“drm:[drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC6]” during install

Multi tool use
I have a desktop PC which I built a while back. It has an Athlon XP 2500+, 2.5GB RAM, and an Nvidia (PNY Verto) Geforce 6200. I removed the CD drive to add another hard drive so I install from a USB flash drive.
When I try to install 12.04 it seems to work just fine. The GUI boots up and wifi even connects to my router. I go through the language screen, the partition screen, the keyboard screen, the location screen, and the import my Windows settings screen just fine.
But as soon as I'm done with all that the next screen goes black and displays this message:
drm:[drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC6]
Since the GUI starts just fine earlier during the install, I know I shouldn't be having any display problems, but I am. How do I get Ubuntu to install properly?
I have four IDE hard drives, all Western Digital: a 250GB, a 160GB, a 40GB occupied by Windows XP, and a 120GB that I'm trying to use for Ubuntu. 3GB of the 120GB drive are formatted for swap.
I have checked the MD5sum of install image file and it all matches up.
d791352694374f1c478779f7f4447a3f ubuntu-12.04-desktop-i386.iso
12.04 system-installation display 32-bit
add a comment |
I have a desktop PC which I built a while back. It has an Athlon XP 2500+, 2.5GB RAM, and an Nvidia (PNY Verto) Geforce 6200. I removed the CD drive to add another hard drive so I install from a USB flash drive.
When I try to install 12.04 it seems to work just fine. The GUI boots up and wifi even connects to my router. I go through the language screen, the partition screen, the keyboard screen, the location screen, and the import my Windows settings screen just fine.
But as soon as I'm done with all that the next screen goes black and displays this message:
drm:[drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC6]
Since the GUI starts just fine earlier during the install, I know I shouldn't be having any display problems, but I am. How do I get Ubuntu to install properly?
I have four IDE hard drives, all Western Digital: a 250GB, a 160GB, a 40GB occupied by Windows XP, and a 120GB that I'm trying to use for Ubuntu. 3GB of the 120GB drive are formatted for swap.
I have checked the MD5sum of install image file and it all matches up.
d791352694374f1c478779f7f4447a3f ubuntu-12.04-desktop-i386.iso
12.04 system-installation display 32-bit
add a comment |
I have a desktop PC which I built a while back. It has an Athlon XP 2500+, 2.5GB RAM, and an Nvidia (PNY Verto) Geforce 6200. I removed the CD drive to add another hard drive so I install from a USB flash drive.
When I try to install 12.04 it seems to work just fine. The GUI boots up and wifi even connects to my router. I go through the language screen, the partition screen, the keyboard screen, the location screen, and the import my Windows settings screen just fine.
But as soon as I'm done with all that the next screen goes black and displays this message:
drm:[drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC6]
Since the GUI starts just fine earlier during the install, I know I shouldn't be having any display problems, but I am. How do I get Ubuntu to install properly?
I have four IDE hard drives, all Western Digital: a 250GB, a 160GB, a 40GB occupied by Windows XP, and a 120GB that I'm trying to use for Ubuntu. 3GB of the 120GB drive are formatted for swap.
I have checked the MD5sum of install image file and it all matches up.
d791352694374f1c478779f7f4447a3f ubuntu-12.04-desktop-i386.iso
12.04 system-installation display 32-bit
I have a desktop PC which I built a while back. It has an Athlon XP 2500+, 2.5GB RAM, and an Nvidia (PNY Verto) Geforce 6200. I removed the CD drive to add another hard drive so I install from a USB flash drive.
When I try to install 12.04 it seems to work just fine. The GUI boots up and wifi even connects to my router. I go through the language screen, the partition screen, the keyboard screen, the location screen, and the import my Windows settings screen just fine.
But as soon as I'm done with all that the next screen goes black and displays this message:
drm:[drm_crtc_helper_set_config] *ERROR* failed to set mode on [CRTC6]
Since the GUI starts just fine earlier during the install, I know I shouldn't be having any display problems, but I am. How do I get Ubuntu to install properly?
I have four IDE hard drives, all Western Digital: a 250GB, a 160GB, a 40GB occupied by Windows XP, and a 120GB that I'm trying to use for Ubuntu. 3GB of the 120GB drive are formatted for swap.
I have checked the MD5sum of install image file and it all matches up.
d791352694374f1c478779f7f4447a3f ubuntu-12.04-desktop-i386.iso
12.04 system-installation display 32-bit
12.04 system-installation display 32-bit
edited Jul 9 '14 at 20:39
Tim
19.6k1484139
19.6k1484139
asked May 10 '12 at 23:42
Warez J. Coxtrong
1113
1113
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
This is a long shot, but it might be worth trying just to conclusively rule it out.
Have you tried adding the kernel option/parameter nomodeset
when you boot your install media?
If you need more detail on how to do this try looking at this answer to another question.
BTW, you are not using multiple monitors, are you? If so, then perhaps try disconnecting all but one of them during the install? (He's been there, done that. No joy.)
Perhaps try the Alternate Install?
I'm not sure if this is a "good" suggestion but, like nomodeset
, it might be worth at least trying.
The description of the Alternate Install media on the Ubuntu community wiki says:
It may happen occasionally that your computer is not able to run the standard Desktop installation CD because it does not meet the hardware requirements, or the required drivers are missing from the standard LiveCD. ... The Alternate CD allows more advanced installation options which are not available with the Standard LiveCD.
The Alternate install ISO does a text mode install.
If you decide to try it you can obtain the Alternate install ISO from
the Ubuntu 12.04 LTS releases page.
Yes,I am using dual monitors,plus a TV via S-Video my card has a DVI plug,a VGA plug,and an S-Video plug.The monitor plugged into the DVI plug is plugged in with a DVI-VGA adapter.Tried with each monitors separately,S-Video disconnected,and on the DVI,with both the monitor and adapter disconnected.When the only monitor plugged in is in the DVI adapter,Get the same error when the monitor is plugged in to the VGA plug,I didn't see an error,but the install did basically the same thing. On both,or with dual monitors, the mouse pointer with the loading icon is still on the screen and can be moved.
– Warez J. Coxtrong
May 11 '12 at 2:35
The install doesn't give me the popup with options when I hit F6, so I edited the parameters this time and put --nomodeset at the end. Guess I'll know more in a few minutes.
– Warez J. Coxtrong
May 11 '12 at 2:42
OK, when the only monitor plugged in is in the VGA port, I don't get an error message. Right after the "import windows settings" screen, the dialog box goes away, shows the wallpaper and top bar for a couple seconds, then the screen goes black. I switched terminals, ran dmesg, and I get this on the last line- init: lightdm main process (10949) terminated with status 1 Before that it's just messages regarding the filesystem, which I'm pretty sure just have to do with creating/preparing partitions from when the GUI was still up.
– Warez J. Coxtrong
May 11 '12 at 2:55
I edited my answer but I don't think you are notified unless I add a comment.
– irrational John
May 11 '12 at 3:01
ah ok. I'll try that if this doesn't work. I put the nomodeset directly after splash, before the -- and it seems to be doing something different now. the loading screen said Ubuntu 12.04 instead of just the Ubuntu logo, and seemed to be at a lower resolution. I've got a black box surrounding the screen now, so I'm thinking definitely at a lower resolution. I'm going to run through this real fast and see if it works.
– Warez J. Coxtrong
May 11 '12 at 3:06
|
show 7 more comments
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f135236%2fdrmdrm-crtc-helper-set-config-error-failed-to-set-mode-on-crtc6-during%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
This is a long shot, but it might be worth trying just to conclusively rule it out.
Have you tried adding the kernel option/parameter nomodeset
when you boot your install media?
If you need more detail on how to do this try looking at this answer to another question.
BTW, you are not using multiple monitors, are you? If so, then perhaps try disconnecting all but one of them during the install? (He's been there, done that. No joy.)
Perhaps try the Alternate Install?
I'm not sure if this is a "good" suggestion but, like nomodeset
, it might be worth at least trying.
The description of the Alternate Install media on the Ubuntu community wiki says:
It may happen occasionally that your computer is not able to run the standard Desktop installation CD because it does not meet the hardware requirements, or the required drivers are missing from the standard LiveCD. ... The Alternate CD allows more advanced installation options which are not available with the Standard LiveCD.
The Alternate install ISO does a text mode install.
If you decide to try it you can obtain the Alternate install ISO from
the Ubuntu 12.04 LTS releases page.
Yes,I am using dual monitors,plus a TV via S-Video my card has a DVI plug,a VGA plug,and an S-Video plug.The monitor plugged into the DVI plug is plugged in with a DVI-VGA adapter.Tried with each monitors separately,S-Video disconnected,and on the DVI,with both the monitor and adapter disconnected.When the only monitor plugged in is in the DVI adapter,Get the same error when the monitor is plugged in to the VGA plug,I didn't see an error,but the install did basically the same thing. On both,or with dual monitors, the mouse pointer with the loading icon is still on the screen and can be moved.
– Warez J. Coxtrong
May 11 '12 at 2:35
The install doesn't give me the popup with options when I hit F6, so I edited the parameters this time and put --nomodeset at the end. Guess I'll know more in a few minutes.
– Warez J. Coxtrong
May 11 '12 at 2:42
OK, when the only monitor plugged in is in the VGA port, I don't get an error message. Right after the "import windows settings" screen, the dialog box goes away, shows the wallpaper and top bar for a couple seconds, then the screen goes black. I switched terminals, ran dmesg, and I get this on the last line- init: lightdm main process (10949) terminated with status 1 Before that it's just messages regarding the filesystem, which I'm pretty sure just have to do with creating/preparing partitions from when the GUI was still up.
– Warez J. Coxtrong
May 11 '12 at 2:55
I edited my answer but I don't think you are notified unless I add a comment.
– irrational John
May 11 '12 at 3:01
ah ok. I'll try that if this doesn't work. I put the nomodeset directly after splash, before the -- and it seems to be doing something different now. the loading screen said Ubuntu 12.04 instead of just the Ubuntu logo, and seemed to be at a lower resolution. I've got a black box surrounding the screen now, so I'm thinking definitely at a lower resolution. I'm going to run through this real fast and see if it works.
– Warez J. Coxtrong
May 11 '12 at 3:06
|
show 7 more comments
This is a long shot, but it might be worth trying just to conclusively rule it out.
Have you tried adding the kernel option/parameter nomodeset
when you boot your install media?
If you need more detail on how to do this try looking at this answer to another question.
BTW, you are not using multiple monitors, are you? If so, then perhaps try disconnecting all but one of them during the install? (He's been there, done that. No joy.)
Perhaps try the Alternate Install?
I'm not sure if this is a "good" suggestion but, like nomodeset
, it might be worth at least trying.
The description of the Alternate Install media on the Ubuntu community wiki says:
It may happen occasionally that your computer is not able to run the standard Desktop installation CD because it does not meet the hardware requirements, or the required drivers are missing from the standard LiveCD. ... The Alternate CD allows more advanced installation options which are not available with the Standard LiveCD.
The Alternate install ISO does a text mode install.
If you decide to try it you can obtain the Alternate install ISO from
the Ubuntu 12.04 LTS releases page.
Yes,I am using dual monitors,plus a TV via S-Video my card has a DVI plug,a VGA plug,and an S-Video plug.The monitor plugged into the DVI plug is plugged in with a DVI-VGA adapter.Tried with each monitors separately,S-Video disconnected,and on the DVI,with both the monitor and adapter disconnected.When the only monitor plugged in is in the DVI adapter,Get the same error when the monitor is plugged in to the VGA plug,I didn't see an error,but the install did basically the same thing. On both,or with dual monitors, the mouse pointer with the loading icon is still on the screen and can be moved.
– Warez J. Coxtrong
May 11 '12 at 2:35
The install doesn't give me the popup with options when I hit F6, so I edited the parameters this time and put --nomodeset at the end. Guess I'll know more in a few minutes.
– Warez J. Coxtrong
May 11 '12 at 2:42
OK, when the only monitor plugged in is in the VGA port, I don't get an error message. Right after the "import windows settings" screen, the dialog box goes away, shows the wallpaper and top bar for a couple seconds, then the screen goes black. I switched terminals, ran dmesg, and I get this on the last line- init: lightdm main process (10949) terminated with status 1 Before that it's just messages regarding the filesystem, which I'm pretty sure just have to do with creating/preparing partitions from when the GUI was still up.
– Warez J. Coxtrong
May 11 '12 at 2:55
I edited my answer but I don't think you are notified unless I add a comment.
– irrational John
May 11 '12 at 3:01
ah ok. I'll try that if this doesn't work. I put the nomodeset directly after splash, before the -- and it seems to be doing something different now. the loading screen said Ubuntu 12.04 instead of just the Ubuntu logo, and seemed to be at a lower resolution. I've got a black box surrounding the screen now, so I'm thinking definitely at a lower resolution. I'm going to run through this real fast and see if it works.
– Warez J. Coxtrong
May 11 '12 at 3:06
|
show 7 more comments
This is a long shot, but it might be worth trying just to conclusively rule it out.
Have you tried adding the kernel option/parameter nomodeset
when you boot your install media?
If you need more detail on how to do this try looking at this answer to another question.
BTW, you are not using multiple monitors, are you? If so, then perhaps try disconnecting all but one of them during the install? (He's been there, done that. No joy.)
Perhaps try the Alternate Install?
I'm not sure if this is a "good" suggestion but, like nomodeset
, it might be worth at least trying.
The description of the Alternate Install media on the Ubuntu community wiki says:
It may happen occasionally that your computer is not able to run the standard Desktop installation CD because it does not meet the hardware requirements, or the required drivers are missing from the standard LiveCD. ... The Alternate CD allows more advanced installation options which are not available with the Standard LiveCD.
The Alternate install ISO does a text mode install.
If you decide to try it you can obtain the Alternate install ISO from
the Ubuntu 12.04 LTS releases page.
This is a long shot, but it might be worth trying just to conclusively rule it out.
Have you tried adding the kernel option/parameter nomodeset
when you boot your install media?
If you need more detail on how to do this try looking at this answer to another question.
BTW, you are not using multiple monitors, are you? If so, then perhaps try disconnecting all but one of them during the install? (He's been there, done that. No joy.)
Perhaps try the Alternate Install?
I'm not sure if this is a "good" suggestion but, like nomodeset
, it might be worth at least trying.
The description of the Alternate Install media on the Ubuntu community wiki says:
It may happen occasionally that your computer is not able to run the standard Desktop installation CD because it does not meet the hardware requirements, or the required drivers are missing from the standard LiveCD. ... The Alternate CD allows more advanced installation options which are not available with the Standard LiveCD.
The Alternate install ISO does a text mode install.
If you decide to try it you can obtain the Alternate install ISO from
the Ubuntu 12.04 LTS releases page.
edited Apr 13 '17 at 12:23
Community♦
1
1
answered May 11 '12 at 2:21
irrational John
4,13321352
4,13321352
Yes,I am using dual monitors,plus a TV via S-Video my card has a DVI plug,a VGA plug,and an S-Video plug.The monitor plugged into the DVI plug is plugged in with a DVI-VGA adapter.Tried with each monitors separately,S-Video disconnected,and on the DVI,with both the monitor and adapter disconnected.When the only monitor plugged in is in the DVI adapter,Get the same error when the monitor is plugged in to the VGA plug,I didn't see an error,but the install did basically the same thing. On both,or with dual monitors, the mouse pointer with the loading icon is still on the screen and can be moved.
– Warez J. Coxtrong
May 11 '12 at 2:35
The install doesn't give me the popup with options when I hit F6, so I edited the parameters this time and put --nomodeset at the end. Guess I'll know more in a few minutes.
– Warez J. Coxtrong
May 11 '12 at 2:42
OK, when the only monitor plugged in is in the VGA port, I don't get an error message. Right after the "import windows settings" screen, the dialog box goes away, shows the wallpaper and top bar for a couple seconds, then the screen goes black. I switched terminals, ran dmesg, and I get this on the last line- init: lightdm main process (10949) terminated with status 1 Before that it's just messages regarding the filesystem, which I'm pretty sure just have to do with creating/preparing partitions from when the GUI was still up.
– Warez J. Coxtrong
May 11 '12 at 2:55
I edited my answer but I don't think you are notified unless I add a comment.
– irrational John
May 11 '12 at 3:01
ah ok. I'll try that if this doesn't work. I put the nomodeset directly after splash, before the -- and it seems to be doing something different now. the loading screen said Ubuntu 12.04 instead of just the Ubuntu logo, and seemed to be at a lower resolution. I've got a black box surrounding the screen now, so I'm thinking definitely at a lower resolution. I'm going to run through this real fast and see if it works.
– Warez J. Coxtrong
May 11 '12 at 3:06
|
show 7 more comments
Yes,I am using dual monitors,plus a TV via S-Video my card has a DVI plug,a VGA plug,and an S-Video plug.The monitor plugged into the DVI plug is plugged in with a DVI-VGA adapter.Tried with each monitors separately,S-Video disconnected,and on the DVI,with both the monitor and adapter disconnected.When the only monitor plugged in is in the DVI adapter,Get the same error when the monitor is plugged in to the VGA plug,I didn't see an error,but the install did basically the same thing. On both,or with dual monitors, the mouse pointer with the loading icon is still on the screen and can be moved.
– Warez J. Coxtrong
May 11 '12 at 2:35
The install doesn't give me the popup with options when I hit F6, so I edited the parameters this time and put --nomodeset at the end. Guess I'll know more in a few minutes.
– Warez J. Coxtrong
May 11 '12 at 2:42
OK, when the only monitor plugged in is in the VGA port, I don't get an error message. Right after the "import windows settings" screen, the dialog box goes away, shows the wallpaper and top bar for a couple seconds, then the screen goes black. I switched terminals, ran dmesg, and I get this on the last line- init: lightdm main process (10949) terminated with status 1 Before that it's just messages regarding the filesystem, which I'm pretty sure just have to do with creating/preparing partitions from when the GUI was still up.
– Warez J. Coxtrong
May 11 '12 at 2:55
I edited my answer but I don't think you are notified unless I add a comment.
– irrational John
May 11 '12 at 3:01
ah ok. I'll try that if this doesn't work. I put the nomodeset directly after splash, before the -- and it seems to be doing something different now. the loading screen said Ubuntu 12.04 instead of just the Ubuntu logo, and seemed to be at a lower resolution. I've got a black box surrounding the screen now, so I'm thinking definitely at a lower resolution. I'm going to run through this real fast and see if it works.
– Warez J. Coxtrong
May 11 '12 at 3:06
Yes,I am using dual monitors,plus a TV via S-Video my card has a DVI plug,a VGA plug,and an S-Video plug.The monitor plugged into the DVI plug is plugged in with a DVI-VGA adapter.Tried with each monitors separately,S-Video disconnected,and on the DVI,with both the monitor and adapter disconnected.When the only monitor plugged in is in the DVI adapter,Get the same error when the monitor is plugged in to the VGA plug,I didn't see an error,but the install did basically the same thing. On both,or with dual monitors, the mouse pointer with the loading icon is still on the screen and can be moved.
– Warez J. Coxtrong
May 11 '12 at 2:35
Yes,I am using dual monitors,plus a TV via S-Video my card has a DVI plug,a VGA plug,and an S-Video plug.The monitor plugged into the DVI plug is plugged in with a DVI-VGA adapter.Tried with each monitors separately,S-Video disconnected,and on the DVI,with both the monitor and adapter disconnected.When the only monitor plugged in is in the DVI adapter,Get the same error when the monitor is plugged in to the VGA plug,I didn't see an error,but the install did basically the same thing. On both,or with dual monitors, the mouse pointer with the loading icon is still on the screen and can be moved.
– Warez J. Coxtrong
May 11 '12 at 2:35
The install doesn't give me the popup with options when I hit F6, so I edited the parameters this time and put --nomodeset at the end. Guess I'll know more in a few minutes.
– Warez J. Coxtrong
May 11 '12 at 2:42
The install doesn't give me the popup with options when I hit F6, so I edited the parameters this time and put --nomodeset at the end. Guess I'll know more in a few minutes.
– Warez J. Coxtrong
May 11 '12 at 2:42
OK, when the only monitor plugged in is in the VGA port, I don't get an error message. Right after the "import windows settings" screen, the dialog box goes away, shows the wallpaper and top bar for a couple seconds, then the screen goes black. I switched terminals, ran dmesg, and I get this on the last line- init: lightdm main process (10949) terminated with status 1 Before that it's just messages regarding the filesystem, which I'm pretty sure just have to do with creating/preparing partitions from when the GUI was still up.
– Warez J. Coxtrong
May 11 '12 at 2:55
OK, when the only monitor plugged in is in the VGA port, I don't get an error message. Right after the "import windows settings" screen, the dialog box goes away, shows the wallpaper and top bar for a couple seconds, then the screen goes black. I switched terminals, ran dmesg, and I get this on the last line- init: lightdm main process (10949) terminated with status 1 Before that it's just messages regarding the filesystem, which I'm pretty sure just have to do with creating/preparing partitions from when the GUI was still up.
– Warez J. Coxtrong
May 11 '12 at 2:55
I edited my answer but I don't think you are notified unless I add a comment.
– irrational John
May 11 '12 at 3:01
I edited my answer but I don't think you are notified unless I add a comment.
– irrational John
May 11 '12 at 3:01
ah ok. I'll try that if this doesn't work. I put the nomodeset directly after splash, before the -- and it seems to be doing something different now. the loading screen said Ubuntu 12.04 instead of just the Ubuntu logo, and seemed to be at a lower resolution. I've got a black box surrounding the screen now, so I'm thinking definitely at a lower resolution. I'm going to run through this real fast and see if it works.
– Warez J. Coxtrong
May 11 '12 at 3:06
ah ok. I'll try that if this doesn't work. I put the nomodeset directly after splash, before the -- and it seems to be doing something different now. the loading screen said Ubuntu 12.04 instead of just the Ubuntu logo, and seemed to be at a lower resolution. I've got a black box surrounding the screen now, so I'm thinking definitely at a lower resolution. I'm going to run through this real fast and see if it works.
– Warez J. Coxtrong
May 11 '12 at 3:06
|
show 7 more comments
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f135236%2fdrmdrm-crtc-helper-set-config-error-failed-to-set-mode-on-crtc6-during%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
m152 qrg8qLrBB92xUY9,u qQq q4L7xu7ypRK