physical
XF86MonBrightnessDown
andXF86MonBrightnessUp
keys is explained here for Xubuntu LTS or XFCE users. - Finally, reboot for these changes to take effect.
Finer-grained brightness control (all Ubuntu versions)
If brightness control happens to be too coarse, then make this additional adjustment.
Ubuntu LTS 16.04
To find out if you have integrated Intel video graphics, enter the following command:
$ ls /sys/class/backlight/
intel_backlight panasonic
At least intel_backlight
should be mentioned, most probably in addition to an OEM name like for example panasonic
, dell_backlight
, etc.
If this is the case, proceed with creating the following file
$ sudo nano /usr/share/X11/xorg.conf.d/20-intel.conf
containing the following lines:
Section "Device"
Identifier "card0"
Driver "intel"
Option "Backlight" "intel_backlight"
BusID "PCI:0:2:0"
EndSection
Reboot, and enjoy your backlight buttons! [Source]
Before Ubuntu LTS 16.04
Under (X)Ubuntu 14.04 LTS, brightness control on my Panasonic Toughbook CF-52 used to work fine by adding
acpi_osi=Linux
to the GRUB_CMDLINE_LINUX_DEFAULT=
line in /etc/default/grub
:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=Linux"
and issuing
$ sudo update-grub
after editing and before rebooting.
2
I tried this fix on my laptop which has an integrated Intel gfx card (with a backlight as revealed by the ls command as suggested), and with 2nd Nvidia 960M as well. On reboot I get a purple screen, but nothing else being displayed - I can change the background brightness, but I can't log in, as I can't see anything on the screen except a full screen purple wash.
– Tony Suffolk 66
Jan 27 '17 at 11:31
1
Solved my issue with Lenovo W520 @ Ubuntu 16.04.
– Igor Pomaranskiy
Mar 25 '17 at 11:10
1
This answers even works for me!!!. I am Linux mit xfce user.thanks alot Gin Gordon
– noone
Jul 22 '17 at 8:48
1
Fixed issue on 17.04 Ubuntu as well, fn keys now work again to control brightness.
– Michael Jackson
Sep 27 '17 at 13:36
1
The post-16.04 version also works on Debian Stretch
– Jonathan Landrum
Jan 22 '18 at 3:20
|
show 4 more comments
Hardware brightness buttons 🔅 🔆
Since Ubuntu LTS 18.04
Here is every step required for xbacklight
control:
$ sudo nano /etc/default/grub
and replace the corresponding line withGRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_backlight=vendor"
$ sudo update-grub
- No joking, make sure that the appropriate drivers are actually installed:
$ sudo apt install xbacklight xorg xserver-xorg-video-intel
- Issuing
$ find /sys -type f -name brightness
should yield something like/sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-eDP-1/intel_backlight/brightness
$ cd /sys/class
This directory should contain a soft link calledbrightness
to the brightness device discovered in the previous step. Should it be missing, create it:$ sudo ln -s /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-eDP-1/intel_backlight/brightness /sys/class/brightness
$ sudo nano /etc/X11/xorg.conf
should read:
Section "Device"
Identifier "Device0"
Driver "intel"
Option "Backlight" "intel_backlight"
EndSection
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Screen"
Identifier "Screen0"
Monitor "Monitor0"
Device "Device0"
EndSection
- The assignment of the physical
XF86MonBrightnessDown
andXF86MonBrightnessUp
keys is explained here for Xubuntu LTS or XFCE users. - Finally, reboot for these changes to take effect.
Finer-grained brightness control (all Ubuntu versions)
If brightness control happens to be too coarse, then make this additional adjustment.
Ubuntu LTS 16.04
To find out if you have integrated Intel video graphics, enter the following command:
$ ls /sys/class/backlight/
intel_backlight panasonic
At least intel_backlight
should be mentioned, most probably in addition to an OEM name like for example panasonic
, dell_backlight
, etc.
If this is the case, proceed with creating the following file
$ sudo nano /usr/share/X11/xorg.conf.d/20-intel.conf
containing the following lines:
Section "Device"
Identifier "card0"
Driver "intel"
Option "Backlight" "intel_backlight"
BusID "PCI:0:2:0"
EndSection
Reboot, and enjoy your backlight buttons! [Source]
Before Ubuntu LTS 16.04
Under (X)Ubuntu 14.04 LTS, brightness control on my Panasonic Toughbook CF-52 used to work fine by adding
acpi_osi=Linux
to the GRUB_CMDLINE_LINUX_DEFAULT=
line in /etc/default/grub
:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=Linux"
and issuing
$ sudo update-grub
after editing and before rebooting.
2
I tried this fix on my laptop which has an integrated Intel gfx card (with a backlight as revealed by the ls command as suggested), and with 2nd Nvidia 960M as well. On reboot I get a purple screen, but nothing else being displayed - I can change the background brightness, but I can't log in, as I can't see anything on the screen except a full screen purple wash.
– Tony Suffolk 66
Jan 27 '17 at 11:31
1
Solved my issue with Lenovo W520 @ Ubuntu 16.04.
– Igor Pomaranskiy
Mar 25 '17 at 11:10
1
This answers even works for me!!!. I am Linux mit xfce user.thanks alot Gin Gordon
– noone
Jul 22 '17 at 8:48
1
Fixed issue on 17.04 Ubuntu as well, fn keys now work again to control brightness.
– Michael Jackson
Sep 27 '17 at 13:36
1
The post-16.04 version also works on Debian Stretch
– Jonathan Landrum
Jan 22 '18 at 3:20
|
show 4 more comments
Hardware brightness buttons 🔅 🔆
Since Ubuntu LTS 18.04
Here is every step required for xbacklight
control:
$ sudo nano /etc/default/grub
and replace the corresponding line withGRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_backlight=vendor"
$ sudo update-grub
- No joking, make sure that the appropriate drivers are actually installed:
$ sudo apt install xbacklight xorg xserver-xorg-video-intel
- Issuing
$ find /sys -type f -name brightness
should yield something like/sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-eDP-1/intel_backlight/brightness
$ cd /sys/class
This directory should contain a soft link calledbrightness
to the brightness device discovered in the previous step. Should it be missing, create it:$ sudo ln -s /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-eDP-1/intel_backlight/brightness /sys/class/brightness
$ sudo nano /etc/X11/xorg.conf
should read:
Section "Device"
Identifier "Device0"
Driver "intel"
Option "Backlight" "intel_backlight"
EndSection
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Screen"
Identifier "Screen0"
Monitor "Monitor0"
Device "Device0"
EndSection
- The assignment of the physical
XF86MonBrightnessDown
andXF86MonBrightnessUp
keys is explained here for Xubuntu LTS or XFCE users. - Finally, reboot for these changes to take effect.
Finer-grained brightness control (all Ubuntu versions)
If brightness control happens to be too coarse, then make this additional adjustment.
Ubuntu LTS 16.04
To find out if you have integrated Intel video graphics, enter the following command:
$ ls /sys/class/backlight/
intel_backlight panasonic
At least intel_backlight
should be mentioned, most probably in addition to an OEM name like for example panasonic
, dell_backlight
, etc.
If this is the case, proceed with creating the following file
$ sudo nano /usr/share/X11/xorg.conf.d/20-intel.conf
containing the following lines:
Section "Device"
Identifier "card0"
Driver "intel"
Option "Backlight" "intel_backlight"
BusID "PCI:0:2:0"
EndSection
Reboot, and enjoy your backlight buttons! [Source]
Before Ubuntu LTS 16.04
Under (X)Ubuntu 14.04 LTS, brightness control on my Panasonic Toughbook CF-52 used to work fine by adding
acpi_osi=Linux
to the GRUB_CMDLINE_LINUX_DEFAULT=
line in /etc/default/grub
:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=Linux"
and issuing
$ sudo update-grub
after editing and before rebooting.
Hardware brightness buttons 🔅 🔆
Since Ubuntu LTS 18.04
Here is every step required for xbacklight
control:
$ sudo nano /etc/default/grub
and replace the corresponding line withGRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_backlight=vendor"
$ sudo update-grub
- No joking, make sure that the appropriate drivers are actually installed:
$ sudo apt install xbacklight xorg xserver-xorg-video-intel
- Issuing
$ find /sys -type f -name brightness
should yield something like/sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-eDP-1/intel_backlight/brightness
$ cd /sys/class
This directory should contain a soft link calledbrightness
to the brightness device discovered in the previous step. Should it be missing, create it:$ sudo ln -s /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-eDP-1/intel_backlight/brightness /sys/class/brightness
$ sudo nano /etc/X11/xorg.conf
should read:
Section "Device"
Identifier "Device0"
Driver "intel"
Option "Backlight" "intel_backlight"
EndSection
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Screen"
Identifier "Screen0"
Monitor "Monitor0"
Device "Device0"
EndSection
- The assignment of the physical
XF86MonBrightnessDown
andXF86MonBrightnessUp
keys is explained here for Xubuntu LTS or XFCE users. - Finally, reboot for these changes to take effect.
Finer-grained brightness control (all Ubuntu versions)
If brightness control happens to be too coarse, then make this additional adjustment.
Ubuntu LTS 16.04
To find out if you have integrated Intel video graphics, enter the following command:
$ ls /sys/class/backlight/
intel_backlight panasonic
At least intel_backlight
should be mentioned, most probably in addition to an OEM name like for example panasonic
, dell_backlight
, etc.
If this is the case, proceed with creating the following file
$ sudo nano /usr/share/X11/xorg.conf.d/20-intel.conf
containing the following lines:
Section "Device"
Identifier "card0"
Driver "intel"
Option "Backlight" "intel_backlight"
BusID "PCI:0:2:0"
EndSection
Reboot, and enjoy your backlight buttons! [Source]
Before Ubuntu LTS 16.04
Under (X)Ubuntu 14.04 LTS, brightness control on my Panasonic Toughbook CF-52 used to work fine by adding
acpi_osi=Linux
to the GRUB_CMDLINE_LINUX_DEFAULT=
line in /etc/default/grub
:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=Linux"
and issuing
$ sudo update-grub
after editing and before rebooting.
edited Mar 17 at 9:00
answered Dec 11 '16 at 15:27
Serge StroobandtSerge Stroobandt
2,2212034
2,2212034
2
I tried this fix on my laptop which has an integrated Intel gfx card (with a backlight as revealed by the ls command as suggested), and with 2nd Nvidia 960M as well. On reboot I get a purple screen, but nothing else being displayed - I can change the background brightness, but I can't log in, as I can't see anything on the screen except a full screen purple wash.
– Tony Suffolk 66
Jan 27 '17 at 11:31
1
Solved my issue with Lenovo W520 @ Ubuntu 16.04.
– Igor Pomaranskiy
Mar 25 '17 at 11:10
1
This answers even works for me!!!. I am Linux mit xfce user.thanks alot Gin Gordon
– noone
Jul 22 '17 at 8:48
1
Fixed issue on 17.04 Ubuntu as well, fn keys now work again to control brightness.
– Michael Jackson
Sep 27 '17 at 13:36
1
The post-16.04 version also works on Debian Stretch
– Jonathan Landrum
Jan 22 '18 at 3:20
|
show 4 more comments
2
I tried this fix on my laptop which has an integrated Intel gfx card (with a backlight as revealed by the ls command as suggested), and with 2nd Nvidia 960M as well. On reboot I get a purple screen, but nothing else being displayed - I can change the background brightness, but I can't log in, as I can't see anything on the screen except a full screen purple wash.
– Tony Suffolk 66
Jan 27 '17 at 11:31
1
Solved my issue with Lenovo W520 @ Ubuntu 16.04.
– Igor Pomaranskiy
Mar 25 '17 at 11:10
1
This answers even works for me!!!. I am Linux mit xfce user.thanks alot Gin Gordon
– noone
Jul 22 '17 at 8:48
1
Fixed issue on 17.04 Ubuntu as well, fn keys now work again to control brightness.
– Michael Jackson
Sep 27 '17 at 13:36
1
The post-16.04 version also works on Debian Stretch
– Jonathan Landrum
Jan 22 '18 at 3:20
2
2
I tried this fix on my laptop which has an integrated Intel gfx card (with a backlight as revealed by the ls command as suggested), and with 2nd Nvidia 960M as well. On reboot I get a purple screen, but nothing else being displayed - I can change the background brightness, but I can't log in, as I can't see anything on the screen except a full screen purple wash.
– Tony Suffolk 66
Jan 27 '17 at 11:31
I tried this fix on my laptop which has an integrated Intel gfx card (with a backlight as revealed by the ls command as suggested), and with 2nd Nvidia 960M as well. On reboot I get a purple screen, but nothing else being displayed - I can change the background brightness, but I can't log in, as I can't see anything on the screen except a full screen purple wash.
– Tony Suffolk 66
Jan 27 '17 at 11:31
1
1
Solved my issue with Lenovo W520 @ Ubuntu 16.04.
– Igor Pomaranskiy
Mar 25 '17 at 11:10
Solved my issue with Lenovo W520 @ Ubuntu 16.04.
– Igor Pomaranskiy
Mar 25 '17 at 11:10
1
1
This answers even works for me!!!. I am Linux mit xfce user.thanks alot Gin Gordon
– noone
Jul 22 '17 at 8:48
This answers even works for me!!!. I am Linux mit xfce user.thanks alot Gin Gordon
– noone
Jul 22 '17 at 8:48
1
1
Fixed issue on 17.04 Ubuntu as well, fn keys now work again to control brightness.
– Michael Jackson
Sep 27 '17 at 13:36
Fixed issue on 17.04 Ubuntu as well, fn keys now work again to control brightness.
– Michael Jackson
Sep 27 '17 at 13:36
1
1
The post-16.04 version also works on Debian Stretch
– Jonathan Landrum
Jan 22 '18 at 3:20
The post-16.04 version also works on Debian Stretch
– Jonathan Landrum
Jan 22 '18 at 3:20
|
show 4 more comments
Another option is the application Redshift, which in addition to adjusting brightness can also adjust the color temperature to reduce the blue light at night.
Example usage: redshift -b 0.8
will set the brightness to 0.8 on a scale of 0 to 1
When using redshift, I get the problem of multiple commands being stacked, causing the screen to flicker. If i close my terminal, redshift stops working
– fastenedrex
Apr 14 '17 at 16:21
add a comment |
Another option is the application Redshift, which in addition to adjusting brightness can also adjust the color temperature to reduce the blue light at night.
Example usage: redshift -b 0.8
will set the brightness to 0.8 on a scale of 0 to 1
When using redshift, I get the problem of multiple commands being stacked, causing the screen to flicker. If i close my terminal, redshift stops working
– fastenedrex
Apr 14 '17 at 16:21
add a comment |
Another option is the application Redshift, which in addition to adjusting brightness can also adjust the color temperature to reduce the blue light at night.
Example usage: redshift -b 0.8
will set the brightness to 0.8 on a scale of 0 to 1
Another option is the application Redshift, which in addition to adjusting brightness can also adjust the color temperature to reduce the blue light at night.
Example usage: redshift -b 0.8
will set the brightness to 0.8 on a scale of 0 to 1
answered Jul 3 '16 at 12:52
xjixji
437517
437517
When using redshift, I get the problem of multiple commands being stacked, causing the screen to flicker. If i close my terminal, redshift stops working
– fastenedrex
Apr 14 '17 at 16:21
add a comment |
When using redshift, I get the problem of multiple commands being stacked, causing the screen to flicker. If i close my terminal, redshift stops working
– fastenedrex
Apr 14 '17 at 16:21
When using redshift, I get the problem of multiple commands being stacked, causing the screen to flicker. If i close my terminal, redshift stops working
– fastenedrex
Apr 14 '17 at 16:21
When using redshift, I get the problem of multiple commands being stacked, causing the screen to flicker. If i close my terminal, redshift stops working
– fastenedrex
Apr 14 '17 at 16:21
add a comment |
I use Lenovo Z570 and adding acpi_backlight=none
to /etc/default/grub
and updating grub worked nicely with Fn key.
add a comment |
I use Lenovo Z570 and adding acpi_backlight=none
to /etc/default/grub
and updating grub worked nicely with Fn key.
add a comment |
I use Lenovo Z570 and adding acpi_backlight=none
to /etc/default/grub
and updating grub worked nicely with Fn key.
I use Lenovo Z570 and adding acpi_backlight=none
to /etc/default/grub
and updating grub worked nicely with Fn key.
edited Oct 2 '16 at 23:44
andrew.46
22.2k1470150
22.2k1470150
answered May 14 '16 at 6:39
sanjay Joshisanjay Joshi
311
311
add a comment |
add a comment |
In 16.04 there is a package in the repos called "backlight-indicator" which will use your camera to set backlight (or not) and differentially set it for AC and/or battery usage.
E: Unable to locate package backlight-indicator
No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 16.04.1 LTS Release: 16.04 Codename: xenial
– Enigma
Aug 30 '16 at 0:18
ubuntuupdates.org/package/atareao_atareao/xenial/main/base/…
– Andor Kiss
Aug 31 '16 at 10:29
you should add this @Enigma ppa:sudo add-apt-repository ppa:atareao/atareao
– Mohammad Rafigh
Nov 4 '16 at 21:31
add a comment |
In 16.04 there is a package in the repos called "backlight-indicator" which will use your camera to set backlight (or not) and differentially set it for AC and/or battery usage.
E: Unable to locate package backlight-indicator
No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 16.04.1 LTS Release: 16.04 Codename: xenial
– Enigma
Aug 30 '16 at 0:18
ubuntuupdates.org/package/atareao_atareao/xenial/main/base/…
– Andor Kiss
Aug 31 '16 at 10:29
you should add this @Enigma ppa:sudo add-apt-repository ppa:atareao/atareao
– Mohammad Rafigh
Nov 4 '16 at 21:31
add a comment |
In 16.04 there is a package in the repos called "backlight-indicator" which will use your camera to set backlight (or not) and differentially set it for AC and/or battery usage.
In 16.04 there is a package in the repos called "backlight-indicator" which will use your camera to set backlight (or not) and differentially set it for AC and/or battery usage.
answered May 19 '16 at 16:52
Andor KissAndor Kiss
133110
133110
E: Unable to locate package backlight-indicator
No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 16.04.1 LTS Release: 16.04 Codename: xenial
– Enigma
Aug 30 '16 at 0:18
ubuntuupdates.org/package/atareao_atareao/xenial/main/base/…
– Andor Kiss
Aug 31 '16 at 10:29
you should add this @Enigma ppa:sudo add-apt-repository ppa:atareao/atareao
– Mohammad Rafigh
Nov 4 '16 at 21:31
add a comment |
E: Unable to locate package backlight-indicator
No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 16.04.1 LTS Release: 16.04 Codename: xenial
– Enigma
Aug 30 '16 at 0:18
ubuntuupdates.org/package/atareao_atareao/xenial/main/base/…
– Andor Kiss
Aug 31 '16 at 10:29
you should add this @Enigma ppa:sudo add-apt-repository ppa:atareao/atareao
– Mohammad Rafigh
Nov 4 '16 at 21:31
E: Unable to locate package backlight-indicator
No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 16.04.1 LTS Release: 16.04 Codename: xenial
– Enigma
Aug 30 '16 at 0:18
E: Unable to locate package backlight-indicator
No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 16.04.1 LTS Release: 16.04 Codename: xenial
– Enigma
Aug 30 '16 at 0:18
ubuntuupdates.org/package/atareao_atareao/xenial/main/base/…
– Andor Kiss
Aug 31 '16 at 10:29
ubuntuupdates.org/package/atareao_atareao/xenial/main/base/…
– Andor Kiss
Aug 31 '16 at 10:29
you should add this @Enigma ppa:
sudo add-apt-repository ppa:atareao/atareao
– Mohammad Rafigh
Nov 4 '16 at 21:31
you should add this @Enigma ppa:
sudo add-apt-repository ppa:atareao/atareao
– Mohammad Rafigh
Nov 4 '16 at 21:31
add a comment |
I fixed this on my Asus UX303UB with a little difference:
- set to
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi="
(acpi_osi= did it for me, other options didn't work, got this from here). Of course after this runupdate-grub
. This make function keys respond showing the Ubuntu notification, but doesn't really change brightness. One more thing taken from other answers: sudo nano /usr/share/X11/xorg.conf.d/20-intel.conf
with contents:
Section "Device"
Identifier "card0"
Driver "intel"
Option "Backlight" "intel_backlight"
BusID "PCI:0:2:0"
EndSection
Now the only problem is to associate Fn+F7 to xset dpms force standby
to turn off the screen.
1
Didn't work for me. I got black screen after login.
– Jordan Silva
Mar 26 '17 at 19:31
1
This command spoiled my system. Got stuck during booting. Don't try this.
– sv_jan5
Jul 3 '17 at 4:23
@sv_jan5 @JordanSilva Strange, do you have 16.04.02? Exactly Asus UX303UB? Check withlsb_release -a
andsudo dmidecode -t baseboard
.
– Pablo Bianchi
Jul 3 '17 at 12:51
lsb_release -a
gave: No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 16.04.2 LTS Release: 16.04 Codename: xenial
– sv_jan5
Jul 3 '17 at 14:33
add a comment |
I fixed this on my Asus UX303UB with a little difference:
- set to
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi="
(acpi_osi= did it for me, other options didn't work, got this from here). Of course after this runupdate-grub
. This make function keys respond showing the Ubuntu notification, but doesn't really change brightness. One more thing taken from other answers: sudo nano /usr/share/X11/xorg.conf.d/20-intel.conf
with contents:
Section "Device"
Identifier "card0"
Driver "intel"
Option "Backlight" "intel_backlight"
BusID "PCI:0:2:0"
EndSection
Now the only problem is to associate Fn+F7 to xset dpms force standby
to turn off the screen.
1
Didn't work for me. I got black screen after login.
– Jordan Silva
Mar 26 '17 at 19:31
1
This command spoiled my system. Got stuck during booting. Don't try this.
– sv_jan5
Jul 3 '17 at 4:23
@sv_jan5 @JordanSilva Strange, do you have 16.04.02? Exactly Asus UX303UB? Check withlsb_release -a
andsudo dmidecode -t baseboard
.
– Pablo Bianchi
Jul 3 '17 at 12:51
lsb_release -a
gave: No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 16.04.2 LTS Release: 16.04 Codename: xenial
– sv_jan5
Jul 3 '17 at 14:33
add a comment |
I fixed this on my Asus UX303UB with a little difference:
- set to
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi="
(acpi_osi= did it for me, other options didn't work, got this from here). Of course after this runupdate-grub
. This make function keys respond showing the Ubuntu notification, but doesn't really change brightness. One more thing taken from other answers: sudo nano /usr/share/X11/xorg.conf.d/20-intel.conf
with contents:
Section "Device"
Identifier "card0"
Driver "intel"
Option "Backlight" "intel_backlight"
BusID "PCI:0:2:0"
EndSection
Now the only problem is to associate Fn+F7 to xset dpms force standby
to turn off the screen.
I fixed this on my Asus UX303UB with a little difference:
- set to
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi="
(acpi_osi= did it for me, other options didn't work, got this from here). Of course after this runupdate-grub
. This make function keys respond showing the Ubuntu notification, but doesn't really change brightness. One more thing taken from other answers: sudo nano /usr/share/X11/xorg.conf.d/20-intel.conf
with contents:
Section "Device"
Identifier "card0"
Driver "intel"
Option "Backlight" "intel_backlight"
BusID "PCI:0:2:0"
EndSection
Now the only problem is to associate Fn+F7 to xset dpms force standby
to turn off the screen.
edited Apr 13 '17 at 12:25
Community♦
1
1
answered Dec 19 '16 at 3:48
Pablo BianchiPablo Bianchi
2,98021535
2,98021535
1
Didn't work for me. I got black screen after login.
– Jordan Silva
Mar 26 '17 at 19:31
1
This command spoiled my system. Got stuck during booting. Don't try this.
– sv_jan5
Jul 3 '17 at 4:23
@sv_jan5 @JordanSilva Strange, do you have 16.04.02? Exactly Asus UX303UB? Check withlsb_release -a
andsudo dmidecode -t baseboard
.
– Pablo Bianchi
Jul 3 '17 at 12:51
lsb_release -a
gave: No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 16.04.2 LTS Release: 16.04 Codename: xenial
– sv_jan5
Jul 3 '17 at 14:33
add a comment |
1
Didn't work for me. I got black screen after login.
– Jordan Silva
Mar 26 '17 at 19:31
1
This command spoiled my system. Got stuck during booting. Don't try this.
– sv_jan5
Jul 3 '17 at 4:23
@sv_jan5 @JordanSilva Strange, do you have 16.04.02? Exactly Asus UX303UB? Check withlsb_release -a
andsudo dmidecode -t baseboard
.
– Pablo Bianchi
Jul 3 '17 at 12:51
lsb_release -a
gave: No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 16.04.2 LTS Release: 16.04 Codename: xenial
– sv_jan5
Jul 3 '17 at 14:33
1
1
Didn't work for me. I got black screen after login.
– Jordan Silva
Mar 26 '17 at 19:31
Didn't work for me. I got black screen after login.
– Jordan Silva
Mar 26 '17 at 19:31
1
1
This command spoiled my system. Got stuck during booting. Don't try this.
– sv_jan5
Jul 3 '17 at 4:23
This command spoiled my system. Got stuck during booting. Don't try this.
– sv_jan5
Jul 3 '17 at 4:23
@sv_jan5 @JordanSilva Strange, do you have 16.04.02? Exactly Asus UX303UB? Check with
lsb_release -a
and sudo dmidecode -t baseboard
.– Pablo Bianchi
Jul 3 '17 at 12:51
@sv_jan5 @JordanSilva Strange, do you have 16.04.02? Exactly Asus UX303UB? Check with
lsb_release -a
and sudo dmidecode -t baseboard
.– Pablo Bianchi
Jul 3 '17 at 12:51
lsb_release -a
gave: No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 16.04.2 LTS Release: 16.04 Codename: xenial– sv_jan5
Jul 3 '17 at 14:33
lsb_release -a
gave: No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 16.04.2 LTS Release: 16.04 Codename: xenial– sv_jan5
Jul 3 '17 at 14:33
add a comment |
In my case, the problem was because of some issue with my graphics drivers. Changing them to a stable version solved the issue.
add a comment |
In my case, the problem was because of some issue with my graphics drivers. Changing them to a stable version solved the issue.
add a comment |
In my case, the problem was because of some issue with my graphics drivers. Changing them to a stable version solved the issue.
In my case, the problem was because of some issue with my graphics drivers. Changing them to a stable version solved the issue.
answered Jul 4 '17 at 4:14
sv_jan5sv_jan5
1218
1218
add a comment |
add a comment |
In XFCE, you must enable "Handle display brightness keys" on XFCE Power Manager, under the General tab.
add a comment |
In XFCE, you must enable "Handle display brightness keys" on XFCE Power Manager, under the General tab.
add a comment |
In XFCE, you must enable "Handle display brightness keys" on XFCE Power Manager, under the General tab.
In XFCE, you must enable "Handle display brightness keys" on XFCE Power Manager, under the General tab.
answered Sep 10 '18 at 9:12
Nabil KadimiNabil Kadimi
1,1111816
1,1111816
add a comment |
add a comment |
protected by Community♦ May 30 '16 at 11:39
Thank you for your interest in this question.
Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site (the association bonus does not count).
Would you like to answer one of these unanswered questions instead?
1
I had the same problem using Toshiba C660 satelite a few years back. It wouldn't work, until I used the nvidia driver from the "additional drivers" tab, couldn't get it to fix, using the open-source driver. Does it happen to you, which driver are you using?
– Mookey
Apr 26 '16 at 6:30
I think you should add at least the model name
– lrkwz
Apr 26 '16 at 6:36
1
The graphics card is an Intel® HD Graphics 3000. I'm still not very familiar with the way linux handles the computer drivers and all, so I'm not sure what do you mean about "additional drivers tab".
– Andrei
Apr 26 '16 at 17:33
I found a strange workaround on my laptop (compaq cq70). Instead of pressing Fn+f7 to dim and Fn+f8 to brighten, I am able to use Ctrl+f10 to dim and press Ctrl+f11 to brighten.
– Joel Sjögren
Jul 24 '16 at 11:32