How to start Ubuntu in Console mode
I want to know if there is a way to switch to console mode from boot menu.
I've NVIDIA 1070 and every time there is an update, GUI stops working. All I need to do is re-install the drivers however to do that I need console.
[EDIT]: I should have added more information to this question but I'll comment on all answers. In short: I've tried text instead of quite splash I do see booting in text more however I don't get login screen ctrl+alt+f1 doesn't help because GDM keep trying to restart. Previously I managed to kill GDM through multiple tries but is not working since latest update
[EDIT]: After searching for runlevel, I've found Change runlevel on 16.04? but I think it required me to have running system to make changes, please correct me if I'm wrong.
16.04 nvidia
edited Apr 13 '17 at 12:24
Community♦
1
asked Dec 11 '16 at 22:45
wisemonkeywisemonkey
1,81852034
add a comment |
I want to know if there is a way to switch to console mode from boot menu.
I've NVIDIA 1070 and every time there is an update, GUI stops working. All I need to do is re-install the drivers however to do that I need console.
[EDIT]: I should have added more information to this question but I'll comment on all answers. In short: I've tried text instead of quite splash I do see booting in text more however I don't get login screen ctrl+alt+f1 doesn't help because GDM keep trying to restart. Previously I managed to kill GDM through multiple tries but is not working since latest update
[EDIT]: After searching for runlevel, I've found Change runlevel on 16.04? but I think it required me to have running system to make changes, please correct me if I'm wrong.
16.04 nvidia
edited Apr 13 '17 at 12:24
Community♦
1
asked Dec 11 '16 at 22:45
wisemonkeywisemonkey
1,81852034
6
Have you tried appending a3to the boot options (adding3toquiet splash)?
– muru
Dec 12 '16 at 2:26
I'll try that, so basically just changequiet splashtoquiet splash 3is that correct?
– wisemonkey
Dec 12 '16 at 5:47
Amazing thanks a lot, this is what I was looking for. I would like to know if I can somehow make NVidia (proprietary) drivers configure properly with every kernel update. But even if not this should help me. You can add it as an answer and I'll accept it.
– wisemonkey
Dec 12 '16 at 6:02
The most correct answer is here: superuser.com/a/1139020/403009
– Eric Wang
Mar 29 '18 at 19:15
add a comment |
I want to know if there is a way to switch to console mode from boot menu.
I've NVIDIA 1070 and every time there is an update, GUI stops working. All I need to do is re-install the drivers however to do that I need console.
[EDIT]: I should have added more information to this question but I'll comment on all answers. In short: I've tried text instead of quite splash I do see booting in text more however I don't get login screen ctrl+alt+f1 doesn't help because GDM keep trying to restart. Previously I managed to kill GDM through multiple tries but is not working since latest update
[EDIT]: After searching for runlevel, I've found Change runlevel on 16.04? but I think it required me to have running system to make changes, please correct me if I'm wrong.
16.04 nvidia
edited Apr 13 '17 at 12:24
Community♦
1
asked Dec 11 '16 at 22:45
wisemonkeywisemonkey
1,81852034
I want to know if there is a way to switch to console mode from boot menu.
I've NVIDIA 1070 and every time there is an update, GUI stops working. All I need to do is re-install the drivers however to do that I need console.
[EDIT]: I should have added more information to this question but I'll comment on all answers. In short: I've tried text instead of quite splash I do see booting in text more however I don't get login screen ctrl+alt+f1 doesn't help because GDM keep trying to restart. Previously I managed to kill GDM through multiple tries but is not working since latest update
[EDIT]: After searching for runlevel, I've found Change runlevel on 16.04? but I think it required me to have running system to make changes, please correct me if I'm wrong.
16.04 nvidia
16.04 nvidia
edited Apr 13 '17 at 12:24
Community♦
1
asked Dec 11 '16 at 22:45
wisemonkeywisemonkey
1,81852034
edited Apr 13 '17 at 12:24
Community♦
1
asked Dec 11 '16 at 22:45
wisemonkeywisemonkey
1,81852034
edited Apr 13 '17 at 12:24
Community♦
1
edited Apr 13 '17 at 12:24
Community♦
1
edited Apr 13 '17 at 12:24
Community♦
1
1
asked Dec 11 '16 at 22:45
wisemonkeywisemonkey
1,81852034
asked Dec 11 '16 at 22:45
wisemonkeywisemonkey
1,81852034
asked Dec 11 '16 at 22:45
wisemonkeywisemonkey
1,81852034
1,81852034
6
Have you tried appending a3to the boot options (adding3toquiet splash)?
– muru
Dec 12 '16 at 2:26
I'll try that, so basically just changequiet splashtoquiet splash 3is that correct?
– wisemonkey
Dec 12 '16 at 5:47
Amazing thanks a lot, this is what I was looking for. I would like to know if I can somehow make NVidia (proprietary) drivers configure properly with every kernel update. But even if not this should help me. You can add it as an answer and I'll accept it.
– wisemonkey
Dec 12 '16 at 6:02
The most correct answer is here: superuser.com/a/1139020/403009
– Eric Wang
Mar 29 '18 at 19:15
add a comment |
6
Have you tried appending a3to the boot options (adding3toquiet splash)?
– muru
Dec 12 '16 at 2:26
I'll try that, so basically just changequiet splashtoquiet splash 3is that correct?
– wisemonkey
Dec 12 '16 at 5:47
Amazing thanks a lot, this is what I was looking for. I would like to know if I can somehow make NVidia (proprietary) drivers configure properly with every kernel update. But even if not this should help me. You can add it as an answer and I'll accept it.
– wisemonkey
Dec 12 '16 at 6:02
The most correct answer is here: superuser.com/a/1139020/403009
– Eric Wang
Mar 29 '18 at 19:15
6
6
Have you tried appending a
3 to the boot options (adding 3 to quiet splash)?– muru
Dec 12 '16 at 2:26
Have you tried appending a
3 to the boot options (adding 3 to quiet splash)?– muru
Dec 12 '16 at 2:26
I'll try that, so basically just change
quiet splash to quiet splash 3 is that correct?– wisemonkey
Dec 12 '16 at 5:47
I'll try that, so basically just change
quiet splash to quiet splash 3 is that correct?– wisemonkey
Dec 12 '16 at 5:47
Amazing thanks a lot, this is what I was looking for. I would like to know if I can somehow make NVidia (proprietary) drivers configure properly with every kernel update. But even if not this should help me. You can add it as an answer and I'll accept it.
– wisemonkey
Dec 12 '16 at 6:02
Amazing thanks a lot, this is what I was looking for. I would like to know if I can somehow make NVidia (proprietary) drivers configure properly with every kernel update. But even if not this should help me. You can add it as an answer and I'll accept it.
– wisemonkey
Dec 12 '16 at 6:02
The most correct answer is here: superuser.com/a/1139020/403009
– Eric Wang
Mar 29 '18 at 19:15
The most correct answer is here: superuser.com/a/1139020/403009
– Eric Wang
Mar 29 '18 at 19:15
add a comment |
3 Answers
3
active
oldest
votes
Yes you can. As described here (ubuntuhandbook.org - Boot into text console ubuntu) you need to edit /etc/default/grub to have the next boot end up in text mode. In summary you will set these parameters:
GRUB_CMDLINE_LINUX_DEFAULT="text"
GRUB_TERMINAL=console
After saving changes you need to run:
sudo update-grub
sudo systemctl set-default multi-user.target
Undoing text-mode
To undo sudo systemctl set-default multi-user.target simply type
sudo systemctl set-default graphical.target
edited Sep 13 '18 at 9:47
abu_bua
3,27481026
answered Dec 11 '16 at 22:54
WinEunuuchs2UnixWinEunuuchs2Unix
44.7k1080169
Is there any way to show login to terminal by default (likeinit 3in old times), problem withctrl+alt+f1is that GDM keeps retrying to start and I don't get console.
– wisemonkey
Dec 12 '16 at 1:24
Did you try the grub method described in the answer?
– WinEunuuchs2Unix
Dec 12 '16 at 2:17
I can't login to system to edit/etc/default/grubthough.
– wisemonkey
Dec 12 '16 at 5:53
1
@wisemonkey I have updated the answer with manual updating of grub from Live DVD/USB.
– WinEunuuchs2Unix
Dec 12 '16 at 11:08
4
This does not seem to work on Ubuntu 15.04 and up (I tried 16.04 LTS). A crucial step after you fixed the grub file and run update-grub is to execute:sudo systemctl set-default multi-user.target- only then it started booting straight into console for me. Solution from @yury in the comments of the link you gave.
– f055
Sep 20 '17 at 14:41
|
show 2 more comments
Boot into recovery mode
Immediately after the BIOS/UEFI splash screen during boot, with BIOS, quickly press and hold the Shift key, which will bring up a GNU GRUB menu screen. With UEFI press (perhaps several times) the Esc key to get to the GNU GRUB menu screen. Sometimes the manufacturer's splash screen is a part of the Windows bootloader, so when you power up the machine it goes straight to the GNU GRUB menu screen, and then pressing Shift is unnecessary.
You will see a GNU GRUB menu screen that looks like this:
The timing when to press the left Shift key can be tricky, so sometimes if you miss it you need to try it again.
Press the down arrow key until you select the 2nd entry from the top (the one with the recovery mode in the description) and then press Enter twice.
Now you should see this menu:
Using the arrow keys scroll down to root (the second entry from the bottom in the Recovery Menu) and then press Enter.
You should now see a root prompt and you can run commands from it.
lightdm is called lightdm because it is a lightweight application compared to GDM which is heavy and takes longer to load. If you still have lightdm installed you can switch back to using lightdm as the default login display manager with the command: sudo dpkg-reconfigure gdm3. This will open up a new window allowing you to select either gdm3 or lightdm as the default login display manager.
Reboot the computer with the command sudo reboot
After that the keyboard shortcutCtrl+Alt+F3 may start to work properly, and allow you to start Ubuntu from the console.
Start Ubuntu from the console
Open a text-only virtual console by using the keyboard shortcut Ctrl+Alt+F3.
At the
login:prompt type your username and press Enter.At the
Password:prompt type your user password and press Enter.
Now you are logged in to a text-only console, and you can run terminal commands to reinstall the NVIDIA driver from the console. To reboot the system after you reinstall the NVIDIA driver run the command:
sudo reboot. Press the keyboard shortcut Ctrl+Alt+F7 to exit the virtual console. In Ubuntu 17.10 and later press the keyboard shortcut Ctrl+Alt+F2 to exit from the virtual console.
After you have logged in in the terminal type
sudo systemctl start graphical.targetand press Enter to bring up your default login screen, and then login to your Ubuntu desktop environment as usual.
answered Dec 11 '16 at 23:00
karelkarel
57.8k12128146
(Just copying previous comment): Is there any way to show login to terminal by default (likeinit 3in old times), problem withctrl+alt+f1is that GDM keeps retrying to start and I don't get console.
– wisemonkey
Dec 12 '16 at 1:26
I replied to your comment by editing my answer.
– karel
Dec 12 '16 at 2:07
Thanks Karel, but this assumes I can get system running somehow. Is that correct? Is there a way to issuesudo dpkg-reconfigure gdmwithout logging in?
– wisemonkey
Dec 12 '16 at 5:49
This does not waor anymoresudo dpkg-reconfigure gdm->package gdm is not installed(ubuntu 16.04). Andsudo dpkg-reconfigure lightdmdoes not do anything.
– Robert
Mar 30 '18 at 12:44
@Robert You are partially right. The reason why I referred to gdm is that gdm is mentioned in the question, therefore I was required to address it in my answer. However if you run the commandapt policy gdmin Ubuntu 16.04 you will see that gdm is indeed a package in the default Ubuntu 16.04 repositories.
– karel
Mar 30 '18 at 12:48
|
show 2 more comments
Press CTRL+ALT+F1 or any other function (F) key up to F7, which takes you back to your "GUI" terminal. These should drop you into a text-mode terminal for each different function key.
Otherwise you can boot into recovery mode if you need:
https://wiki.ubuntu.com/RecoveryMode
Basically hold down SHIFT as you boot up to get the Grub menu.
edited Dec 13 '16 at 1:22
Fabich
13716
answered Dec 11 '16 at 22:53
Kristopher IvesKristopher Ives
1,89011016
1
(copying previous comment): Is there any way to show login to terminal by default (like init 3 in old times), problem with ctrl+alt+f1 is that GDM keeps retrying to start and I don't get console. And for recovery mode its same results if I say clean start. I'll read up on other recovery modes and see if they are helpful
– wisemonkey
Dec 12 '16 at 1:26
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f859630%2fhow-to-start-ubuntu-in-console-mode%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
3 Answers
3
active
oldest
votes
3 Answers
3
active
oldest
votes
active
oldest
votes
active
oldest
votes
Yes you can. As described here (ubuntuhandbook.org - Boot into text console ubuntu) you need to edit /etc/default/grub to have the next boot end up in text mode. In summary you will set these parameters:
GRUB_CMDLINE_LINUX_DEFAULT="text"
GRUB_TERMINAL=console
After saving changes you need to run:
sudo update-grub
sudo systemctl set-default multi-user.target
Undoing text-mode
To undo sudo systemctl set-default multi-user.target simply type
sudo systemctl set-default graphical.target
edited Sep 13 '18 at 9:47
abu_bua
3,27481026
answered Dec 11 '16 at 22:54
WinEunuuchs2UnixWinEunuuchs2Unix
44.7k1080169
Is there any way to show login to terminal by default (likeinit 3in old times), problem withctrl+alt+f1is that GDM keeps retrying to start and I don't get console.
– wisemonkey
Dec 12 '16 at 1:24
Did you try the grub method described in the answer?
– WinEunuuchs2Unix
Dec 12 '16 at 2:17
I can't login to system to edit/etc/default/grubthough.
– wisemonkey
Dec 12 '16 at 5:53
1
@wisemonkey I have updated the answer with manual updating of grub from Live DVD/USB.
– WinEunuuchs2Unix
Dec 12 '16 at 11:08
4
This does not seem to work on Ubuntu 15.04 and up (I tried 16.04 LTS). A crucial step after you fixed the grub file and run update-grub is to execute:sudo systemctl set-default multi-user.target- only then it started booting straight into console for me. Solution from @yury in the comments of the link you gave.
– f055
Sep 20 '17 at 14:41
|
show 2 more comments
Yes you can. As described here (ubuntuhandbook.org - Boot into text console ubuntu) you need to edit /etc/default/grub to have the next boot end up in text mode. In summary you will set these parameters:
GRUB_CMDLINE_LINUX_DEFAULT="text"
GRUB_TERMINAL=console
After saving changes you need to run:
sudo update-grub
sudo systemctl set-default multi-user.target
Undoing text-mode
To undo sudo systemctl set-default multi-user.target simply type
sudo systemctl set-default graphical.target
edited Sep 13 '18 at 9:47
abu_bua
3,27481026
answered Dec 11 '16 at 22:54
WinEunuuchs2UnixWinEunuuchs2Unix
44.7k1080169
Is there any way to show login to terminal by default (likeinit 3in old times), problem withctrl+alt+f1is that GDM keeps retrying to start and I don't get console.
– wisemonkey
Dec 12 '16 at 1:24
Did you try the grub method described in the answer?
– WinEunuuchs2Unix
Dec 12 '16 at 2:17
I can't login to system to edit/etc/default/grubthough.
– wisemonkey
Dec 12 '16 at 5:53
1
@wisemonkey I have updated the answer with manual updating of grub from Live DVD/USB.
– WinEunuuchs2Unix
Dec 12 '16 at 11:08
4
This does not seem to work on Ubuntu 15.04 and up (I tried 16.04 LTS). A crucial step after you fixed the grub file and run update-grub is to execute:sudo systemctl set-default multi-user.target- only then it started booting straight into console for me. Solution from @yury in the comments of the link you gave.
– f055
Sep 20 '17 at 14:41
|
show 2 more comments
Yes you can. As described here (ubuntuhandbook.org - Boot into text console ubuntu) you need to edit /etc/default/grub to have the next boot end up in text mode. In summary you will set these parameters:
GRUB_CMDLINE_LINUX_DEFAULT="text"
GRUB_TERMINAL=console
After saving changes you need to run:
sudo update-grub
sudo systemctl set-default multi-user.target
Undoing text-mode
To undo sudo systemctl set-default multi-user.target simply type
sudo systemctl set-default graphical.target
edited Sep 13 '18 at 9:47
abu_bua
3,27481026
answered Dec 11 '16 at 22:54
WinEunuuchs2UnixWinEunuuchs2Unix
44.7k1080169
Yes you can. As described here (ubuntuhandbook.org - Boot into text console ubuntu) you need to edit /etc/default/grub to have the next boot end up in text mode. In summary you will set these parameters:
GRUB_CMDLINE_LINUX_DEFAULT="text"
GRUB_TERMINAL=console
After saving changes you need to run:
sudo update-grub
sudo systemctl set-default multi-user.target
Undoing text-mode
To undo sudo systemctl set-default multi-user.target simply type
sudo systemctl set-default graphical.target
edited Sep 13 '18 at 9:47
abu_bua
3,27481026
answered Dec 11 '16 at 22:54
WinEunuuchs2UnixWinEunuuchs2Unix
44.7k1080169
edited Sep 13 '18 at 9:47
abu_bua
3,27481026
edited Sep 13 '18 at 9:47
abu_bua
3,27481026
edited Sep 13 '18 at 9:47
abu_bua
3,27481026
3,27481026
answered Dec 11 '16 at 22:54
WinEunuuchs2UnixWinEunuuchs2Unix
44.7k1080169
answered Dec 11 '16 at 22:54
WinEunuuchs2UnixWinEunuuchs2Unix
44.7k1080169
answered Dec 11 '16 at 22:54
WinEunuuchs2UnixWinEunuuchs2Unix
44.7k1080169
44.7k1080169
Is there any way to show login to terminal by default (likeinit 3in old times), problem withctrl+alt+f1is that GDM keeps retrying to start and I don't get console.
– wisemonkey
Dec 12 '16 at 1:24
Did you try the grub method described in the answer?
– WinEunuuchs2Unix
Dec 12 '16 at 2:17
I can't login to system to edit/etc/default/grubthough.
– wisemonkey
Dec 12 '16 at 5:53
1
@wisemonkey I have updated the answer with manual updating of grub from Live DVD/USB.
– WinEunuuchs2Unix
Dec 12 '16 at 11:08
4
This does not seem to work on Ubuntu 15.04 and up (I tried 16.04 LTS). A crucial step after you fixed the grub file and run update-grub is to execute:sudo systemctl set-default multi-user.target- only then it started booting straight into console for me. Solution from @yury in the comments of the link you gave.
– f055
Sep 20 '17 at 14:41
|
show 2 more comments
Is there any way to show login to terminal by default (likeinit 3in old times), problem withctrl+alt+f1is that GDM keeps retrying to start and I don't get console.
– wisemonkey
Dec 12 '16 at 1:24
Did you try the grub method described in the answer?
– WinEunuuchs2Unix
Dec 12 '16 at 2:17
I can't login to system to edit/etc/default/grubthough.
– wisemonkey
Dec 12 '16 at 5:53
1
@wisemonkey I have updated the answer with manual updating of grub from Live DVD/USB.
– WinEunuuchs2Unix
Dec 12 '16 at 11:08
4
This does not seem to work on Ubuntu 15.04 and up (I tried 16.04 LTS). A crucial step after you fixed the grub file and run update-grub is to execute:sudo systemctl set-default multi-user.target- only then it started booting straight into console for me. Solution from @yury in the comments of the link you gave.
– f055
Sep 20 '17 at 14:41
Is there any way to show login to terminal by default (like
init 3 in old times), problem with ctrl+alt+f1 is that GDM keeps retrying to start and I don't get console.– wisemonkey
Dec 12 '16 at 1:24
Is there any way to show login to terminal by default (like
init 3 in old times), problem with ctrl+alt+f1 is that GDM keeps retrying to start and I don't get console.– wisemonkey
Dec 12 '16 at 1:24
Did you try the grub method described in the answer?
– WinEunuuchs2Unix
Dec 12 '16 at 2:17
Did you try the grub method described in the answer?
– WinEunuuchs2Unix
Dec 12 '16 at 2:17
I can't login to system to edit
/etc/default/grub though.– wisemonkey
Dec 12 '16 at 5:53
I can't login to system to edit
/etc/default/grub though.– wisemonkey
Dec 12 '16 at 5:53
1
1
@wisemonkey I have updated the answer with manual updating of grub from Live DVD/USB.
– WinEunuuchs2Unix
Dec 12 '16 at 11:08
@wisemonkey I have updated the answer with manual updating of grub from Live DVD/USB.
– WinEunuuchs2Unix
Dec 12 '16 at 11:08
4
4
This does not seem to work on Ubuntu 15.04 and up (I tried 16.04 LTS). A crucial step after you fixed the grub file and run update-grub is to execute:
sudo systemctl set-default multi-user.target - only then it started booting straight into console for me. Solution from @yury in the comments of the link you gave.– f055
Sep 20 '17 at 14:41
This does not seem to work on Ubuntu 15.04 and up (I tried 16.04 LTS). A crucial step after you fixed the grub file and run update-grub is to execute:
sudo systemctl set-default multi-user.target - only then it started booting straight into console for me. Solution from @yury in the comments of the link you gave.– f055
Sep 20 '17 at 14:41
|
show 2 more comments
Boot into recovery mode
Immediately after the BIOS/UEFI splash screen during boot, with BIOS, quickly press and hold the Shift key, which will bring up a GNU GRUB menu screen. With UEFI press (perhaps several times) the Esc key to get to the GNU GRUB menu screen. Sometimes the manufacturer's splash screen is a part of the Windows bootloader, so when you power up the machine it goes straight to the GNU GRUB menu screen, and then pressing Shift is unnecessary.
You will see a GNU GRUB menu screen that looks like this:
The timing when to press the left Shift key can be tricky, so sometimes if you miss it you need to try it again.
Press the down arrow key until you select the 2nd entry from the top (the one with the recovery mode in the description) and then press Enter twice.
Now you should see this menu:
Using the arrow keys scroll down to root (the second entry from the bottom in the Recovery Menu) and then press Enter.
You should now see a root prompt and you can run commands from it.
lightdm is called lightdm because it is a lightweight application compared to GDM which is heavy and takes longer to load. If you still have lightdm installed you can switch back to using lightdm as the default login display manager with the command: sudo dpkg-reconfigure gdm3. This will open up a new window allowing you to select either gdm3 or lightdm as the default login display manager.
Reboot the computer with the command sudo reboot
After that the keyboard shortcutCtrl+Alt+F3 may start to work properly, and allow you to start Ubuntu from the console.
Start Ubuntu from the console
Open a text-only virtual console by using the keyboard shortcut Ctrl+Alt+F3.
At the
login:prompt type your username and press Enter.At the
Password:prompt type your user password and press Enter.
Now you are logged in to a text-only console, and you can run terminal commands to reinstall the NVIDIA driver from the console. To reboot the system after you reinstall the NVIDIA driver run the command:
sudo reboot. Press the keyboard shortcut Ctrl+Alt+F7 to exit the virtual console. In Ubuntu 17.10 and later press the keyboard shortcut Ctrl+Alt+F2 to exit from the virtual console.
After you have logged in in the terminal type
sudo systemctl start graphical.targetand press Enter to bring up your default login screen, and then login to your Ubuntu desktop environment as usual.
answered Dec 11 '16 at 23:00
karelkarel
57.8k12128146
(Just copying previous comment): Is there any way to show login to terminal by default (likeinit 3in old times), problem withctrl+alt+f1is that GDM keeps retrying to start and I don't get console.
– wisemonkey
Dec 12 '16 at 1:26
I replied to your comment by editing my answer.
– karel
Dec 12 '16 at 2:07
Thanks Karel, but this assumes I can get system running somehow. Is that correct? Is there a way to issuesudo dpkg-reconfigure gdmwithout logging in?
– wisemonkey
Dec 12 '16 at 5:49
This does not waor anymoresudo dpkg-reconfigure gdm->package gdm is not installed(ubuntu 16.04). Andsudo dpkg-reconfigure lightdmdoes not do anything.
– Robert
Mar 30 '18 at 12:44
@Robert You are partially right. The reason why I referred to gdm is that gdm is mentioned in the question, therefore I was required to address it in my answer. However if you run the commandapt policy gdmin Ubuntu 16.04 you will see that gdm is indeed a package in the default Ubuntu 16.04 repositories.
– karel
Mar 30 '18 at 12:48
|
show 2 more comments
Boot into recovery mode
Immediately after the BIOS/UEFI splash screen during boot, with BIOS, quickly press and hold the Shift key, which will bring up a GNU GRUB menu screen. With UEFI press (perhaps several times) the Esc key to get to the GNU GRUB menu screen. Sometimes the manufacturer's splash screen is a part of the Windows bootloader, so when you power up the machine it goes straight to the GNU GRUB menu screen, and then pressing Shift is unnecessary.
You will see a GNU GRUB menu screen that looks like this:
The timing when to press the left Shift key can be tricky, so sometimes if you miss it you need to try it again.
Press the down arrow key until you select the 2nd entry from the top (the one with the recovery mode in the description) and then press Enter twice.
Now you should see this menu:
Using the arrow keys scroll down to root (the second entry from the bottom in the Recovery Menu) and then press Enter.
You should now see a root prompt and you can run commands from it.
lightdm is called lightdm because it is a lightweight application compared to GDM which is heavy and takes longer to load. If you still have lightdm installed you can switch back to using lightdm as the default login display manager with the command: sudo dpkg-reconfigure gdm3. This will open up a new window allowing you to select either gdm3 or lightdm as the default login display manager.
Reboot the computer with the command sudo reboot
After that the keyboard shortcutCtrl+Alt+F3 may start to work properly, and allow you to start Ubuntu from the console.
Start Ubuntu from the console
Open a text-only virtual console by using the keyboard shortcut Ctrl+Alt+F3.
At the
login:prompt type your username and press Enter.At the
Password:prompt type your user password and press Enter.
Now you are logged in to a text-only console, and you can run terminal commands to reinstall the NVIDIA driver from the console. To reboot the system after you reinstall the NVIDIA driver run the command:
sudo reboot. Press the keyboard shortcut Ctrl+Alt+F7 to exit the virtual console. In Ubuntu 17.10 and later press the keyboard shortcut Ctrl+Alt+F2 to exit from the virtual console.
After you have logged in in the terminal type
sudo systemctl start graphical.targetand press Enter to bring up your default login screen, and then login to your Ubuntu desktop environment as usual.
answered Dec 11 '16 at 23:00
karelkarel
57.8k12128146
(Just copying previous comment): Is there any way to show login to terminal by default (likeinit 3in old times), problem withctrl+alt+f1is that GDM keeps retrying to start and I don't get console.
– wisemonkey
Dec 12 '16 at 1:26
I replied to your comment by editing my answer.
– karel
Dec 12 '16 at 2:07
Thanks Karel, but this assumes I can get system running somehow. Is that correct? Is there a way to issuesudo dpkg-reconfigure gdmwithout logging in?
– wisemonkey
Dec 12 '16 at 5:49
This does not waor anymoresudo dpkg-reconfigure gdm->package gdm is not installed(ubuntu 16.04). Andsudo dpkg-reconfigure lightdmdoes not do anything.
– Robert
Mar 30 '18 at 12:44
@Robert You are partially right. The reason why I referred to gdm is that gdm is mentioned in the question, therefore I was required to address it in my answer. However if you run the commandapt policy gdmin Ubuntu 16.04 you will see that gdm is indeed a package in the default Ubuntu 16.04 repositories.
– karel
Mar 30 '18 at 12:48
|
show 2 more comments
Boot into recovery mode
Immediately after the BIOS/UEFI splash screen during boot, with BIOS, quickly press and hold the Shift key, which will bring up a GNU GRUB menu screen. With UEFI press (perhaps several times) the Esc key to get to the GNU GRUB menu screen. Sometimes the manufacturer's splash screen is a part of the Windows bootloader, so when you power up the machine it goes straight to the GNU GRUB menu screen, and then pressing Shift is unnecessary.
You will see a GNU GRUB menu screen that looks like this:
The timing when to press the left Shift key can be tricky, so sometimes if you miss it you need to try it again.
Press the down arrow key until you select the 2nd entry from the top (the one with the recovery mode in the description) and then press Enter twice.
Now you should see this menu:
Using the arrow keys scroll down to root (the second entry from the bottom in the Recovery Menu) and then press Enter.
You should now see a root prompt and you can run commands from it.
lightdm is called lightdm because it is a lightweight application compared to GDM which is heavy and takes longer to load. If you still have lightdm installed you can switch back to using lightdm as the default login display manager with the command: sudo dpkg-reconfigure gdm3. This will open up a new window allowing you to select either gdm3 or lightdm as the default login display manager.
Reboot the computer with the command sudo reboot
After that the keyboard shortcutCtrl+Alt+F3 may start to work properly, and allow you to start Ubuntu from the console.
Start Ubuntu from the console
Open a text-only virtual console by using the keyboard shortcut Ctrl+Alt+F3.
At the
login:prompt type your username and press Enter.At the
Password:prompt type your user password and press Enter.
Now you are logged in to a text-only console, and you can run terminal commands to reinstall the NVIDIA driver from the console. To reboot the system after you reinstall the NVIDIA driver run the command:
sudo reboot. Press the keyboard shortcut Ctrl+Alt+F7 to exit the virtual console. In Ubuntu 17.10 and later press the keyboard shortcut Ctrl+Alt+F2 to exit from the virtual console.
After you have logged in in the terminal type
sudo systemctl start graphical.targetand press Enter to bring up your default login screen, and then login to your Ubuntu desktop environment as usual.
answered Dec 11 '16 at 23:00
karelkarel
57.8k12128146
Boot into recovery mode
Immediately after the BIOS/UEFI splash screen during boot, with BIOS, quickly press and hold the Shift key, which will bring up a GNU GRUB menu screen. With UEFI press (perhaps several times) the Esc key to get to the GNU GRUB menu screen. Sometimes the manufacturer's splash screen is a part of the Windows bootloader, so when you power up the machine it goes straight to the GNU GRUB menu screen, and then pressing Shift is unnecessary.
You will see a GNU GRUB menu screen that looks like this:
The timing when to press the left Shift key can be tricky, so sometimes if you miss it you need to try it again.
Press the down arrow key until you select the 2nd entry from the top (the one with the recovery mode in the description) and then press Enter twice.
Now you should see this menu:
Using the arrow keys scroll down to root (the second entry from the bottom in the Recovery Menu) and then press Enter.
You should now see a root prompt and you can run commands from it.
lightdm is called lightdm because it is a lightweight application compared to GDM which is heavy and takes longer to load. If you still have lightdm installed you can switch back to using lightdm as the default login display manager with the command: sudo dpkg-reconfigure gdm3. This will open up a new window allowing you to select either gdm3 or lightdm as the default login display manager.
Reboot the computer with the command sudo reboot
After that the keyboard shortcutCtrl+Alt+F3 may start to work properly, and allow you to start Ubuntu from the console.
Start Ubuntu from the console
Open a text-only virtual console by using the keyboard shortcut Ctrl+Alt+F3.
At the
login:prompt type your username and press Enter.At the
Password:prompt type your user password and press Enter.
Now you are logged in to a text-only console, and you can run terminal commands to reinstall the NVIDIA driver from the console. To reboot the system after you reinstall the NVIDIA driver run the command:
sudo reboot. Press the keyboard shortcut Ctrl+Alt+F7 to exit the virtual console. In Ubuntu 17.10 and later press the keyboard shortcut Ctrl+Alt+F2 to exit from the virtual console.
After you have logged in in the terminal type
sudo systemctl start graphical.targetand press Enter to bring up your default login screen, and then login to your Ubuntu desktop environment as usual.
answered Dec 11 '16 at 23:00
karelkarel
57.8k12128146
edited Jan 4 at 11:25
answered Dec 11 '16 at 23:00
karelkarel
57.8k12128146
answered Dec 11 '16 at 23:00
karelkarel
57.8k12128146
answered Dec 11 '16 at 23:00
karelkarel
57.8k12128146
57.8k12128146
(Just copying previous comment): Is there any way to show login to terminal by default (likeinit 3in old times), problem withctrl+alt+f1is that GDM keeps retrying to start and I don't get console.
– wisemonkey
Dec 12 '16 at 1:26
I replied to your comment by editing my answer.
– karel
Dec 12 '16 at 2:07
Thanks Karel, but this assumes I can get system running somehow. Is that correct? Is there a way to issuesudo dpkg-reconfigure gdmwithout logging in?
– wisemonkey
Dec 12 '16 at 5:49
This does not waor anymoresudo dpkg-reconfigure gdm->package gdm is not installed(ubuntu 16.04). Andsudo dpkg-reconfigure lightdmdoes not do anything.
– Robert
Mar 30 '18 at 12:44
@Robert You are partially right. The reason why I referred to gdm is that gdm is mentioned in the question, therefore I was required to address it in my answer. However if you run the commandapt policy gdmin Ubuntu 16.04 you will see that gdm is indeed a package in the default Ubuntu 16.04 repositories.
– karel
Mar 30 '18 at 12:48
|
show 2 more comments
(Just copying previous comment): Is there any way to show login to terminal by default (likeinit 3in old times), problem withctrl+alt+f1is that GDM keeps retrying to start and I don't get console.
– wisemonkey
Dec 12 '16 at 1:26
I replied to your comment by editing my answer.
– karel
Dec 12 '16 at 2:07
Thanks Karel, but this assumes I can get system running somehow. Is that correct? Is there a way to issuesudo dpkg-reconfigure gdmwithout logging in?
– wisemonkey
Dec 12 '16 at 5:49
This does not waor anymoresudo dpkg-reconfigure gdm->package gdm is not installed(ubuntu 16.04). Andsudo dpkg-reconfigure lightdmdoes not do anything.
– Robert
Mar 30 '18 at 12:44
@Robert You are partially right. The reason why I referred to gdm is that gdm is mentioned in the question, therefore I was required to address it in my answer. However if you run the commandapt policy gdmin Ubuntu 16.04 you will see that gdm is indeed a package in the default Ubuntu 16.04 repositories.
– karel
Mar 30 '18 at 12:48
(Just copying previous comment): Is there any way to show login to terminal by default (like
init 3 in old times), problem with ctrl+alt+f1 is that GDM keeps retrying to start and I don't get console.– wisemonkey
Dec 12 '16 at 1:26
(Just copying previous comment): Is there any way to show login to terminal by default (like
init 3 in old times), problem with ctrl+alt+f1 is that GDM keeps retrying to start and I don't get console.– wisemonkey
Dec 12 '16 at 1:26
I replied to your comment by editing my answer.
– karel
Dec 12 '16 at 2:07
I replied to your comment by editing my answer.
– karel
Dec 12 '16 at 2:07
Thanks Karel, but this assumes I can get system running somehow. Is that correct? Is there a way to issue
sudo dpkg-reconfigure gdm without logging in?– wisemonkey
Dec 12 '16 at 5:49
Thanks Karel, but this assumes I can get system running somehow. Is that correct? Is there a way to issue
sudo dpkg-reconfigure gdm without logging in?– wisemonkey
Dec 12 '16 at 5:49
This does not waor anymore
sudo dpkg-reconfigure gdm-> package gdm is not installed(ubuntu 16.04). And sudo dpkg-reconfigure lightdm does not do anything.– Robert
Mar 30 '18 at 12:44
This does not waor anymore
sudo dpkg-reconfigure gdm-> package gdm is not installed(ubuntu 16.04). And sudo dpkg-reconfigure lightdm does not do anything.– Robert
Mar 30 '18 at 12:44
@Robert You are partially right. The reason why I referred to gdm is that gdm is mentioned in the question, therefore I was required to address it in my answer. However if you run the command
apt policy gdm in Ubuntu 16.04 you will see that gdm is indeed a package in the default Ubuntu 16.04 repositories.– karel
Mar 30 '18 at 12:48
@Robert You are partially right. The reason why I referred to gdm is that gdm is mentioned in the question, therefore I was required to address it in my answer. However if you run the command
apt policy gdm in Ubuntu 16.04 you will see that gdm is indeed a package in the default Ubuntu 16.04 repositories.– karel
Mar 30 '18 at 12:48
|
show 2 more comments
Press CTRL+ALT+F1 or any other function (F) key up to F7, which takes you back to your "GUI" terminal. These should drop you into a text-mode terminal for each different function key.
Otherwise you can boot into recovery mode if you need:
https://wiki.ubuntu.com/RecoveryMode
Basically hold down SHIFT as you boot up to get the Grub menu.
edited Dec 13 '16 at 1:22
Fabich
13716
answered Dec 11 '16 at 22:53
Kristopher IvesKristopher Ives
1,89011016
1
(copying previous comment): Is there any way to show login to terminal by default (like init 3 in old times), problem with ctrl+alt+f1 is that GDM keeps retrying to start and I don't get console. And for recovery mode its same results if I say clean start. I'll read up on other recovery modes and see if they are helpful
– wisemonkey
Dec 12 '16 at 1:26
add a comment |
Press CTRL+ALT+F1 or any other function (F) key up to F7, which takes you back to your "GUI" terminal. These should drop you into a text-mode terminal for each different function key.
Otherwise you can boot into recovery mode if you need:
https://wiki.ubuntu.com/RecoveryMode
Basically hold down SHIFT as you boot up to get the Grub menu.
edited Dec 13 '16 at 1:22
Fabich
13716
answered Dec 11 '16 at 22:53
Kristopher IvesKristopher Ives
1,89011016
1
(copying previous comment): Is there any way to show login to terminal by default (like init 3 in old times), problem with ctrl+alt+f1 is that GDM keeps retrying to start and I don't get console. And for recovery mode its same results if I say clean start. I'll read up on other recovery modes and see if they are helpful
– wisemonkey
Dec 12 '16 at 1:26
add a comment |
Press CTRL+ALT+F1 or any other function (F) key up to F7, which takes you back to your "GUI" terminal. These should drop you into a text-mode terminal for each different function key.
Otherwise you can boot into recovery mode if you need:
https://wiki.ubuntu.com/RecoveryMode
Basically hold down SHIFT as you boot up to get the Grub menu.
edited Dec 13 '16 at 1:22
Fabich
13716
answered Dec 11 '16 at 22:53
Kristopher IvesKristopher Ives
1,89011016
Press CTRL+ALT+F1 or any other function (F) key up to F7, which takes you back to your "GUI" terminal. These should drop you into a text-mode terminal for each different function key.
Otherwise you can boot into recovery mode if you need:
https://wiki.ubuntu.com/RecoveryMode
Basically hold down SHIFT as you boot up to get the Grub menu.
edited Dec 13 '16 at 1:22
Fabich
13716
answered Dec 11 '16 at 22:53
Kristopher IvesKristopher Ives
1,89011016
edited Dec 13 '16 at 1:22
Fabich
13716
edited Dec 13 '16 at 1:22
Fabich
13716
edited Dec 13 '16 at 1:22
Fabich
13716
13716
answered Dec 11 '16 at 22:53
Kristopher IvesKristopher Ives
1,89011016
answered Dec 11 '16 at 22:53
Kristopher IvesKristopher Ives
1,89011016
answered Dec 11 '16 at 22:53
Kristopher IvesKristopher Ives
1,89011016
1,89011016
1
(copying previous comment): Is there any way to show login to terminal by default (like init 3 in old times), problem with ctrl+alt+f1 is that GDM keeps retrying to start and I don't get console. And for recovery mode its same results if I say clean start. I'll read up on other recovery modes and see if they are helpful
– wisemonkey
Dec 12 '16 at 1:26
add a comment |
1
(copying previous comment): Is there any way to show login to terminal by default (like init 3 in old times), problem with ctrl+alt+f1 is that GDM keeps retrying to start and I don't get console. And for recovery mode its same results if I say clean start. I'll read up on other recovery modes and see if they are helpful
– wisemonkey
Dec 12 '16 at 1:26
1
1
(copying previous comment): Is there any way to show login to terminal by default (like init 3 in old times), problem with ctrl+alt+f1 is that GDM keeps retrying to start and I don't get console. And for recovery mode its same results if I say clean start. I'll read up on other recovery modes and see if they are helpful
– wisemonkey
Dec 12 '16 at 1:26
(copying previous comment): Is there any way to show login to terminal by default (like init 3 in old times), problem with ctrl+alt+f1 is that GDM keeps retrying to start and I don't get console. And for recovery mode its same results if I say clean start. I'll read up on other recovery modes and see if they are helpful
– wisemonkey
Dec 12 '16 at 1:26
add a comment |
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f859630%2fhow-to-start-ubuntu-in-console-mode%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
6
Have you tried appending a
3to the boot options (adding3toquiet splash)?– muru
Dec 12 '16 at 2:26
I'll try that, so basically just change
quiet splashtoquiet splash 3is that correct?– wisemonkey
Dec 12 '16 at 5:47
Amazing thanks a lot, this is what I was looking for. I would like to know if I can somehow make NVidia (proprietary) drivers configure properly with every kernel update. But even if not this should help me. You can add it as an answer and I'll accept it.
– wisemonkey
Dec 12 '16 at 6:02
The most correct answer is here: superuser.com/a/1139020/403009
– Eric Wang
Mar 29 '18 at 19:15