How can I connect to a DFS share on a Windows 2016 Server?
My company host our data on a Windows Server 2016. I am running Xubuntu (version 15.04) and cannot get connected to our share using the mount command.
This is an example of command I unsuccessfully tried (I wanted to mount the folderFolder4underTest_mntin the example below):
sudo mount -v -t cifs //domain.adress.org/dfs/Folder1/Folder2/Folder3/Folder4 /home/alkalyzer/Test_mnt -o username=domain/myusername,domain=domain.adress.org,rw
While doing so (after having provided my password at the prompt), I received the following error message :
mount error(13): Permission denied
And this is what is written in/var/log/syslog:
Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
CIFS VFS: Send error in SessSetup = -13
CIFS VFS: cifs_mount failed w/return code = -13
I followed different methods to try to get this to work:
- Changing
workgrouptoworkgroup = DOMAINin/etc/samba/smb.conf
- Adding
wins support = yesin/etc/samba/smb.conf
- Adding both
client min protocol = SMB2andclient max protocol = SMB3in/etc/samba/smb.conf
Adding these two lines in
/etc/request-key.conf:
create cifs.spnego * * /usr/sbin/cifs.upcall -t %k
create dns_resolver * * /usr/sbin/cifs.upcall %k
I can connect to this share by using a file-browser (Thunar or Nautilus) but I cannot browse the folder contained in/run/user/1000/gvfswhich corresponds to the remote folder (ls indicates that all permissions and ownerships are filled by question mark for this folder).
I can also connect to this share with smbclient with this command:
smbclient //domain.adress.org/dfs/ -Udomain/myusername -Whdomain.adress.org -D Folder1/Folder2/Folder3/Folder4
How can I mount these remote folders with the mount command?
networking server mount samba
edited Jan 22 at 20:12
Zanna
50.7k13136241
asked Sep 26 '18 at 16:01
AlkalyzerAlkalyzer
217312
add a comment |
My company host our data on a Windows Server 2016. I am running Xubuntu (version 15.04) and cannot get connected to our share using the mount command.
This is an example of command I unsuccessfully tried (I wanted to mount the folderFolder4underTest_mntin the example below):
sudo mount -v -t cifs //domain.adress.org/dfs/Folder1/Folder2/Folder3/Folder4 /home/alkalyzer/Test_mnt -o username=domain/myusername,domain=domain.adress.org,rw
While doing so (after having provided my password at the prompt), I received the following error message :
mount error(13): Permission denied
And this is what is written in/var/log/syslog:
Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
CIFS VFS: Send error in SessSetup = -13
CIFS VFS: cifs_mount failed w/return code = -13
I followed different methods to try to get this to work:
- Changing
workgrouptoworkgroup = DOMAINin/etc/samba/smb.conf
- Adding
wins support = yesin/etc/samba/smb.conf
- Adding both
client min protocol = SMB2andclient max protocol = SMB3in/etc/samba/smb.conf
Adding these two lines in
/etc/request-key.conf:
create cifs.spnego * * /usr/sbin/cifs.upcall -t %k
create dns_resolver * * /usr/sbin/cifs.upcall %k
I can connect to this share by using a file-browser (Thunar or Nautilus) but I cannot browse the folder contained in/run/user/1000/gvfswhich corresponds to the remote folder (ls indicates that all permissions and ownerships are filled by question mark for this folder).
I can also connect to this share with smbclient with this command:
smbclient //domain.adress.org/dfs/ -Udomain/myusername -Whdomain.adress.org -D Folder1/Folder2/Folder3/Folder4
How can I mount these remote folders with the mount command?
networking server mount samba
edited Jan 22 at 20:12
Zanna
50.7k13136241
asked Sep 26 '18 at 16:01
AlkalyzerAlkalyzer
217312
add a comment |
My company host our data on a Windows Server 2016. I am running Xubuntu (version 15.04) and cannot get connected to our share using the mount command.
This is an example of command I unsuccessfully tried (I wanted to mount the folderFolder4underTest_mntin the example below):
sudo mount -v -t cifs //domain.adress.org/dfs/Folder1/Folder2/Folder3/Folder4 /home/alkalyzer/Test_mnt -o username=domain/myusername,domain=domain.adress.org,rw
While doing so (after having provided my password at the prompt), I received the following error message :
mount error(13): Permission denied
And this is what is written in/var/log/syslog:
Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
CIFS VFS: Send error in SessSetup = -13
CIFS VFS: cifs_mount failed w/return code = -13
I followed different methods to try to get this to work:
- Changing
workgrouptoworkgroup = DOMAINin/etc/samba/smb.conf
- Adding
wins support = yesin/etc/samba/smb.conf
- Adding both
client min protocol = SMB2andclient max protocol = SMB3in/etc/samba/smb.conf
Adding these two lines in
/etc/request-key.conf:
create cifs.spnego * * /usr/sbin/cifs.upcall -t %k
create dns_resolver * * /usr/sbin/cifs.upcall %k
I can connect to this share by using a file-browser (Thunar or Nautilus) but I cannot browse the folder contained in/run/user/1000/gvfswhich corresponds to the remote folder (ls indicates that all permissions and ownerships are filled by question mark for this folder).
I can also connect to this share with smbclient with this command:
smbclient //domain.adress.org/dfs/ -Udomain/myusername -Whdomain.adress.org -D Folder1/Folder2/Folder3/Folder4
How can I mount these remote folders with the mount command?
networking server mount samba
edited Jan 22 at 20:12
Zanna
50.7k13136241
asked Sep 26 '18 at 16:01
AlkalyzerAlkalyzer
217312
My company host our data on a Windows Server 2016. I am running Xubuntu (version 15.04) and cannot get connected to our share using the mount command.
This is an example of command I unsuccessfully tried (I wanted to mount the folderFolder4underTest_mntin the example below):
sudo mount -v -t cifs //domain.adress.org/dfs/Folder1/Folder2/Folder3/Folder4 /home/alkalyzer/Test_mnt -o username=domain/myusername,domain=domain.adress.org,rw
While doing so (after having provided my password at the prompt), I received the following error message :
mount error(13): Permission denied
And this is what is written in/var/log/syslog:
Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
CIFS VFS: Send error in SessSetup = -13
CIFS VFS: cifs_mount failed w/return code = -13
I followed different methods to try to get this to work:
- Changing
workgrouptoworkgroup = DOMAINin/etc/samba/smb.conf
- Adding
wins support = yesin/etc/samba/smb.conf
- Adding both
client min protocol = SMB2andclient max protocol = SMB3in/etc/samba/smb.conf
Adding these two lines in
/etc/request-key.conf:
create cifs.spnego * * /usr/sbin/cifs.upcall -t %k
create dns_resolver * * /usr/sbin/cifs.upcall %k
I can connect to this share by using a file-browser (Thunar or Nautilus) but I cannot browse the folder contained in/run/user/1000/gvfswhich corresponds to the remote folder (ls indicates that all permissions and ownerships are filled by question mark for this folder).
I can also connect to this share with smbclient with this command:
smbclient //domain.adress.org/dfs/ -Udomain/myusername -Whdomain.adress.org -D Folder1/Folder2/Folder3/Folder4
How can I mount these remote folders with the mount command?
networking server mount samba
networking server mount samba
edited Jan 22 at 20:12
Zanna
50.7k13136241
asked Sep 26 '18 at 16:01
AlkalyzerAlkalyzer
217312
edited Jan 22 at 20:12
Zanna
50.7k13136241
asked Sep 26 '18 at 16:01
AlkalyzerAlkalyzer
217312
edited Jan 22 at 20:12
Zanna
50.7k13136241
edited Jan 22 at 20:12
Zanna
50.7k13136241
edited Jan 22 at 20:12
Zanna
50.7k13136241
50.7k13136241
asked Sep 26 '18 at 16:01
AlkalyzerAlkalyzer
217312
asked Sep 26 '18 at 16:01
AlkalyzerAlkalyzer
217312
asked Sep 26 '18 at 16:01
AlkalyzerAlkalyzer
217312
217312
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
I found a solution in this blog post
Install the keyutils package.
sudo apt-get install keyutils
Now I am able to mount the dfs share without a servername:
sudo mount -t cifs //mydfsdomain/namespaceroot/sharedfolder /mnt/sharedfolder -o credentials=/etc/cred.file
edited Jan 22 at 20:10
Zanna
50.7k13136241
answered Jan 22 at 11:04
Thomas KaminskiThomas Kaminski
111
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1078645%2fhow-can-i-connect-to-a-dfs-share-on-a-windows-2016-server%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
I found a solution in this blog post
Install the keyutils package.
sudo apt-get install keyutils
Now I am able to mount the dfs share without a servername:
sudo mount -t cifs //mydfsdomain/namespaceroot/sharedfolder /mnt/sharedfolder -o credentials=/etc/cred.file
edited Jan 22 at 20:10
Zanna
50.7k13136241
answered Jan 22 at 11:04
Thomas KaminskiThomas Kaminski
111
add a comment |
I found a solution in this blog post
Install the keyutils package.
sudo apt-get install keyutils
Now I am able to mount the dfs share without a servername:
sudo mount -t cifs //mydfsdomain/namespaceroot/sharedfolder /mnt/sharedfolder -o credentials=/etc/cred.file
edited Jan 22 at 20:10
Zanna
50.7k13136241
answered Jan 22 at 11:04
Thomas KaminskiThomas Kaminski
111
add a comment |
I found a solution in this blog post
Install the keyutils package.
sudo apt-get install keyutils
Now I am able to mount the dfs share without a servername:
sudo mount -t cifs //mydfsdomain/namespaceroot/sharedfolder /mnt/sharedfolder -o credentials=/etc/cred.file
edited Jan 22 at 20:10
Zanna
50.7k13136241
answered Jan 22 at 11:04
Thomas KaminskiThomas Kaminski
111
I found a solution in this blog post
Install the keyutils package.
sudo apt-get install keyutils
Now I am able to mount the dfs share without a servername:
sudo mount -t cifs //mydfsdomain/namespaceroot/sharedfolder /mnt/sharedfolder -o credentials=/etc/cred.file
edited Jan 22 at 20:10
Zanna
50.7k13136241
answered Jan 22 at 11:04
Thomas KaminskiThomas Kaminski
111
edited Jan 22 at 20:10
Zanna
50.7k13136241
edited Jan 22 at 20:10
Zanna
50.7k13136241
edited Jan 22 at 20:10
Zanna
50.7k13136241
50.7k13136241
answered Jan 22 at 11:04
Thomas KaminskiThomas Kaminski
111
answered Jan 22 at 11:04
Thomas KaminskiThomas Kaminski
111
answered Jan 22 at 11:04
Thomas KaminskiThomas Kaminski
111
111
add a comment |
add a comment |
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1078645%2fhow-can-i-connect-to-a-dfs-share-on-a-windows-2016-server%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
