Tikz - Overlapping arrows make them too big
3
I'm pretty new to Tikz and I'm facing a little issue.
I'd like to draw arrows that are overlapping, all going in same directions, but it's getting wider and wider and is pretty horrible. How could I face it ? Here is the code :
documentclass{article}
usepackage[utf8]{inputenc}
usepackage{tikz}
usetikzlibrary{shapes.geometric, arrows, calc}
begin{document}
begin{tikzpicture}[node distance=2.3cm]
% Style
tikzstyle{cell} = [rectangle, minimum width=1.5cm, minimum height=1.5cm, text centered, draw=black, fill=green!20]
tikzstyle{tensor} = [circle, minimum width=1cm, text centered, draw=black, fill=green!10]
tikzstyle{arrow} = [thick,->,>=stealth]
% Nodes
node (he) [tensor] {$h^e$};
node (d1) [cell, right of=he, below of=he, xshift=1.5cm, yshift=-2cm] {$d$};
node (d2) [cell, right of=d1, xshift=1.5cm] {$d$};
node (dn) [cell, right of=d2, xshift=2cm] {$d$};
node (w1) [tensor, above of=d1, left of=d1, minimum width=1.25cm] {$w_1$};
node (w2) [tensor, above of=d2, left of=d2, minimum width=1.25cm] {$w_2$};
node (wn) [tensor, above of=dn, left of=dn, minimum width=1.25cm] {$w_n$};
% Arrows
draw[arrow] (w1) -| (d1);
draw[arrow] (w2) -| (d2);
draw[arrow] (wn) -| (dn);
draw[arrow] (d1) -- (d2);
draw[arrow] (he) |- (d1);
draw[arrow] (he) -| (d1);
draw[arrow] (he) -| (d2);
draw[arrow] (he) -| (dn);
end{tikzpicture}
end{document}
If you render the figure, you'll see arrows getting darker, how can I fix it ?
Thanks,
Cheers
tikz-arrows
edited Jan 23 at 10:35
samcarter
1
asked Jan 23 at 10:25
RicocotamRicocotam
183
|
show 1 more comment
3
I'm pretty new to Tikz and I'm facing a little issue.
I'd like to draw arrows that are overlapping, all going in same directions, but it's getting wider and wider and is pretty horrible. How could I face it ? Here is the code :
documentclass{article}
usepackage[utf8]{inputenc}
usepackage{tikz}
usetikzlibrary{shapes.geometric, arrows, calc}
begin{document}
begin{tikzpicture}[node distance=2.3cm]
% Style
tikzstyle{cell} = [rectangle, minimum width=1.5cm, minimum height=1.5cm, text centered, draw=black, fill=green!20]
tikzstyle{tensor} = [circle, minimum width=1cm, text centered, draw=black, fill=green!10]
tikzstyle{arrow} = [thick,->,>=stealth]
% Nodes
node (he) [tensor] {$h^e$};
node (d1) [cell, right of=he, below of=he, xshift=1.5cm, yshift=-2cm] {$d$};
node (d2) [cell, right of=d1, xshift=1.5cm] {$d$};
node (dn) [cell, right of=d2, xshift=2cm] {$d$};
node (w1) [tensor, above of=d1, left of=d1, minimum width=1.25cm] {$w_1$};
node (w2) [tensor, above of=d2, left of=d2, minimum width=1.25cm] {$w_2$};
node (wn) [tensor, above of=dn, left of=dn, minimum width=1.25cm] {$w_n$};
% Arrows
draw[arrow] (w1) -| (d1);
draw[arrow] (w2) -| (d2);
draw[arrow] (wn) -| (dn);
draw[arrow] (d1) -- (d2);
draw[arrow] (he) |- (d1);
draw[arrow] (he) -| (d1);
draw[arrow] (he) -| (d2);
draw[arrow] (he) -| (dn);
end{tikzpicture}
end{document}
If you render the figure, you'll see arrows getting darker, how can I fix it ?
Thanks,
Cheers
tikz-arrows
edited Jan 23 at 10:35
samcarter
1
asked Jan 23 at 10:25
RicocotamRicocotam
183
Welcome to TeX.Stackexchange! Can you make your example compilable? When I try to run your code I get errors. I can debug them, but how would I know if this still reproduces the problem you are asking about?
– samcarter
Jan 23 at 10:26
Actually, as I know, if two lines overlapping each other in TikZ, they are darkened.
– JouleV
Jan 23 at 10:28
@samcarter I fixed it, bad copy/paster my bad
– Ricocotam
Jan 23 at 10:34
@joulev That's exactly my problem, I don't want arrows being darkened
– Ricocotam
Jan 23 at 10:35
1
Have you tried to print it? There are often aliasing problems with PDF viewers, and the line can seems darker or not depending on the zoom level.
– Rmano
Jan 23 at 10:45
|
show 1 more comment
3
3
3
1
I'm pretty new to Tikz and I'm facing a little issue.
I'd like to draw arrows that are overlapping, all going in same directions, but it's getting wider and wider and is pretty horrible. How could I face it ? Here is the code :
documentclass{article}
usepackage[utf8]{inputenc}
usepackage{tikz}
usetikzlibrary{shapes.geometric, arrows, calc}
begin{document}
begin{tikzpicture}[node distance=2.3cm]
% Style
tikzstyle{cell} = [rectangle, minimum width=1.5cm, minimum height=1.5cm, text centered, draw=black, fill=green!20]
tikzstyle{tensor} = [circle, minimum width=1cm, text centered, draw=black, fill=green!10]
tikzstyle{arrow} = [thick,->,>=stealth]
% Nodes
node (he) [tensor] {$h^e$};
node (d1) [cell, right of=he, below of=he, xshift=1.5cm, yshift=-2cm] {$d$};
node (d2) [cell, right of=d1, xshift=1.5cm] {$d$};
node (dn) [cell, right of=d2, xshift=2cm] {$d$};
node (w1) [tensor, above of=d1, left of=d1, minimum width=1.25cm] {$w_1$};
node (w2) [tensor, above of=d2, left of=d2, minimum width=1.25cm] {$w_2$};
node (wn) [tensor, above of=dn, left of=dn, minimum width=1.25cm] {$w_n$};
% Arrows
draw[arrow] (w1) -| (d1);
draw[arrow] (w2) -| (d2);
draw[arrow] (wn) -| (dn);
draw[arrow] (d1) -- (d2);
draw[arrow] (he) |- (d1);
draw[arrow] (he) -| (d1);
draw[arrow] (he) -| (d2);
draw[arrow] (he) -| (dn);
end{tikzpicture}
end{document}
If you render the figure, you'll see arrows getting darker, how can I fix it ?
Thanks,
Cheers
tikz-arrows
edited Jan 23 at 10:35
samcarter
1
asked Jan 23 at 10:25
RicocotamRicocotam
183
I'm pretty new to Tikz and I'm facing a little issue.
I'd like to draw arrows that are overlapping, all going in same directions, but it's getting wider and wider and is pretty horrible. How could I face it ? Here is the code :
documentclass{article}
usepackage[utf8]{inputenc}
usepackage{tikz}
usetikzlibrary{shapes.geometric, arrows, calc}
begin{document}
begin{tikzpicture}[node distance=2.3cm]
% Style
tikzstyle{cell} = [rectangle, minimum width=1.5cm, minimum height=1.5cm, text centered, draw=black, fill=green!20]
tikzstyle{tensor} = [circle, minimum width=1cm, text centered, draw=black, fill=green!10]
tikzstyle{arrow} = [thick,->,>=stealth]
% Nodes
node (he) [tensor] {$h^e$};
node (d1) [cell, right of=he, below of=he, xshift=1.5cm, yshift=-2cm] {$d$};
node (d2) [cell, right of=d1, xshift=1.5cm] {$d$};
node (dn) [cell, right of=d2, xshift=2cm] {$d$};
node (w1) [tensor, above of=d1, left of=d1, minimum width=1.25cm] {$w_1$};
node (w2) [tensor, above of=d2, left of=d2, minimum width=1.25cm] {$w_2$};
node (wn) [tensor, above of=dn, left of=dn, minimum width=1.25cm] {$w_n$};
% Arrows
draw[arrow] (w1) -| (d1);
draw[arrow] (w2) -| (d2);
draw[arrow] (wn) -| (dn);
draw[arrow] (d1) -- (d2);
draw[arrow] (he) |- (d1);
draw[arrow] (he) -| (d1);
draw[arrow] (he) -| (d2);
draw[arrow] (he) -| (dn);
end{tikzpicture}
end{document}
If you render the figure, you'll see arrows getting darker, how can I fix it ?
Thanks,
Cheers
tikz-arrows
tikz-arrows
edited Jan 23 at 10:35
samcarter
1
asked Jan 23 at 10:25
RicocotamRicocotam
183
edited Jan 23 at 10:35
samcarter
1
asked Jan 23 at 10:25
RicocotamRicocotam
183
edited Jan 23 at 10:35
samcarter
1
edited Jan 23 at 10:35
samcarter
1
edited Jan 23 at 10:35
samcarter
1
1
asked Jan 23 at 10:25
RicocotamRicocotam
183
asked Jan 23 at 10:25
RicocotamRicocotam
183
asked Jan 23 at 10:25
RicocotamRicocotam
183
183
Welcome to TeX.Stackexchange! Can you make your example compilable? When I try to run your code I get errors. I can debug them, but how would I know if this still reproduces the problem you are asking about?
– samcarter
Jan 23 at 10:26
Actually, as I know, if two lines overlapping each other in TikZ, they are darkened.
– JouleV
Jan 23 at 10:28
@samcarter I fixed it, bad copy/paster my bad
– Ricocotam
Jan 23 at 10:34
@joulev That's exactly my problem, I don't want arrows being darkened
– Ricocotam
Jan 23 at 10:35
1
Have you tried to print it? There are often aliasing problems with PDF viewers, and the line can seems darker or not depending on the zoom level.
– Rmano
Jan 23 at 10:45
|
show 1 more comment
Welcome to TeX.Stackexchange! Can you make your example compilable? When I try to run your code I get errors. I can debug them, but how would I know if this still reproduces the problem you are asking about?
– samcarter
Jan 23 at 10:26
Actually, as I know, if two lines overlapping each other in TikZ, they are darkened.
– JouleV
Jan 23 at 10:28
@samcarter I fixed it, bad copy/paster my bad
– Ricocotam
Jan 23 at 10:34
@joulev That's exactly my problem, I don't want arrows being darkened
– Ricocotam
Jan 23 at 10:35
1
Have you tried to print it? There are often aliasing problems with PDF viewers, and the line can seems darker or not depending on the zoom level.
– Rmano
Jan 23 at 10:45
Welcome to TeX.Stackexchange! Can you make your example compilable? When I try to run your code I get errors. I can debug them, but how would I know if this still reproduces the problem you are asking about?
– samcarter
Jan 23 at 10:26
Welcome to TeX.Stackexchange! Can you make your example compilable? When I try to run your code I get errors. I can debug them, but how would I know if this still reproduces the problem you are asking about?
– samcarter
Jan 23 at 10:26
Actually, as I know, if two lines overlapping each other in TikZ, they are darkened.
– JouleV
Jan 23 at 10:28
Actually, as I know, if two lines overlapping each other in TikZ, they are darkened.
– JouleV
Jan 23 at 10:28
@samcarter I fixed it, bad copy/paster my bad
– Ricocotam
Jan 23 at 10:34
@samcarter I fixed it, bad copy/paster my bad
– Ricocotam
Jan 23 at 10:34
@joulev That's exactly my problem, I don't want arrows being darkened
– Ricocotam
Jan 23 at 10:35
@joulev That's exactly my problem, I don't want arrows being darkened
– Ricocotam
Jan 23 at 10:35
1
1
Have you tried to print it? There are often aliasing problems with PDF viewers, and the line can seems darker or not depending on the zoom level.
– Rmano
Jan 23 at 10:45
Have you tried to print it? There are often aliasing problems with PDF viewers, and the line can seems darker or not depending on the zoom level.
– Rmano
Jan 23 at 10:45
|
show 1 more comment
2 Answers
2
active
oldest
votes
4
The following example uses the calc library to print each line only once. If you still experience problems with varying line widths this is most probably an issue of your pdf viewer.
documentclass{article}
usepackage[utf8]{inputenc}
usepackage{tikz}
usetikzlibrary{shapes.geometric, arrows, calc}
begin{document}
begin{tikzpicture}[node distance=2.3cm]
% Style
tikzset{
cell/.style={rectangle, minimum width=1.5cm, minimum height=1.5cm, text centered, draw=black, fill=green!20},
tensor/.style={circle, minimum width=1cm, text centered, draw=black, fill=green!10}, arrow/.style={thick,->,>=stealth},
arrow/.style={thick,->,>=stealth}
}
% Nodes
node (he) [tensor] {$h^e$};
node (d1) [cell, right of=he, below of=he, xshift=1.5cm, yshift=-2cm] {$d$};
node (d2) [cell, right of=d1, xshift=1.5cm] {$d$};
node (dn) [cell, right of=d2, xshift=2cm] {$d$};
node (w1) [tensor, above of=d1, left of=d1, minimum width=1.25cm] {$w_1$};
node (w2) [tensor, above of=d2, left of=d2, minimum width=1.25cm] {$w_2$};
node (wn) [tensor, above of=dn, left of=dn, minimum width=1.25cm] {$w_n$};
% Arrows
draw[arrow] (w1) -| (d1);
draw[arrow] (w2) -| (d2);
draw[arrow] (wn) -| (dn);
draw[arrow] (d1) -- (d2);
draw[arrow] (he) |- (d1);
draw[arrow] (he) -| (d1);
draw[arrow] let p1 = (he), p2 = (d1) in (x2,y1) -| (d2);
draw[arrow] let p1 = (he), p2 = (d2) in (x2,y1) -| (dn);
end{tikzpicture}
end{document}
Thanks to @marmot for suggesting this calc free version:
documentclass{article}
usepackage[utf8]{inputenc}
usepackage{tikz}
usetikzlibrary{shapes.geometric, arrows}
begin{document}
begin{tikzpicture}[node distance=2.3cm]
% Style
tikzset{
cell/.style={rectangle, minimum width=1.5cm, minimum height=1.5cm, text centered, draw=black, fill=green!20},
tensor/.style={circle, minimum width=1cm, text centered, draw=black, fill=green!10}, arrow/.style={thick,->,>=stealth},
arrow/.style={thick,->,>=stealth}
}
% Nodes
node (he) [tensor] {$h^e$};
node (d1) [cell, right of=he, below of=he, xshift=1.5cm, yshift=-2cm] {$d$};
node (d2) [cell, right of=d1, xshift=1.5cm] {$d$};
node (dn) [cell, right of=d2, xshift=2cm] {$d$};
node (w1) [tensor, above of=d1, left of=d1, minimum width=1.25cm] {$w_1$};
node (w2) [tensor, above of=d2, left of=d2, minimum width=1.25cm] {$w_2$};
node (wn) [tensor, above of=dn, left of=dn, minimum width=1.25cm] {$w_n$};
% Arrows
draw[arrow] (w1) -| (d1);
draw[arrow] (w2) -| (d2);
draw[arrow] (wn) -| (dn);
draw[arrow] (d1) -- (d2);
draw[arrow] (he) |- (d1);
draw[arrow] (he) -| (d1);
draw[arrow] (d1|-he) -| (d2);
draw[arrow] (d2|-he) -| (dn);
end{tikzpicture}
end{document}
answered Jan 23 at 10:48
samcartersamcarter
1
Thanks a lot, you're awsome ! Could you give a bit background or give some resources so I understand how to reuse this kind of things ?
– Ricocotam
Jan 23 at 10:51
@Ricocotam See tex.stackexchange.com/a/18393/36296 for a short example how the calc library works
– samcarter
Jan 23 at 12:53
1
@marmot Thanks for your suggestions! I just fixed thetikzsetand will soon post a second example without calc.
– samcarter
Jan 23 at 14:43
add a comment |
2
This is what I see (okular) at 100% zoom:
so I can't see any "darkening". Now, zooming in:
This is a rendering/aliasing problem for subpixel zooms, and it is mostly unsolvable (it depends on the anti-aliasing algorithm of the viewer).
answered Jan 23 at 10:49
RmanoRmano
8,07121647
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "85"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f471444%2ftikz-overlapping-arrows-make-them-too-big%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
4
The following example uses the calc library to print each line only once. If you still experience problems with varying line widths this is most probably an issue of your pdf viewer.
documentclass{article}
usepackage[utf8]{inputenc}
usepackage{tikz}
usetikzlibrary{shapes.geometric, arrows, calc}
begin{document}
begin{tikzpicture}[node distance=2.3cm]
% Style
tikzset{
cell/.style={rectangle, minimum width=1.5cm, minimum height=1.5cm, text centered, draw=black, fill=green!20},
tensor/.style={circle, minimum width=1cm, text centered, draw=black, fill=green!10}, arrow/.style={thick,->,>=stealth},
arrow/.style={thick,->,>=stealth}
}
% Nodes
node (he) [tensor] {$h^e$};
node (d1) [cell, right of=he, below of=he, xshift=1.5cm, yshift=-2cm] {$d$};
node (d2) [cell, right of=d1, xshift=1.5cm] {$d$};
node (dn) [cell, right of=d2, xshift=2cm] {$d$};
node (w1) [tensor, above of=d1, left of=d1, minimum width=1.25cm] {$w_1$};
node (w2) [tensor, above of=d2, left of=d2, minimum width=1.25cm] {$w_2$};
node (wn) [tensor, above of=dn, left of=dn, minimum width=1.25cm] {$w_n$};
% Arrows
draw[arrow] (w1) -| (d1);
draw[arrow] (w2) -| (d2);
draw[arrow] (wn) -| (dn);
draw[arrow] (d1) -- (d2);
draw[arrow] (he) |- (d1);
draw[arrow] (he) -| (d1);
draw[arrow] let p1 = (he), p2 = (d1) in (x2,y1) -| (d2);
draw[arrow] let p1 = (he), p2 = (d2) in (x2,y1) -| (dn);
end{tikzpicture}
end{document}
Thanks to @marmot for suggesting this calc free version:
documentclass{article}
usepackage[utf8]{inputenc}
usepackage{tikz}
usetikzlibrary{shapes.geometric, arrows}
begin{document}
begin{tikzpicture}[node distance=2.3cm]
% Style
tikzset{
cell/.style={rectangle, minimum width=1.5cm, minimum height=1.5cm, text centered, draw=black, fill=green!20},
tensor/.style={circle, minimum width=1cm, text centered, draw=black, fill=green!10}, arrow/.style={thick,->,>=stealth},
arrow/.style={thick,->,>=stealth}
}
% Nodes
node (he) [tensor] {$h^e$};
node (d1) [cell, right of=he, below of=he, xshift=1.5cm, yshift=-2cm] {$d$};
node (d2) [cell, right of=d1, xshift=1.5cm] {$d$};
node (dn) [cell, right of=d2, xshift=2cm] {$d$};
node (w1) [tensor, above of=d1, left of=d1, minimum width=1.25cm] {$w_1$};
node (w2) [tensor, above of=d2, left of=d2, minimum width=1.25cm] {$w_2$};
node (wn) [tensor, above of=dn, left of=dn, minimum width=1.25cm] {$w_n$};
% Arrows
draw[arrow] (w1) -| (d1);
draw[arrow] (w2) -| (d2);
draw[arrow] (wn) -| (dn);
draw[arrow] (d1) -- (d2);
draw[arrow] (he) |- (d1);
draw[arrow] (he) -| (d1);
draw[arrow] (d1|-he) -| (d2);
draw[arrow] (d2|-he) -| (dn);
end{tikzpicture}
end{document}
answered Jan 23 at 10:48
samcartersamcarter
1
Thanks a lot, you're awsome ! Could you give a bit background or give some resources so I understand how to reuse this kind of things ?
– Ricocotam
Jan 23 at 10:51
@Ricocotam See tex.stackexchange.com/a/18393/36296 for a short example how the calc library works
– samcarter
Jan 23 at 12:53
1
@marmot Thanks for your suggestions! I just fixed thetikzsetand will soon post a second example without calc.
– samcarter
Jan 23 at 14:43
add a comment |
4
The following example uses the calc library to print each line only once. If you still experience problems with varying line widths this is most probably an issue of your pdf viewer.
documentclass{article}
usepackage[utf8]{inputenc}
usepackage{tikz}
usetikzlibrary{shapes.geometric, arrows, calc}
begin{document}
begin{tikzpicture}[node distance=2.3cm]
% Style
tikzset{
cell/.style={rectangle, minimum width=1.5cm, minimum height=1.5cm, text centered, draw=black, fill=green!20},
tensor/.style={circle, minimum width=1cm, text centered, draw=black, fill=green!10}, arrow/.style={thick,->,>=stealth},
arrow/.style={thick,->,>=stealth}
}
% Nodes
node (he) [tensor] {$h^e$};
node (d1) [cell, right of=he, below of=he, xshift=1.5cm, yshift=-2cm] {$d$};
node (d2) [cell, right of=d1, xshift=1.5cm] {$d$};
node (dn) [cell, right of=d2, xshift=2cm] {$d$};
node (w1) [tensor, above of=d1, left of=d1, minimum width=1.25cm] {$w_1$};
node (w2) [tensor, above of=d2, left of=d2, minimum width=1.25cm] {$w_2$};
node (wn) [tensor, above of=dn, left of=dn, minimum width=1.25cm] {$w_n$};
% Arrows
draw[arrow] (w1) -| (d1);
draw[arrow] (w2) -| (d2);
draw[arrow] (wn) -| (dn);
draw[arrow] (d1) -- (d2);
draw[arrow] (he) |- (d1);
draw[arrow] (he) -| (d1);
draw[arrow] let p1 = (he), p2 = (d1) in (x2,y1) -| (d2);
draw[arrow] let p1 = (he), p2 = (d2) in (x2,y1) -| (dn);
end{tikzpicture}
end{document}
Thanks to @marmot for suggesting this calc free version:
documentclass{article}
usepackage[utf8]{inputenc}
usepackage{tikz}
usetikzlibrary{shapes.geometric, arrows}
begin{document}
begin{tikzpicture}[node distance=2.3cm]
% Style
tikzset{
cell/.style={rectangle, minimum width=1.5cm, minimum height=1.5cm, text centered, draw=black, fill=green!20},
tensor/.style={circle, minimum width=1cm, text centered, draw=black, fill=green!10}, arrow/.style={thick,->,>=stealth},
arrow/.style={thick,->,>=stealth}
}
% Nodes
node (he) [tensor] {$h^e$};
node (d1) [cell, right of=he, below of=he, xshift=1.5cm, yshift=-2cm] {$d$};
node (d2) [cell, right of=d1, xshift=1.5cm] {$d$};
node (dn) [cell, right of=d2, xshift=2cm] {$d$};
node (w1) [tensor, above of=d1, left of=d1, minimum width=1.25cm] {$w_1$};
node (w2) [tensor, above of=d2, left of=d2, minimum width=1.25cm] {$w_2$};
node (wn) [tensor, above of=dn, left of=dn, minimum width=1.25cm] {$w_n$};
% Arrows
draw[arrow] (w1) -| (d1);
draw[arrow] (w2) -| (d2);
draw[arrow] (wn) -| (dn);
draw[arrow] (d1) -- (d2);
draw[arrow] (he) |- (d1);
draw[arrow] (he) -| (d1);
draw[arrow] (d1|-he) -| (d2);
draw[arrow] (d2|-he) -| (dn);
end{tikzpicture}
end{document}
answered Jan 23 at 10:48
samcartersamcarter
1
Thanks a lot, you're awsome ! Could you give a bit background or give some resources so I understand how to reuse this kind of things ?
– Ricocotam
Jan 23 at 10:51
@Ricocotam See tex.stackexchange.com/a/18393/36296 for a short example how the calc library works
– samcarter
Jan 23 at 12:53
1
@marmot Thanks for your suggestions! I just fixed thetikzsetand will soon post a second example without calc.
– samcarter
Jan 23 at 14:43
add a comment |
4
4
4
The following example uses the calc library to print each line only once. If you still experience problems with varying line widths this is most probably an issue of your pdf viewer.
documentclass{article}
usepackage[utf8]{inputenc}
usepackage{tikz}
usetikzlibrary{shapes.geometric, arrows, calc}
begin{document}
begin{tikzpicture}[node distance=2.3cm]
% Style
tikzset{
cell/.style={rectangle, minimum width=1.5cm, minimum height=1.5cm, text centered, draw=black, fill=green!20},
tensor/.style={circle, minimum width=1cm, text centered, draw=black, fill=green!10}, arrow/.style={thick,->,>=stealth},
arrow/.style={thick,->,>=stealth}
}
% Nodes
node (he) [tensor] {$h^e$};
node (d1) [cell, right of=he, below of=he, xshift=1.5cm, yshift=-2cm] {$d$};
node (d2) [cell, right of=d1, xshift=1.5cm] {$d$};
node (dn) [cell, right of=d2, xshift=2cm] {$d$};
node (w1) [tensor, above of=d1, left of=d1, minimum width=1.25cm] {$w_1$};
node (w2) [tensor, above of=d2, left of=d2, minimum width=1.25cm] {$w_2$};
node (wn) [tensor, above of=dn, left of=dn, minimum width=1.25cm] {$w_n$};
% Arrows
draw[arrow] (w1) -| (d1);
draw[arrow] (w2) -| (d2);
draw[arrow] (wn) -| (dn);
draw[arrow] (d1) -- (d2);
draw[arrow] (he) |- (d1);
draw[arrow] (he) -| (d1);
draw[arrow] let p1 = (he), p2 = (d1) in (x2,y1) -| (d2);
draw[arrow] let p1 = (he), p2 = (d2) in (x2,y1) -| (dn);
end{tikzpicture}
end{document}
Thanks to @marmot for suggesting this calc free version:
documentclass{article}
usepackage[utf8]{inputenc}
usepackage{tikz}
usetikzlibrary{shapes.geometric, arrows}
begin{document}
begin{tikzpicture}[node distance=2.3cm]
% Style
tikzset{
cell/.style={rectangle, minimum width=1.5cm, minimum height=1.5cm, text centered, draw=black, fill=green!20},
tensor/.style={circle, minimum width=1cm, text centered, draw=black, fill=green!10}, arrow/.style={thick,->,>=stealth},
arrow/.style={thick,->,>=stealth}
}
% Nodes
node (he) [tensor] {$h^e$};
node (d1) [cell, right of=he, below of=he, xshift=1.5cm, yshift=-2cm] {$d$};
node (d2) [cell, right of=d1, xshift=1.5cm] {$d$};
node (dn) [cell, right of=d2, xshift=2cm] {$d$};
node (w1) [tensor, above of=d1, left of=d1, minimum width=1.25cm] {$w_1$};
node (w2) [tensor, above of=d2, left of=d2, minimum width=1.25cm] {$w_2$};
node (wn) [tensor, above of=dn, left of=dn, minimum width=1.25cm] {$w_n$};
% Arrows
draw[arrow] (w1) -| (d1);
draw[arrow] (w2) -| (d2);
draw[arrow] (wn) -| (dn);
draw[arrow] (d1) -- (d2);
draw[arrow] (he) |- (d1);
draw[arrow] (he) -| (d1);
draw[arrow] (d1|-he) -| (d2);
draw[arrow] (d2|-he) -| (dn);
end{tikzpicture}
end{document}
answered Jan 23 at 10:48
samcartersamcarter
1
The following example uses the calc library to print each line only once. If you still experience problems with varying line widths this is most probably an issue of your pdf viewer.
documentclass{article}
usepackage[utf8]{inputenc}
usepackage{tikz}
usetikzlibrary{shapes.geometric, arrows, calc}
begin{document}
begin{tikzpicture}[node distance=2.3cm]
% Style
tikzset{
cell/.style={rectangle, minimum width=1.5cm, minimum height=1.5cm, text centered, draw=black, fill=green!20},
tensor/.style={circle, minimum width=1cm, text centered, draw=black, fill=green!10}, arrow/.style={thick,->,>=stealth},
arrow/.style={thick,->,>=stealth}
}
% Nodes
node (he) [tensor] {$h^e$};
node (d1) [cell, right of=he, below of=he, xshift=1.5cm, yshift=-2cm] {$d$};
node (d2) [cell, right of=d1, xshift=1.5cm] {$d$};
node (dn) [cell, right of=d2, xshift=2cm] {$d$};
node (w1) [tensor, above of=d1, left of=d1, minimum width=1.25cm] {$w_1$};
node (w2) [tensor, above of=d2, left of=d2, minimum width=1.25cm] {$w_2$};
node (wn) [tensor, above of=dn, left of=dn, minimum width=1.25cm] {$w_n$};
% Arrows
draw[arrow] (w1) -| (d1);
draw[arrow] (w2) -| (d2);
draw[arrow] (wn) -| (dn);
draw[arrow] (d1) -- (d2);
draw[arrow] (he) |- (d1);
draw[arrow] (he) -| (d1);
draw[arrow] let p1 = (he), p2 = (d1) in (x2,y1) -| (d2);
draw[arrow] let p1 = (he), p2 = (d2) in (x2,y1) -| (dn);
end{tikzpicture}
end{document}
Thanks to @marmot for suggesting this calc free version:
documentclass{article}
usepackage[utf8]{inputenc}
usepackage{tikz}
usetikzlibrary{shapes.geometric, arrows}
begin{document}
begin{tikzpicture}[node distance=2.3cm]
% Style
tikzset{
cell/.style={rectangle, minimum width=1.5cm, minimum height=1.5cm, text centered, draw=black, fill=green!20},
tensor/.style={circle, minimum width=1cm, text centered, draw=black, fill=green!10}, arrow/.style={thick,->,>=stealth},
arrow/.style={thick,->,>=stealth}
}
% Nodes
node (he) [tensor] {$h^e$};
node (d1) [cell, right of=he, below of=he, xshift=1.5cm, yshift=-2cm] {$d$};
node (d2) [cell, right of=d1, xshift=1.5cm] {$d$};
node (dn) [cell, right of=d2, xshift=2cm] {$d$};
node (w1) [tensor, above of=d1, left of=d1, minimum width=1.25cm] {$w_1$};
node (w2) [tensor, above of=d2, left of=d2, minimum width=1.25cm] {$w_2$};
node (wn) [tensor, above of=dn, left of=dn, minimum width=1.25cm] {$w_n$};
% Arrows
draw[arrow] (w1) -| (d1);
draw[arrow] (w2) -| (d2);
draw[arrow] (wn) -| (dn);
draw[arrow] (d1) -- (d2);
draw[arrow] (he) |- (d1);
draw[arrow] (he) -| (d1);
draw[arrow] (d1|-he) -| (d2);
draw[arrow] (d2|-he) -| (dn);
end{tikzpicture}
end{document}
answered Jan 23 at 10:48
samcartersamcarter
1
edited Jan 23 at 14:42
answered Jan 23 at 10:48
samcartersamcarter
1
answered Jan 23 at 10:48
samcartersamcarter
1
answered Jan 23 at 10:48
samcartersamcarter
1
1
Thanks a lot, you're awsome ! Could you give a bit background or give some resources so I understand how to reuse this kind of things ?
– Ricocotam
Jan 23 at 10:51
@Ricocotam See tex.stackexchange.com/a/18393/36296 for a short example how the calc library works
– samcarter
Jan 23 at 12:53
1
@marmot Thanks for your suggestions! I just fixed thetikzsetand will soon post a second example without calc.
– samcarter
Jan 23 at 14:43
add a comment |
Thanks a lot, you're awsome ! Could you give a bit background or give some resources so I understand how to reuse this kind of things ?
– Ricocotam
Jan 23 at 10:51
@Ricocotam See tex.stackexchange.com/a/18393/36296 for a short example how the calc library works
– samcarter
Jan 23 at 12:53
1
@marmot Thanks for your suggestions! I just fixed thetikzsetand will soon post a second example without calc.
– samcarter
Jan 23 at 14:43
Thanks a lot, you're awsome ! Could you give a bit background or give some resources so I understand how to reuse this kind of things ?
– Ricocotam
Jan 23 at 10:51
Thanks a lot, you're awsome ! Could you give a bit background or give some resources so I understand how to reuse this kind of things ?
– Ricocotam
Jan 23 at 10:51
@Ricocotam See tex.stackexchange.com/a/18393/36296 for a short example how the calc library works
– samcarter
Jan 23 at 12:53
@Ricocotam See tex.stackexchange.com/a/18393/36296 for a short example how the calc library works
– samcarter
Jan 23 at 12:53
1
1
@marmot Thanks for your suggestions! I just fixed the
tikzset and will soon post a second example without calc.– samcarter
Jan 23 at 14:43
@marmot Thanks for your suggestions! I just fixed the
tikzset and will soon post a second example without calc.– samcarter
Jan 23 at 14:43
add a comment |
2
This is what I see (okular) at 100% zoom:
so I can't see any "darkening". Now, zooming in:
This is a rendering/aliasing problem for subpixel zooms, and it is mostly unsolvable (it depends on the anti-aliasing algorithm of the viewer).
answered Jan 23 at 10:49
RmanoRmano
8,07121647
add a comment |
2
This is what I see (okular) at 100% zoom:
so I can't see any "darkening". Now, zooming in:
This is a rendering/aliasing problem for subpixel zooms, and it is mostly unsolvable (it depends on the anti-aliasing algorithm of the viewer).
answered Jan 23 at 10:49
RmanoRmano
8,07121647
add a comment |
2
2
2
This is what I see (okular) at 100% zoom:
so I can't see any "darkening". Now, zooming in:
This is a rendering/aliasing problem for subpixel zooms, and it is mostly unsolvable (it depends on the anti-aliasing algorithm of the viewer).
answered Jan 23 at 10:49
RmanoRmano
8,07121647
This is what I see (okular) at 100% zoom:
so I can't see any "darkening". Now, zooming in:
This is a rendering/aliasing problem for subpixel zooms, and it is mostly unsolvable (it depends on the anti-aliasing algorithm of the viewer).
answered Jan 23 at 10:49
RmanoRmano
8,07121647
answered Jan 23 at 10:49
RmanoRmano
8,07121647
answered Jan 23 at 10:49
RmanoRmano
8,07121647
answered Jan 23 at 10:49
RmanoRmano
8,07121647
8,07121647
add a comment |
add a comment |
draft saved
draft discarded
Thanks for contributing an answer to TeX - LaTeX Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f471444%2ftikz-overlapping-arrows-make-them-too-big%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Welcome to TeX.Stackexchange! Can you make your example compilable? When I try to run your code I get errors. I can debug them, but how would I know if this still reproduces the problem you are asking about?
– samcarter
Jan 23 at 10:26
Actually, as I know, if two lines overlapping each other in TikZ, they are darkened.
– JouleV
Jan 23 at 10:28
@samcarter I fixed it, bad copy/paster my bad
– Ricocotam
Jan 23 at 10:34
@joulev That's exactly my problem, I don't want arrows being darkened
– Ricocotam
Jan 23 at 10:35
1
Have you tried to print it? There are often aliasing problems with PDF viewers, and the line can seems darker or not depending on the zoom level.
– Rmano
Jan 23 at 10:45